Data transmissions - Import export

We can customised everything on your cables

Our wireless SureCross system enables simple and fast transmission of process data from the field to higher level control systems. In both versions, DX70 for simple cable replacement as well as in DX80 for a complex network, gateways communicate through radio signals with the nodes in the field and transfer the signals of the field devices to the controller.

Save 88% assembly time with cost-effective energy chain for intralogistics and crane systems. The igus autoglide 5 system transfers energy, data, fluids, and air safely in a single system, requires almost no maintenance, and is also very cost-effective, including a 2400.07AG.075.0 e-chain, steel cable guide, harnessed bus cable, and five single cores of 6mm² each.

Safe energy and data transmission The igus® Chainflex® cable range offers a choice of over 850 different cables, available from stock. A main focus of the range are the data and bus cables. Solutions based on copper, glass or plastic fiber optic cables are provided for almost all bus systems in industrial use. We continue to provide you with all supply cables for your drive systems such as motor cables with and without brake/tacho cables and the matching feed cables. Ready assembled with plugs and sockets on request. Cost-reducing assembly The use of pre-assembled E-ChainSystems® enables expensive assembly hours at the place of installation to be considerably reduced. Functionally tested systems guarantee that plant components are soon put into operation. Assembly service We would be pleased to send you an offer for complete solutions, including all assembly services. You do not tie up your own resources and you have a trouble-free energy supply system for the future at a fixed price. LBT FLIZZ® - High speeds and accelerations Travel distances up to 120m, travel speed up to 8 m/s Suitable for moving or stationary controls, ideal for all bus systems When light weight is required When quiet, maintenance-free operation is required When rust-proof property is required At -10°C to +60°C constant temperature At accelerations over 10 m/s² Energy supply system for all media, not only electrical Also suitable for outdoor use (with reduced load data) Your benefit from LBT FLIZZ® Guaranteed service life Cost-effective compared with conventional energy supply systems Cable protected against dirt, rain, sun, ice, snow and leaves Insensitive to wind and motion Good resistance to chemicals, solvents, etc. Use of special cables possible, e.g. servo drive cables, fiber optic cables, bus systems etc. almost maintenance free Quick and easy installation due to delivery as a ready-assembled system Easy integration with existing plants Cable length 50% of the travel distance No central cable junction No effort required to maintain carriages Sewage treatment plant Longitudinal scrapers Sand traps Rain water overflow reservoir Galvanizing equipment Cranes Plant construction Space-saving and compact energy supply with LBT FLIZZ® - low maintenance system, delivered pre-fitted with ready-assembled igus® E-Chain Energy supply system protected from wind and weathering. The used materials are weather-resistant, as well as resistant against most chemicals, oils, fats, coolants and solvents Solid plastic with powder-coated support tubes Modular assembly: the system can be enclosed with intermediate panels! Can be delivered pre-fitted Variable fields, which are simply screwed on top of each other Glide rail integrated in the profile

#Description Taihan Fiberoptics co., ltd. refers to the technology and the medium associated with the transmission of data as light along a pure strand of glass, which is a thin as a human hair. With the increasing use of multimedia data and the advancement of wire and wireless services, the demand for optical fibers is increasing. Our lower bend loss optical fibre is best suited for your network enabling high network performance and significantly lower installation costs. We offer range of 250um and 200um Bend Insensitive Single Mode fibre and Non-Zero Dispersion Shifted Single Mode fibre (NZDSF) solutions suitable for 5G and FTTx applications. #Products - Low Loss optical fiber - Non Zero Dispersion Shifted optical fiber - Bending Insensitive optical fiber - Micro Diameter optical fiber - Multi mode optical fiber

The remote data transmission unit ARC1-Box-SB with logger function is equipped with safety barriers and, in combination with intrinsically safe transmitters, it is suitable for use in hazardous applications. The unit is encased in a robust, water-tight aluminium housing. It records measurements made by external sensors (e.g. a level sensor) and periodically transmits the collected data via 2G, 3G, 4G or LoRaWAN. The high-performance battery and sophisticated power management enable autonomous operation for up to 10 years. KELLER provides a range of licence-free software solutions for configuration and data processing. The easiest and most convenient way to access the collected data is via KOLIBRI Cloud.

The remote data transmission unit ARC1-Box with logger function is encased in a robust, water-tight aluminium housing. This unit records measurements made by external sensors (e.g. a level sensor) and periodically transmits the collected data via 2G, 3G, 4G or LoRaWAN. The high-performance battery and sophisticated power management enable autonomous operation for up to 10 years. KELLER provides a range of licence-free software solutions for configuration and data processing. The easiest and most convenient way to access the collected data is via KOLIBRI Cloud.

The remote data transmission unit ARC1-Tube with logger function is encased in a robust, stainless steel housing, which is ideally suited to installation in 2" monitoring pipes. This unit records measurements made by external sensors (e.g. a level sensor) and periodically transmits the collected data via 2G, 3G, 4G or LoRaWAN. The high-performance battery and sophisticated power management enable autonomous operation for up to 10 years. KELLER provides a range of licence-free software solutions for configuration and data processing. The easiest and most convenient way to access the collected data is via KOLIBRI Cloud.

The remote data transmission unit ADT1-Box is encased in a robust, water-tight plastic housing. The LoRa module, which can be configured on a country-specific basis, establishes a connection with the Internet and makes it possible to collect measurement data in a low-cost and energy-saving manner. These autonomous devices can be linked with digital level sensors and pressure transmitters in the KELLER D and X product lines. With three conventional, high-quality AA batteries, the system can operate autonomously for up to 5 years. The LoRaWAN provider can be selected freely or an in-house or open source infrastructure and associated services can be used. The easiest and most convenient way to access the collected data at the end of the transmission chain is via KOLIBRI Cloud from KELLER.

The remote data transmission unit ADT1-Tube is encased in a robust, stainless steel housing, which is ideally suited to installation in 2" monitoring pipes. The LoRa module, which can be configured on a country-specific basis, establishes a connection with the Internet and makes it possible to collect measurement data in a low-cost and energy-saving manner. These autonomous devices can be linked with digital level sensors and pressure transmitters in the KELLER D and X product lines. With three conventional, high-quality AA batteries, the system can operate autonomously for up to 5 years. The LoRaWAN provider can be selected freely or an in-house or open source infrastructure and associated services can be used. The easiest and most convenient way to access the collected data at the end of the transmission chain is via KOLIBRI Cloud from KELLER.

We assemble cables according to customer specifications for all kind of applications. In addition to common cable types, we also offer the production of customer-specific special cables, including the manufacture of customer-specific connectors. On the basis of your sample, your specification or technical drawing, we will create an individual offer and support you during the project. We advise you on the selection of suitable materials and offer cost reduction options. We offer you an active co-operation in the development and construction and give suggestions for improvement. For an offer we need: •technical drawing, sketch or pattern •technical specifications, equipment extras •required amount Please send following informations to: info@nh-technology.de One of our engineering experts will contact you asap

The Hoymiles Gateway DTU-WLite is a data transmission unit that uses 2.4G wireless communication to collect information and data from microinverters and transmits them to the Hoymiles surveillance system S-Miles Cloud via WiFi technology. The DTU is compatible with the Hoymiles HM and MI series.

Windows software for configuring KELLER IoT remote data transmission units such as GSM-2, ARC1 and ADT1.

Windows software for displaying measurement data from the remote data transmission units GSM-2 and ARC-1 and for saving this data in a database.

All-aluminum body, one object for multiple purposes, connecting multiple devices. The multi-ports expansion of USB C to 3* USB 3.0 ports and 4K HDMI port allow you to connect your hard drive, USB key, mouse, keyboard, TV, computer screen...ect, fast charging your devices and high speed for data transmission. USB-C PD 3.0 port deliver 100W for charging your laptop rapidly. Mirco SD and SD card reader, high speed for data transmission and card reading. Fast heat dissipation and stable performance.

Capacitive displacement sensors are designed for measurement tasks that require extremely high precision. The capaNCDT 6500 capacitive multi-channel system is ideally suited to reliable measurements down to sub-nanometre resolution. The controller offers a maximum response rate of 7.8kHz (digital, with up to four channels) or a frequency response of 8.5kHz. As well as an analogue output, an EtherCAT interface is also available. EtherCAT enables accurate data transmission in real time, with high speed integration into the existing measurement environment and synchronisation of two systems. Set up and configuration of the capaNCDT 6500 system are carried out easily using a web browser.

Oil-Mon Sensor diagnoses and monitors status of degradation, particle and water contamination of used oil in real time, which detects four factors by single sensor. Therefore, it is very important to find out root cause and take prompt action at early stage. Real-time monitoring of oil degradation and contamination with Oil-Mon Sensor can prevent catastrophic failures and extend the life of the equipment. ● Measure multiple items by one sensor (4 items) ● Can initialize and set maximum scale in the controller ● Easy to check visually the measuring values on the controller ● Alarm sounds when an alarm occurs ● Real-time data transmission by connecting to PC

Well connected: installing system electronics. Today’s machines are not just mechanical. They have sophisticated electric and electronic components, information technology and data transmission systems. This is why it goes without saying for us that we take the same care when reconnecting these elements as we do with the mechanical parts and components. Electrical and electronic installations are just as much a part of our services as the subsequent I/O checks. We also have specialists in programmable logic controllers (PLC technology). Relocations are often a good opportunity to equip older systems with the latest, more efficient electronic components and operator’s stations. You can always ask our engineers any questions you might have about the control system hardware and software programming. Our carefully planned solutions for digitalizing and networking production systems support our customers on their path toward Industry 4.0. The electronics and electrics in today’s...

Elevate your 5G infrastructure with our cutting-edge 3.1mm PEEK Radome, designed to meet the rigorous demands of high-frequency 5G applications. This advanced radome is crafted from Polyether Ether Ketone (PEEK), a material renowned for its exceptional durability, high-temperature resistance, and superior mechanical properties. Our 3.1mm PEEK Radome ensures optimal signal clarity and integrity, crucial for maintaining the performance and reliability of your 5G networks. The radome provides robust protection for sensitive antenna components, shielding them from environmental factors such as extreme weather conditions, UV radiation, and physical impacts. Its low dielectric constant and loss tangent make it ideal for preserving the strength and quality of high-frequency signals, ensuring seamless data transmission and reception.

The Flex 4K has the ability to record ultra slow motion 1000 frames per second at 4K resolution. It has a PL mount and a multitude of external accessories. The images it can record in ultra high speed is 938 FPS in 4K and 1977 frames per second in 2K. It has an excellent FPS range from 15 FPS up to 2949 FPS. It is also capable of recording audio thanks to the Mini-BOB adapter. This camera is only available for rent with the hiring of a specialized technician. It uses Vision Research's 1T and 2T Phantom CineMag IV memories, which allows it to capture a high amount of information per second, which entails advanced data transmission technology and a fairly high workflow. It has two recording formats up to 4K Cine Raw and in Apple Prores 422 HQ. It also offers the possibility of recording in a dual way while saving the two files at the same time.

Bridge thermostats are suitable for controlling the temperature of any bath. External systems can also be controlled using rotational speed controlled pressure-suction pumps with VPC technology. Models with a larger heat output are suitable for larger bath volumes. The telescopic arm can be pulled out to a length of a maximum of 884 millimetres. The new multi-touch controller Pilot ONE offers a brilliant 5.7" touchscreen with graphic functions and a comfortable navigation menu. All important operating parameters and temperature values are neatly displayed on the touchscreen. Thanks to the new favourites menu, the one-click operation and the integrated technical glossary the operation is very easy, just like on a smartphone. Integrated USB and Ethernet ports allows connection to a PC or network, e.g. for remote control or data transmission. Pilot ONE controller with Plug & Play technology Precise temperature control 5.7“ touchscreen and comfortable menu navigation Overtemperature.

Our products are unseen aides installed in many electric machines and motors: from huge plants to compact hand-held devices. Are you looking for a entirely specialised solution for current and data transmission? We produce the right carbon brushes and brush holders for the broad range of applications which characterises the field of electrical and plant engineering. This includes filling and packaging machinery, waste water treatment plants or revolving door systems, just as much as the manual electrical appliances which provide professional and hobby craft workers with reliable service. And these are a just a few examples. As we are system suppliers, you can be absolutely sure: MACK supports you throughout the entire development process. MACK supplies first-class OEM quality and durable replacement parts from in-house production. MACK makes your ideas come true!

Our small and industrial carbon brushes are used in many different power- and signal-transmission applications. How can we help you? The range of different dimensions and versions of small and industrial brushes is enormous: It's no wonder the quality products from MACK are used in many electrical tools, small motors, AC and DC motors, in the automotive field, and many other applications. With higher currents, such as in wind turbines and grounding systems, our metal graphite grades ensure optimum transmission. Our silver graphite carbon brushes are also used in marine shaft grounding and in signal- and data-transmission systems, for example, in tachogenerators. Do you want to make ordering small and industrial carbon brushes as fast and uncomplicated as possible? Then use our online MACK carbon brush configurator. With just a few clicks, your enquiry or order reaches us – and then is quickly sent on the way to you.

Bridge thermostats are suitable for controlling the temperature of any bath. External systems can also be controlled using rotational speed controlled pressure-suction pumps with VPC technology. Models with a larger heat output are suitable for larger bath volumes. The telescopic arm can be pulled out to a length of a maximum of 884 millimetres. The new multi-touch controller Pilot ONE offers a brilliant 5.7" touchscreen with graphic functions and a comfortable navigation menu. All important operating parameters and temperature values are neatly displayed on the touchscreen. Thanks to the new favourites menu, the one-click operation and the integrated technical glossary the operation is very easy, just like on a smartphone. Integrated USB and Ethernet ports allows connection to a PC or network, e.g. for remote control or data transmission. Pilot ONE controller with Plug & Play technology Precise temperature control 5.7“ touchscreen and comfortable menu navigation Overtemperature.

The recording of operating data such as flow volumes, pumping pressure, operating hours and power consumption of the pumps etc. is essential for the state monitoring of – usually municipal – pumping stations and pressure line as well as for the diagnosis of machine components. Data recording system with LCD display for the electronic acquisition, display, recording, evaluation, remote transmission and archiving of up to 6 analogue and digital input signals. Product features For daily, monthly, annual evaluation; meter statuses, operating times and volumes; min., max. and mean value recording Multi-colour display, digital, bar chart and graph representation Archiving in the internal memory and on compact flash card (no data lost in the event of a power failure!) Remote data transmission via standardised interfaces Suitable for door installation in the AWAcontrol control cabinet

The aspects of data acquisition, tracing and data processing also play an increasingly important role in industrial plants. In the age of Industrie 4.0, we have been offering "big data" for years. In our plants and systems, we use database systems that perform several tasks simultaneously. Modern databases, such as MS SQL or Oracle, offer flexible interfaces which supply the plant with order data from the ERP system and enable the transmission of consumption data from the plant to the ERP system. IFA Technology has developed the GraviSoft software for archiving and recording data and errors in an SQL database. In addition to the usual features, the GraviSoft 3.0 version also offers new, future-oriented highlights, for instance