Customised solutions - Import export

1, 2 and 3 Cartesian axis linear modules with rack and pinion drive guarantee precise manipulation of loads from 10 up to 2000 kg with fast and silent functioning. Our main application fields are: robotics, palletization, production line, logistics and manufacturing machines with Cartesian axis movements. Our products stand out for their: easy and quick assembly; high quality and competitive performances; reduced and simplified maintenance; wide range of integrated solutions; possibility of customised solutions; constant technical support and CAD drawings available. Strong points include: hardened sloping tooth racks (ground on request); payloads from 10 to 2000 Kg; up to 12-m beams (longer lengths can be obtained with jointed versions), high level torsional rigidity, precise shape; precise machining of all profiles (on request: repeatability up to +/-0.05mm); hardened and ground steel guide rails, for rollers and ball slides with cage; easy installation of pre-assembled systems...

- Low-maintenance system for travel up to 100 m - Other sizes and versions available, travel up to 200 m and more with E2 roller e-chains® - Protection against weather and dirt exposure - Cost-effective and fully enclosed complete solution - Standardized and modular design - Simple wall assembly or optional floor mounting - Cable lengths up to 50% shorter than festooning, low-profile installation and no cable junction - Cables are at all times guided with a defined bending radius, and tensile forces are absorbed by the e-chain® - Cables cannot hook, jam, or tear - No slip ring contacts (as is the case on motor drums) -Cables or hoses can easily be retrofitted at any time Reduce electricity costs - direct drive due to scraper, no additional drives needed (as is the case on motor drums) Scraper arm (e.g. as mechanical connection to the scraper carriage) optionally available - we document the situation on-site and will propose a customised solution

Transmec Group has been specialising in shipments, transport and logistics since 1850. Over the years, we have used our knowledge and expertise to deliver customised solutions that not only meet, but exceed the specific needs of our customers.

For manufacturers and operators of rails and utility/commercial vehicles, LAWECO designs customised solutions for assembly work, e.g. for the installation and removal of drive units.

we carry a large selection of different PET films (Polyethylene Terephthalate) from leading manufacturers and can offer customised solutions for just about any application.

What you can expect from an APROVIS process gas heat exchanger: - Suitable for low and high temperature ranges - Operating pressures up to 160 bar - Compact design for use in confined spaces - Suitable for a wide range of gases - Implementation of customised solutions

Formwork for piers and bridge girders plays a crucial role in the construction industry, especially in the realisation of bridges and other large concrete structures. With customised solutions, complex architectural designs can be realised while ensuring structural integrity and safety. Customised formwork systems for bridge piers offer numerous advantages for construction professionals. Not only do they allow precise customisation to the specific requirements of each project, but they also enable efficient and time-saving construction.

Some 3,000 different types of brushes in our off-the-shelf store are just waiting to go into action. And if the right one is not amongst them, we will design a customised solution to help out in an emergency. You have a problem, we solve it – that’s the deal. Whether in the course of regular machine maintenance or an unexpected repair job: We can supply a broad range of replacement parts within 24 hours, starting with single parts. Because we have decades of experience in stocking carbon brushes. For special individual productions, we coordinate with you using photographs or construction drawings, then make samples of your requirements, produce the required tooling, and move quickly into production and assembly. Carbon brushes and brush holders from a single provider. And if you like it easy, then our Carbon brush configurator can ‘advise’ you. Using the online tool you can easily make enquiries about or order typical small and industrial carbon brushes directly.

Discharging, feeding, conveying AViTEQ reversing conveyors are used wherever bulk solids have to be conveyed and metered in an opposing direction. They are executed as reversing conveyor troughs or pipes. AViTEQ reversing conveyors are used primarily in the food and chemicals industries. Customised solutions, however, can also be realised for the recycling and raw materials industry.The technology used in the magnetic vibrator enables precise metering and exhibits no disruptive start-up or discharge behaviour. Advantages & Benefits mechanical flap and deflection systems eliminated (e.g. Y-fitting) considerably reduced installation height and hence cost saving through lower building costs reversing conveyors also act as shut-off devices the use of magnetic vibrators creates certain benefits (controllability, metering accuracy, no wearing parts etc.) reversing conveyors are available in ATEX design Construction The main components are: reversing conveyors from various materials (e

Offer our expertise in the design of energy storage products and systems to meet your expectations in terms of : functionality, lead times, cost, manufacturing, safety and durability - that's our mission. For your on-board energy storage system, FORKLIFT ENERGIE, a DC specialist, will work with you to develop advanced, customised solutions based on your technical requirements and needs. Our energy storage design office puts all its industrial know-how at your service to help you build this equipment, whether it's an agricultural robot, an innovative tool for the construction industry or an AGV for the aerospace industry. Our industrial experience and our sensitivity to technological and financial choices ensure that you end up with reliable, functional and durable equipment that is perfectly suited to its users.

Maximum lifecycle for demanding applications In addition to modern NiCd batteries GW Batterie GmbH also provides conventional stationary lead batteries. Not only do we supply conventional batteries, our primary focus is on providing customised battery solutions including the appropriate accessories. An overview of our stationary lead batteries: Lead Batteries Sealed, Closed Types Sealed: AGM, Gel Closed: OGI, OPZS, GroE Design 2 V, 6 V and 12 V Single cell and block batteries Capacity 0.8 Ah - 3500 Ah Application Back-up power supply units for power stations Telecommunications UPS systems Signalling systems Safety lighting

Thanks to decades of experience and innovation, the Tyrolit range includes drill bits, including TGD® technology diamond wet drill bits, which fulfil almost all construction requirements. Especially in combination with Tyrolit drill motors, they offer reliable and clean results. Tyrolit fulfils the expectations of construction professionals with durable wet core bits for precise core drilling in various dimensions. — For reinforced concrete, steel, masonry, brick, sand-lime brick, fireclay brick, asphalt and special applications — Holders and connection threads in accordance with local standards for all motor types — Perfect system solutions with Tyrolit drill motors and drill rigs — Special dimensions and customised solutions on request Tyrolit offers vacuum-brazed diamond tile drills for wet and dry drilling (with paraffin), which enable precise drilling without edge chipping in tiles, porcelain stoneware and marble slabs.

Generally speaking, guide rollers come in two different varieties: guide wheels and running wheels. Guide wheels are used in machines or gates to facilitate linear motion. These wheels are usually put under frequent but brief loads. Running wheels, on the other hand, are designed to withstand constant and consistent loads. They are frequently used in conveyor systems. Blickle provides a total of seven different product series with different polyurethane and nylon treads and steel or nylon wheel centres to suit a wide variety of applications and requirements. We are also an excellent partner if you need an individual customised solution. Please contact your personal adviser to find out more!

Based on proven coil anodizing technology from our B57S® product, B73A can be used for shelving, furniture, medical and domestic appliances and many other applications. The surface of Novelis B73A is industrially pre-treated and coil anodised in a continuous process. This ensures a consistent high quality and is therefore the most cost-effective solution for the customer. B73A offers customised solutions with different functional and decorative requirements for the electronic, domestic appliances and chemical industries*. Our delivery program offers a wide product range, including a variety of colours and standard coating thicknesses. Standards are available in 1 ton lots on a short delivery time. *Please note: Due to the hardness of the anodic film, crazing can occur during extreme bending or forming. To minimise the effect more information is available on request.

With the EASYPRO CS, you get a configurable system. This customised solution is ideal for industrial applications and saves costs as only the required components are installed. The design of the base plate allows the CS120 to be used in combination with up to three other measured variables in the water. The integrated TOPAX® MC multi-channel controller continuously measures the water parameters and keeps them within the target range. It controls a large number of actuators and final control elements and is simple and intuitive to operate. Components of the EASYPRO CS (mounted on base plate): . Multi-channel controller TOPAX® MC . Measuring cells and measuring cell fittings . Sample water filter . Flow monitor . DFR 45 flow controller with temperature sensor and sample water tapping point . Inlet and outlet tap . Holder for buffer solutions and buffer solutions for adjusting the measuring cells . Multicoloured LEDs

CONTAINER AND SYSTEM SOLUTIONS FOR THE INTERMEDIATE STORAGE OF HEAT FROM WASTE HEAT OR RENEWABLE ENERGIES The intermediate storage of heat from biogas plants, biomass cogeneration plants or other heat sources is an important prerequisite for effective use. Lipp buffer tank systems are economic system solutions for the storage and supply of thermal energy and can be easily integrated into customised solutions for local heat supply. LIPP BUFFER STORAGE TANKS The individually tailored solution appropriate to heat storage requirements with useful volumes of 80 to 3,000 m³ is made of stainless steel with the Lipp dual seam system and operated in conjunction with insulation adjusted to the application at about 95 ° C. Since the Lipp system is unpressurised, the container solutions are extremely low maintenance and are very durable. The high volume, above ground Lipp storage tanks have been specially developed for this application and are popular with end users and energy suppliers alike.

TANK AND SYSTEM SOLUTIONS FOR WASTE WATER TREATMENT PLANTS Individual, customised container and system solutions have been one of the core business areas of Lipp GmbH for decades. This is demonstrated by the long list of references for completed tanks and equipment that have been implemented in close cooperation with well known engineering firms and companies for industrial waste water treatment plants at home and abroad. From simple, open topped waste water tanks through process vessels with special requirements for stainless steel and sealing materials to fully equipped fermenter types, (SBR, CSTR etc.) for different applications, Lipp offers a wide range of system solutions. Each project is planned and manufactured individually according to specific customer requirements for material, diameter, process instructions etc., and installed and tested if necessary in close cooperation with the partners. The versatility of the Lipp system in combination with process

FLEXIBILITY FOR THE METAL PROCESSING INDUSTRY The demands on your production are continually increasing. As a solution provider, we therefore focus entirely on your needs. Continually providing increased efficiency, reliability and quality: we know what today’s metal processing industry requires from you – with our new, flexible ELEMENT platform we are already setting the course for a successful future today. Apart from the high level of productivity and precision you have come to expect from us, this solution offers customised configuration options and updates, enabling you to respond to future requirements. This gives you a real competitive edge – helping you to stay ahead in the long run.

The Planetary Gearbox for Power and Precision Full power with the highest levels of precision. The PlanetGear has the necessary power reserves available for the most challenging power transmission requirements. Advantages: compact design high level of efficiency high torsional rigidity low mass moment of inertia torque high overload capacity high dynamics large transmission ratios MS-Graessner offers innovative, customised gearbox solutions in a helical or straight-toothed design. The design of the toothing is carried out using KISSsoft and our own design and calculation programs. In addition to the provision of technical support and advice to our customers, we also take over the entire engineering process. By working closely together with our customers, we guarantee the development and production of the optimum drive solution in each case.

Our fastening machines can be adapted or constructed to customer requirements. Benefits / Characteristics • (Special shapes for customer products. E.g. oblique section cases, round cases, attaching to solid wood, etc…) • Highly automated solutions • Disability adapted machines • Fastening solutions for fittings of all types e.g. picture frames, jewellery hooklets etc…

We offer our KIS cylindrical roller bearings in various designs and sizes. In addition to the number of roller rows and the design of the cage, the flanges on the inner and outer rings are also considered. Due to their low friction and high rigidity, our cylindrical roller bearings are the perfect, durable solution for applications with high radial loads. They can also compensate for axial displacements (e.g. due to thermal expansion) and are available in sealed designs. Sealed cylindrical roller bearings are protected from dirt, water and dust. The seal prevents the ingress of contaminants and keeps the lubricant in the bearing. Together with you, we will be happy to develop a customised KIS solution for your requirements.

KAMAT's own filter technology is innovative and fast-growing. Why are we involved in filter technology? The answer is simple: high pressure cleaning technology using water as an environmentally friendly medium requires a high quality filter and recycling solution. In some cases, traditional filter manufacturers are unable to meet these requirements, which is why KAMAT also offers its own customer-specific solutions in the field of filter technology. High-pressure water cleaning technology has many advantages: A water jet can be used gently on the surfaces to be cleaned, water is generally available as a medium and at the same time is environmentally friendly without extensive delivery costs. When it comes to accessories, high pressure cleaning systems have special requirements that are difficult to meet. For this reason, KAMAT has developed its own customised high-pressure filter solutions. KAMAT high pressure filters are available for operating pressures up to 4,000 bar.

Our yoke type track rollers are available as single or double row needle roller or cylindrical roller bearings. Depending on the application requirements, the KIS range offers different ready-to-fit variants. Equipped with particularly thick-walled outer rings, our yoke type track rollers can support high radial loads and tolerate axial loads from minor misalignments, skewed running or short-term start-up shocks. Yoke type track rollers are mounted on axles and supported on a flat raceway (mating track). To meet specific requirements, we offer a wide range of different variants. Together with you, we develop the customised KIS solution carefully considering the use of cages, rib rings, seals and the profile of the outer ring running surface.

Customised system or individual part solutions are our core competence at KIS. We develop complete solutions for you based on our own KIS products and combine them with our comprehensive service for drive technology. Whether it's a careful selection of individual components or proper assembly ensuring your application functions perfectly: As bearing specialists based in Germany, we’re there for every step of the process, from development and construction, through monitoring of production and assembly, to quality inspections and practical tests.

The wind energy industry requires precise lifting solutions in many different situations, during production, transport, and construction. All parts of the windmill need handling at one point. The parts have considerable dimensions and must be lifted with care to avoid damage. We offer unique lifting solutions that are an excellent fit for the wind energy industry. All our lifting solutions are unique and designed for a specific situation. Our equipment is used to lift the steel plates of the windmill tower, to lift and turn the spare cabs of the windmill blades, to laminate the windmill blades, to demould prefabricated blades and to lift the long windmill blades itself. Effortless and precise lifting by vacuum handling Aerolift is known worldwide for its customised (vacuum) lifting solutions. Most of our lifting solutions are based on vacuum lifting technology due to many advantages compared to other lifting methods.

Handling tunnel segments by vacuum technology. Aerolift designs customised lifting solutions for the complete handling process of precast tunnel segments. The lifting solutions are used during production, transhipment and in the tunnel boring machine (TBM). The unique features of vacuum handling are highly suitable to handle concrete products, such as tunnel segments. Why choose vacuum handling Specially for concrete products, vacuum offers many interesting advantages compared to other lifting methods: Demoulding after 8 to 10 hours Demoulding, lifting, and turning by one lifting device Efficient during handling and the use of storage space No damage or deformation to the tunnel segment Less chance of cracks in the concrete Easy and fast handling Reuse of the same mould Reduced chance of accidents, because no one has to be near the load before, during or after handling Very safe due to the high safety standards of vacuum handling Handling tunnel segments during production

The GEMÜ C50 iComLine ultra pure 2/2-way plastic diaphragm globe valve has a pneumatic actuator. All medium wetted parts are made of PTFE. The external operator parts are made of PVDF. An integral optical position indicator is standard. In addition to 2/2-way valve bodies customised multi-port valve block solutions can be produced. —Low space requirement due to compact design —Ideally suited for corrosive media —High purity due to cleanroom manufacturing —Manifolds are a space-saving design solution

Are you looking for a quality, madetomeasure head protection helmet? This is the solution for you. The UBIO CAP head protection helmet is individually adjusted to the user due to our customised production. Thanks to the technology we have used in its manufacture, we offer the best customised solution. The materials we use in the manufacture of the helmet provide lightness and impact absorption to the user. We protect the frontal and occipital area of the skull to a greater extent due to the greater risk of impacts in this area. Technical characteristics Adjustable to the shape of the head Available colours black and navy blue Double shock absorbing protection due to the materials used in its manufacture Polyethylene foam and EVA. Thickness of protection In the front and occipital area there is a thickness of about 4 cm (3 cm of polyethylene foam +1 cm of EVA material). In the side area there is a thickness of 2 cm (1 cm of polyethylene foam +1 cm of EVA).

Standard or customised software solutions, specially developed for the food industry: programming weighing equipment, retail management, warehouse and production management, delivery notes and invoicing, graphic design of labels and receipts, and applications for integration with your own company’s production software.