Data logger systems - Import export

The Datapaq Furnace Tracker Specialty Profiling Systems from Fluke Process Instruments features the Datapaq TP6 and Datapaq DP5 data loggers, hundreds of application specific thermal barriers, thermocouples and our intuitive Datapaq Insight™ Software to create a complete solution. These specialty systems enable through-process temperature profiles to be obtained in processes where long trailing thermocouples are not an option. Each thermal barrier is designed with a specific application in mind to provide the optimum solution for your process. If our current offerings of specialty systems do not meet your requirements, the engineering team at Fluke Process Instruments will design a custom thermal profiling solution. For more information, visit our customized profiling systems page. Data loggers The Datapaq TP6 is the perfect solution for the most demanding high-temperature profiling applications with a 316-grade machined stainless-steel case and IP67 rating. Once combined

The DATAPAQ EasyTrack3 thermal profiling system is the third generation of the globally accepted EasyTrack brand successfully used by powder and paint coating applicators and suppliers. The DATAPAQ ET3 datalogger guarantees accurate temperature profiling and is designed with the easy two-button operation. Improved logger memory of x3 permits the profile detail your coating process demands (0.5 s sample interval = 2.5 hours run). A battery life is improved x2.5 over previous gen. Performing safely in up to 85 °C/185 °F, the plastic cool-touch case allows safe and comfortable handling even after the most demanding runs. Supplied with onboard calibration certificate, the logger provides complete traceability to comply with QA standards. • Improved logger design with more memory, battery life and onboard intelligence • New EasyTrack Insight Professional Software option with more operation, analysis & reporting power • New capabilities with multiple runs & SmartPaq PASS/FAIL indicator

DATAPAQ temperature profiling systems comprise data loggers, thermocouples, thermal barriers, and analysis software. The DATAPAQ TP3 logger is used with DATAPAQ Furnace Tracker, DATAPAQ Kiln Tracker, and DATAPAQ Oven Tracker systems. Features: 10 or 20 thermocouple channels Reset/download via Bluetooth with short range telemetry capability (up to 5 meters) High accuracy: ±0.3 °C (±0.5 °F) Onboard memory service log for remote diagnostic and rapid on-site service Standard USB data cable available in local markets Radio frequency (RF) telemetry or hardwired data acquisition for monitoring in real time Three user-replaceable battery types for operation in normal and high ambient temperatures ‘Multiple events’ allows variable sampling intervals during a run – ideal for water and gas quench processes Multiple run capability allows storing up to 10 runs before downloading into separate .paq files Sampling intervals down to 0.1 seconds to collect maximum data

eSight is a comprehensive and intuitive software package offering professional methods for the management of energy-related data. eSight is fully web based making it available online. The software can also be installed to a client. Data can be automatically imported from data loggers, BMS and SCADA systems, production systems, electronic billing and spreadsheets. Interfaces for system integration with the most important system manufacturers making integration of existing systems very easy.

The Lascar EL-USB-2 Temperature and Humidity Meter accurately record an environment's temperature and humidity. Using the latest technology, the data logger stores more than 16,000 temperature and humidity readings between -35°C and 80°C and 0 to 100%RH.

The DCX-22AA-CTD data loggers measure conductivity and temperature as well as pressure, along with the depth of bodies of water. They compensate for the air pressure using an additional, water-tight absolute pressure sensor with a stainless steel separating diaphragm. Unlike gauge pressure systems with a capillary tube, this system is completely resistant to moisture and can therefore be immersed. Thanks to their long-life battery, they can keep recording measurement results for years (up to 10 years at a rate of one measurement per hour). The logger can be configured using the supplied software (measurement interval, incident management, delayed measurement start etc.) and data that has been read can be displayed in a graph or chart, corrected using air pressure values, converted into fill levels or other units, and exported.

The DCX-22-CTD data loggers measure conductivity and temperature as well as pressure, along with the depth of bodies of water. The integrated Pt1000 achieves an accuracy of ±0,1 °C, and the conductivity can be measured at ± 2,5% of the selected range (0,2 / 2 / 20 / 200 mS/cm). Thanks to their long-life battery, they can keep recording measurement results for years (up to 10 years at a rate of one measurement per hour). The logger can be configured using the supplied software (measurement interval, incident management, delayed measurement start etc.) and data that has been read can be displayed in a graph or chart, corrected using air pressure values, converted into fill levels or other units, and exported.

for guiding welder during weld process and recording welding data also printout of data to excel file and thermal printer included

The iPCX data logger speaks many of the common and standardised data protocols and field buses. Measurements concerning electricity, gas, water, heat etc. can be easily connected as well as operating and production data of all kinds. At least 1000 running measurements from widely spread sensors, counters, automation stations etc. can be monitored in a parallel manner - via a 2-wire fieldbus, wirelessly or via network. Measured values are bundled and transmitted in real time to a shared and freely adjustable platform. Our security architecture for data transfer always receives top marks from the IT executives of large-scale customers. The iPCX is a compact, powerful all-rounder that can be used flexibly and is easy to operate with modern HTML configuration interfaces - despite its extensive functionality. The hardware basis is a robust, fanless industrial PC based on Linux with large data memory.

The iNOEX Data Manager (iDM) comprises a central data logger for the collection of all process and quality data of the iNOEX systems in the extrusion line. Optimization potentials can be identified, and product-specific key figures can be analyzed and evaluated. The software is installed as a virtual machine in the customer's network, so that no additional hardware is required. OPC-UA as a standardized process data interface, integrated with the latest measurement, control and automation solutions from iNOEX, transfers the data. A connection of legacy systems via the iDM gateway is also possible. By using the Grafana software, iDM 4.0 allows graphs, visualizations and data analysis, data export as .csv or .xls, live data on the database server, use as a hall monitor, as well as ready-made and freely configurable dashboards and reports for each connected system.