Results for
MEETOPTICS
Spain
Continuous-wave lasers emit coherent light with constant power either in single-frequency operation or in multiple modes.
Request for a quoteVIRMER
Netherlands
Chiller CW-5300 is suitable for working with CO2 laser tubes up to 180W. Such cooling systems keep the rated power of the laser as long as possible.
Request for a quoteVIRMER
Netherlands
JPT Opto Electronics is a manufacturer of laser equipment. The company was founded in 2006 and specializes in investigation, development, production and sales of laser equipment and related products. The company owns a number of patents and intellectual property rights and produces several types of fiber lasers: continuous wave lasers, quasi-cw, lasers for scientific proposes, variable-wavelength lasers, fiber amplifiers, ASE emission units, etc. These products are widely used in the fields of laser marking and engraving, 3D printing, DTS systems and scientific research. The company has fully implemented the ISO 9001 quality management system and EPR system, and provides comprehensive pre-sales and after-sales services for all customers.
Request for a quoteVIRMER
Netherlands
JPT Opto Electronics is a manufacturer of laser equipment. The company was founded in 2006 and specializes in investigation, development, production and sales of laser equipment and related products. The company owns a number of patents and intellectual property rights and produces several types of fiber lasers: continuous wave lasers, quasi-cw, lasers for scientific proposes, variable-wavelength lasers, fiber amplifiers, ASE emission units, etc. These products are widely used in the fields of laser marking and engraving, 3D printing, DTS systems and scientific research. The company has fully implemented the ISO 9001 quality management system and EPR system, and provides comprehensive pre-sales and after-sales services for all customers.
Request for a quoteVIRMER
Netherlands
JPT Opto Electronics is a manufacturer of laser equipment. The company was founded in 2006 and specializes in investigation, development, production and sales of laser equipment and related products. The company owns a number of patents and intellectual property rights and produces several types of fiber lasers: continuous wave lasers, quasi-cw, lasers for scientific proposes, variable-wavelength lasers, fiber amplifiers, ASE emission units, etc. These products are widely used in the fields of laser marking and engraving, 3D printing, DTS systems and scientific research. The company has fully implemented the ISO 9001 quality management system and EPR system, and provides comprehensive pre-sales and after-sales services for all customers.
Request for a quoteCRYLAS CRYSTAL LASER SYSTEMS GMBH
Germany
The DPSS-CW-DUV laser FQCW266-1000 delivers an output power of 1000 mW in single-mode operation at a wavelength of 266 nm. Other models in the high-power series are available with optical output powers of from 300 mW up to 1 W. Compared to the 266 nm CW lasers from other manufacturers, the FQCW266 systems are characterized by a long coherence length of more than 1000 m, a narrow line width of < 300 kHz, and a sealed design that ensures reliable operation without the need for subsequent adjustments of the internal optics. Due to the sealed housing, the lasers require very little maintenance and are particularly suitable for industrial 24/7 operation. The central wavelength is in the range of 266.02 nm and 266.07 nm (in air). The output power can be adjusted from 10 mW to 1 W. The power consumption of the laser is less than 450 W. The laser comes with a software for control of the main functions by a PC.
Request for a quoteCRYLAS CRYSTAL LASER SYSTEMS GMBH
Germany
The DPSS-CW-DUV laser FQCW266-200 delivers an output power of 200 mW in single-mode operation at a wavelength of 266 nm. Other models in the low-power series are available with optical output powers from 10 mW to 200 mW. Compared to the 266 nm CW lasers from other manufacturers, the FQCW266 systems are characterized by a long coherence length of more than 1000 m, a narrow line width of < 300 kHz, and a sealed design that ensures reliable operation without the need for subsequent adjustments of the internal optics. Due to the sealed housing, the lasers require very little maintenance and are particularly suitable for industrial 24/7 operation. The central wavelength is in the range of 266.02 nm and 266.07 nm (in air). The output power can be adjusted from 20 mW to 220 mW in 2 mW increments. The power consumption of the laser is less than 160 W. The laser comes with a software for control of the main functions by a PC.
Request for a quoteCRYLAS CRYSTAL LASER SYSTEMS GMBH
Germany
The DPSS-CW-DUV laser FQCW266-500 delivers an output power of 500 mW in single-mode operation at a wavelength of 266 nm. Other models in the high-power series are available with optical output powers of up to 1 W. Compared to the 266 nm CW lasers from other manufacturers, the FQCW266 systems are characterized by a long coherence length of more than 1000 m, a narrow line width of < 300 kHz, and a sealed design that ensures reliable operation without the need for subsequent adjustments of the internal optics. Due to the sealed housing, the lasers require very little maintenance and are particularly suitable for industrial 24/7 operation. The central wavelength is in the range of 266.02 nm and 266.07 nm (in air). The output power can be adjusted from 5 mW to 500 mW. The power consumption of the laser is less than 450 W. The laser comes with a software for control of the main functions by a PC.
Request for a quoteCRYLAS CRYSTAL LASER SYSTEMS GMBH
Germany
The DPSS-CW-DUV laser FQCW266-100 delivers an output power of 100 mW in single-mode operation at a wavelength of 266 nm. Other models in the low-power series are available with optical output powers of up to 200 mW. Compared to the 266 nm CW lasers from other manufacturers, the FQCW266 systems are characterized by a long coherence length of more than 1000 m, a narrow line width of < 300 kHz, and a sealed design that ensures reliable operation without the need for subsequent adjustments of the internal optics. Due to the sealed housing, the lasers require very little maintenance and are particularly suitable for industrial 24/7 operation. The central wavelength is in the range of 266.02 nm and 266.07 nm (in air). The output power can be adjusted from 10 mW to 110 mW in 1 mW increments. The power consumption of the laser is less than 160 W. The laser comes with a software for control of the main functions by a PC.
Request for a quoteCRYLAS CRYSTAL LASER SYSTEMS GMBH
Germany
The DPSS-CW-DUV laser FQCW266-300 delivers an output power of 300 mW in single-mode operation at a wavelength of 266 nm. Other models in the high-power series are available with optical output powers of up to 1 W. Compared to the 266 nm CW lasers from other manufacturers, the FQCW266 systems are characterized by a long coherence length of more than 1000 m, a narrow line width of < 300 kHz, and a sealed design that ensures reliable operation without the need for subsequent adjustments of the internal optics. Due to the sealed housing, the lasers require very little maintenance and are particularly suitable for industrial 24/7 operation. The central wavelength is in the range of 266.02 nm and 266.07 nm (in air). The output power can be adjusted from 30 mW to 300 mW. The power consumption of the laser is less than 450 W. The laser comes with a software for control of the main functions by a PC.
Request for a quoteCRYLAS CRYSTAL LASER SYSTEMS GMBH
Germany
The DPSS-CW-DUV laser FQCW266-50 delivers an output power of 50 mW in single-mode operation at a wavelength of 266 nm. Other models in the low-power series are available with optical output powers of up to 200 mW. Compared to the 266 nm CW lasers from other manufacturers, the FQCW266 systems are characterized by a long coherence length of more than 1000 m, a narrow line width of < 300 kHz, and a sealed design that ensures reliable operation without the need for subsequent adjustments of the internal optics. Due to the sealed housing, the lasers require very little maintenance and are particularly suitable for industrial 24/7 operation. The central wavelength is in the range of 266.02 nm and 266.07 nm (in air). The output power can be adjusted from 5 mW to 55 mW in 0.5 mW increments. The power consumption of the laser is less than 160 W. The laser comes with a software for control of the main functions by a PC.
Request for a quoteCRYLAS CRYSTAL LASER SYSTEMS GMBH
Germany
The DPSS-CW-DUV laser FQCW266-10 delivers an output power of 10 mW in single-mode operation at a wavelength of 266 nm. Other models in the low-power series are available with optical output powers of up to 200 mW. Compared to the 266 nm CW lasers from other manufacturers, the FQCW266 systems are characterized by a long coherence length of more than 1000 m, a narrow line width of < 300 kHz, and a sealed design that ensures reliable operation without the need for subsequent adjustments of the internal optics. Due to the sealed housing, the lasers require very little maintenance and are particularly suitable for industrial 24/7 operation. The central wavelength is in the range of 266.02 nm and 266.07 nm (in air). The output power can be adjusted from 2 mW to 12 mW in 0.1 mW increments. The power consumption of the laser is less than 160 W. The laser comes with a software for control of the main functions by a PC.
Request for a quoteCRYLAS CRYSTAL LASER SYSTEMS GMBH
Germany
The DPSS-CW-DUV laser FQCW266-25 delivers an output power of 25 mW in single-mode operation at a wavelength of 266 nm. Other models in the low-power series are available with optical output powers of up to 200 mW. Compared to the 266 nm CW lasers from other manufacturers, the FQCW266 systems are characterized by a long coherence length of more than 1000 m, a narrow line width of < 300 kHz, and a sealed design that ensures reliable operation without the need for subsequent adjustments of the internal optics. Due to the sealed housing, the lasers require very little maintenance and are particularly suitable for industrial 24/7 operation. The central wavelength is in the range of 266.02 nm and 266.07 nm (in air). The output power can be adjusted from 3 mW to 30 mW in 0.3 mW increments. The power consumption of the laser is less than 160 W. The laser comes with a software for control of the main functions by a PC.
Request for a quoteTOPTICA PHOTONICS AG
Germany
The TopWave 266 sets new standards with respect to low-noise operation. The narrow linewidth laser emission typically shows < 0.1% RMS, hence the user benefits from an improved signal-to-noise ratio during measurements. Designed for easy integration the TopWave 266 is a turnkey system which the user can control either via a touch panel at the control unit or using the USB/Ethernet interface in combination with a PC GUI. Due to its high wall-plug efficiency the system can be operated with conduction cooling only. In case no proper heatsinking is possible, a closed loop chiller option is available. The TopWave 266 is ideal for sophisticated measurement and production tasks in e.g. semicon inspection, lithography or Raman spectroscopy. It is a cost-effective and reliable laser that enables the user to concentrate on their application rather than worrying about the light source.
Request for a quoteTOPTICA PHOTONICS AG
Germany
Each TeraBeam system comprises two distributed feedback (DFB) lasers with built-in optical isolators and fiber-optic beam combination. Available at 780 nm and 1.5 µm, the TeraBeam matches the excitation wavelengths of GaAs and InGaAs terahertz emitters, respectively. TOPTICA carefully selects the laser diodes with respect to their thermal tuning range. The DLC Smart controls the temperatures of both lasers with unmatched precision.
Request for a quoteTOPTICA PHOTONICS AG
Germany
The FPI 100 is a confocal, scanning Fabry-Perot interferometer with a built-in photodetector unit, designed for measuring and controlling the mode profiles of continuous wave (cw) lasers. The FPI is available with different mirror sets and photodetectors for wavelength ranges between 330 nm and 3000 nm. The standard mirror reflectivity is 99.8 %, corresponding to a typical finesse of > 400, resolving even narrow laser lines.
Request for a quoteTOPTICA PHOTONICS AG
Germany
TOPTICA's beat detection consists of two flexible modules: DFC BC and DFC MD. Separating beam combination and beat detection into two units allows for placing them at different locations. The DFC BC and DFC MD units are specifically designed for a combination of the DFC with TOPTICA's DL pro tunable diode laser series, but can also be used with other cw lasers.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
TOPTICA PHOTONICS AG
Germany
Various extension modules are available that convert the offset-free fundamental output of the DFC CORE from 1560 nm to any desired wavelength between 420 nm and 2200 nm. The wavelength conversion in these modules is achieved with the well-established technology of TOPTICA’s ultrafast fiber lasers. All extension modules use highly stable all-fiber amplification, nonlinear conversion and compression. The output power of all extension modules allows for phase-locking of cw lasers. Special wavelength extensions are available on request or included in TOPTICA's complete stabilized laser systems.
Request for a quoteTOPTICA PHOTONICS AG
Germany
TOPTICA’s frequency comb product line uses our proprietary CERO-technology which is based on Difference Frequency Generation (DFG). It is inherently fCEO-stable and combines high robustness, high-end performance and a convenient user-interface in a compact format. Frequency combs are used to measure absolute optical frequencies and to stabilize cw-lasers to specific frequencies, for example in order to drive transitions in cold atomic samples. Stabilization of Tunable Diode Lasers to a frequency comb is a reliable way forward to deal with the rising complexity of optical quantum technology applications.
Request for a quoteTOPTICA PHOTONICS AG
Germany
The wavelength meters of the WS series accomplish wavelength measurements with highest accuracy. Both cw and pulsed lasers with narrow-band emission can be examined, monitored and even actively controlled. Various models of the WS series are available, covering UV to IR wavelength ranges (192 nm - 11 µm). Based on a rugged Fizeau interferometer setup without any moving components, the wavelength meters provide quasi unlimited lifetime.The spectrum analyzers LSA and HDSA allow for multi-line or broadband spectrum of light sources like cw and pulsed lasers, gas discharge lamps, super luminescence diodes, semiconductor laser diodes and LEDs.
Request for a quoteResults for
Cw lasers - Import exportNumber of results
21 ProductsCountries
Company type