Coupled aluminium - Import export

Base and rotary table aluminium alloy. Hollow shaft stainless steel. Preloaded worm gear steel. Claw coupling aluminium with polyurethane coupling spider. Version Aluminium alloy anodised. Note for ordering The unit is supplied with the position of cable outlet or control unit as shown in the drawing. Note Rotary positioning stages for motorised adjustment and positioning tasks. The preloaded worm gear runs virtually playfree. The bearing of the worm shaft offers maximum radial rotational accuracy. Cables can be routed through the large bore in the hollow shaft. The adjustable positioning ring is used to determine the rotational reference point to the position of the assembled part. Proximity switches can be mounted with the optionally available sensor holder (21094). The suitable programming software and interface cable for the stepper motor with positioning control are available as accessories (2500015).

Zero backlash, torsionally rigid, resiliently flexible and maintenancefree full metal coupling for transmitting angle synchronous rotary movement. The innovative slit structure makes possible a very good axial, radial and angular flexibility with low reset force. Ideal for servomotors. Assembly Recommended shaft tolerances h7. On request Hub bores D1 and D2 with separate tolerance class or range. Note Procedure for enlarging predrilled bores D1/D2 Drill the bore out using a small as possible drill or milling cutter. Use a single point tool to turn or bore the hole out to its finished size. Ensure that the coupling is securely held during the machining process and that the drill feed is not too high. The cut depth should not exceed 0.5 mm and the feed for the single point tool should also be not too high.

Also DVK-HD® pipe couplings with traction relief are ideal for a quick and safe use for pressure conveying. Their characteristics are equal to DVK-HD® pipe couplings: double secured massive aluminium clamps screws M12 with massive threaded bars very easy to mount due to circular version, nitrile gasket is temperature-resistant from -20°C to +80°C and safe for use with food optionally available with silicone gasket (-60°C up to +200°C) Additionally pipe couplings of type DVK-HD® with traction relief have the following product specifications: monobloc pipe coupling with traction relief with bridge part to safeguard against axial forces material: couplings in aluminium, clamps in galvanized steel pipe clamps and traction bars traction-resistant

PNEUMATIC SEALER CP 500 Electropneumatic sealer with double sealing impulse bar with (the resistance heat for a few seconds) suitable for closing packaging polyethylene, PVC and polypropylene, coupled aluminum, etc. It has four positions of voltage to the sealing bar, timer for adjusting the welding time and timer for the cooling time. The double sealing bar (top and bottom) welded from 3 mm allows the closing of envelopes very thick, laminated bags and bellows. The closing of the bars takes place by a pneumatic cylinder unit with pressure and pedal control. Maximum thickness weldable 0.25 mm. The CP 500 can be easily oriented from 0 to 90 degrees.

Bearing block and carriage aluminium alloy. Guide column and threaded spindle stainless steel. Plain bearing for guide columns and spindle nut highquality special plastic. Claw coupling aluminium with polyurethane coupling spider. Version Aluminium alloy anodised. Stainless steel hardened and ground. Threaded spindle with ball bearing. Note for ordering The unit is supplied with the position of cable outlet or control unit as shown in the drawing. Note Positioning stages for motorised adjustment and positioning tasks. The plain bearings and spindle nuts are suitable for dry running, however lubrication with a grease for plastic plain bearings is recommended. The suitable programming software and interface cable for the stepper motor with positioning control are available as accessories (2500015).

MANUAL LEVER SEALER WITH CONSTANT TEMPERATURE Thermosealing machine that works with sealing bars at a constant temperature for the closure of polypropylene bags and coupled/aluminum laminate, paper, barrier materials, etc. The sealing bars of the type "hot bar" are equipped with resistance and controller for controlling the temperature from 30 °C to 200 °C. The closing of the bars is through a quick manual lever that guarantees a high sealing pressure and allows the sealing of envelopes high thickness with or without side gusset. Attention: it is necessary to preheat for about 5 minutes. The sealer is available in two models: ME 300 CFH BZ with checkered knurled bars ME 300 CFH BL with longitudinally knurled bars

Sealing machine with stand and mechanical footswitch, constant heat sealing bars fot the closure of polypropylene bags and coupled in aluminum, paper, barrier materials, etc. The sealing bars of the type "hot bar" are equipped with resistance and temperature controller for controlling the temperature from 30 ° C to 200 ° C. The closing of the sealing bars by a mechanical pedal guarantees a high welding pressure and allows the sealing of high thickness envelopes with or without lateral bellows.

Our sight glasses for conveyor pipes have the following product specifications: Real glass pipe (borosilicate glass 3.3) Fire-polished pipe end Two aluminium pipe couplings Continuous stepped ring gasket Natural black rubber

Tabletop manual bag sealers with manual closing and electromagnetic block. Impulse heat sealing (the resistance heats for a few seconds) with timer for adjusting the sealing time and a timer for adjusting the cooling time. The sealing cycle is indicated by an indicator light. Sealing bar length: mm. 300 - 400 and sealing width of 5 mm, maximum thickness weldable 0.20 mm(mm. 0.40 total). Suitable for sealing plastic polyethylene bags of medium thickness, polypropylene, light coupled polyethylene + aluminum / paper.

ME-FDE SEALERS WITH DOUBLE MOTORIZED PULSE SEALING BAR AND TEMPERATURE CONTROL The new bench sealers with double impulse sealing bar and temperature control, allow the optimal sealing of any type of envelopes and sealable bags. The high pressure exerted by the motorized descent of the bars (0.7 Kg./cm2) allows perfect sealing even on very thick materials. The double active motorized sealing bar (heats above and below) and the 5 mm sealing they allow the closure of envelopes with high thickness, laminated and envelopes with bellows. In addition to sealing polyethylene, polypropylene, coupled paper, aluminum, pvc and medical bags, it also allows the sealing of advertising banners. To seal the banners, we recommend sending samples, without obligation, to carry out the sealing tests. Maximum sealable thickness 0.20 mm (0.40 tot). Timers for regulating the sealing and cooling temperature ensure maximum reliability on all types of material.

Semiautomatic table top version or with pedestal sealing machine with electrical pedal and double sealing impulse bar, (resistance to heat for a few seconds), suitable for closing envelopes polyethylene, polypropylene, PVC, coupled in aluminum, etc. The closing of the sealing bars by pressing the electric pedal with solenoid allows the operator to have both hands free. The timers for adjusting the sealing and cooling ensure maximum reliability of each type of material. Simple to use, requires no preheating. The double sealing bar (above and below) and the sealing of 5 mm. allows the closing of envelopes with thick, laminated bags and bellows. Through a selector switch, you can choose whether to use one or two sealing bars. Maximum solderable thickness 0.25 mm. (0.50 mm. overall). It's also available the model ME 6010 FDA / FDV with 600 mm sealing bars and 10 mm welding.

ME-ASD SERIES with 10 mm DOUBLE SEALING BAR BY IMPULSE WITH TEMPERATURE CONTROL Semiautomatic bench sealing machine with electric pedal and double impulse sealing bar with temperature control, (an electronic circuit prevents overheating and allows continuous operation), suitable for closing polyethylene, polypropylene, PVC, aluminum coupled bags, etc. The sealing bars are closed by means of an electromagnet with foot control. Timers for sealing and cooling control ensure maximum reliability on all types of material. The "cold closing" time allows the bars to remain closed for a time set by the operator and apply a pressure that reinforces the sealing. The ME ASD series sealers can in some cases be used for sealing advertising banners and creating pockets for fixing them.

Elastomer spider polyurethane Shore 98A. Coupling housing and clamping hub, aluminium. Expanding mandrel steel. Screws steel. Centring rings 1.4301 stainless steel. Version Coupling housing black anodised. Note The motor adapter set with elastomer dog coupling system (elastomer coupling with expanding mandrel) provides a simple and costeffective solution for connecting electric motors. Advantages of the elastomer dog coupling Hub with expanding mandrel can be mounted axially Playfree with vibration absorption Excellent retaining force Excellent concentric accuracy Short design Easy to assemble Can be mounted axially on spigot side Electrical insulation Nominal torque up to 30 Nm On request Larger hub bore D. Higher nominal torque.

Metal Bellows Coupling axial pluggable Backlash-free metal bellows coupling as axial pluggable execution Easy assembly / disassembly by simply plugging / pulling the coupling parts High tensile aluminum and special coatings ensure a durable solution at low mass / inertia For shaft diameters from 10 – 70 mm High torsional stiffness, compensation of shaft misalignment at low restoring forces Perfect bellows coupling for servo drives, e.g. in testing equipment, automation techniques, packing machines Torque range: 18 – 500 Nm

Custom precision metal machining parts, quality precision machined parts, stainless steel coupling •Material: Aluminum ,Stainless steel ,Carbon steel ,Brass ,Copper ,Bronze ,Plastic or as per your requirements •Equipment: Machining center, CNC, Lathe, Turning machine, Milling machine, Drilling machine, Internal and external grinding machine, grinding machine, Tapping drilling machine, •Surface finish: Polishing, and Chrome plating, zinc plating, blackening, Nickel plating, Electrophoresis, etc. All parts produced according to your CAD and 3D drawings or sample. Please send the drawings firstly, we will offer our quotation to you within 2 days. •Our factory is specialized in manufacturing CNC machining products according to customers drawings or samples •Advanced equipment, excellent R&D teams and strict quality control system •These kinds of parts were made by high precision CNC machines. All the dimension were made as per customer requests .

Overground Fire Hydrant / Body, Lower and Upper Pipe: GG-25 Cast Iron / Coupling: Aluminium Alloy / Handwheel : GG-25 Cast Iron / Disc : GGG-40.3 Ductile Iron / Check Valve: Brass / Upper shaft : Stainless Steel / Shaft motion pipe: Galvanized steel or Stainless Steel ** Application area: Fire installations

We supply IBK folding clamp couplings in brass, stainless steel, aluminium and PP. Our couplings have proved their worth under hard conditions in steel works and are regarded as standard. Material: - Couplings made of brass - Seals made of NBR (optionally of EPDM or Viton) - Clamp made of stainless steel Attribute: - Vacuum sealed for suction lines - No danger of icing - Interchangeable with systems of the same kind (MIL C-27450) - Suitable for closing male and female parts Temperature: - Working temperature from – 40°C to + 120°C, for higher temperature inquire suitable seal Pressure: - Max. 16 Bar working pressure –> Safety Factor 4 - Vacuum – 0,8 Bar Benefits of these couplings 1. perfect flow 2. No eddies form in the flow 3. the nozzles cannot fall out 4. the shells cannot slide about. 5. Precise fl ow control, impact-resistant, nonrusting 6. firm fit Special models on request! The dimensions stated are approximations. Subject to technical alterations

Quick Released Connector Camlock Quick Camlock Coupling in Aluminum and Stainless Steel Our company (Huan-Tai) is rooted in China since mid-90’s. As one of the early runners, we bring value to the table through our capabilities in engineering, quality control and schedule management that meet the high expectations of overseas customers in stability, consistency and predictability. We are proud of our core competence in industry leading production processes, spectrometer analysis, critical NDT and tight tolerance machining. Our most experienced fields are in mechanical products (including parts) for applications in marine, agricultural equipment, automotive industry, railways, oil exploration, mining, construction and aluminum smelting equipment. With many years of experience, we learned the rules and we know the expectations of customers and have become part of their competitive strategy for success in their respective field.

The propellers of AKAP sleeve fans, which can meet high air flow rates and high pressure losses, are made of aluminum raw material and they provide the chance to change the flow and pressure by adjusting the blade angles. They can be produced with a motor that can withstand temperatures of 200, 300, 400 °C for 120 minutes upon request.

coupling - with gasket thread size KP.STORZ.FEST.A.40.01.AL 4" Storz-A (133) KP.STORZ.FEST.B.30.01.AL 3" Storz-B (89) KP.STORZ.FEST.C.20.01.AL 2" Storz-C (66) KP.STORZ.FEST.C.25.01.AL 2.5" Storz-C (66) hose coupling - aluminium coupling - with gasket for hose Ø size KP.STORZ.SCH.A.090.01.AL 90 Storz-A (133) KP.STORZ.SCH.A.102.01.AL 102 Storz-A (133) KP.STORZ.SCH.B.076.01.AL 76 Storz-B (89) KP.STORZ.SCH.B.080.01.AL 80 Storz-B (89) KP.STORZ.SCH.C.050.01.AL 50 Storz-C (66) cap - with mounting chain size KP.STORZ.BLIND.A.01.AL Storz-A (133) KP.STORZ.BLIND.B.01.AL Storz-B (89) KP.STORZ.BLIND.C.01.AL Storz-C (66) coupling incl. limit switch - aluminium coupling - with cap and mounting chain - limit switch (10 m cable) thread size KP.STORZ.OROHR.A.40.02.AL 4" Storz-A (133) KP.STORZ.OROHR.B.30.02.AL 3" Storz-B (89) coupling (with pipe) - aluminium coupling - stainless steel pipe pipe Ø pipe length size KP.STORZ.MROHR.A.40.089.01.AL 88.9 500 Storz-A...