Counting system - Import export

100% COTTON SATIN Duvet Cover: 200 x 220 cm Flat sheet: 240 x 260 cm Oxford Pillowcase: 50 x 70 cm (2 Pieces) Reactive Printing Washable by Machine at 40 °C / 145 Thread Count Closure System for Pillowcase: Envelope Type Closure System for Duvet Cover: Buttons

100% COTTON RANFORCE Duvet Cover: 200 x 220 cm Flat sheet: 240 x 260 cm Pillowcase: 50 x 70 cm (2 Pieces) Reactive Printing Washable by Machine at 40 °C / 145 Thread Count Closure System for Pillowcase: Envelope Type Closure System for Duvet Cover: Buttons

Easy to install people counter with access control system and traffic light suitable for retail, catering, pharmacies and service providers. The display stand is placed on one side of the entrance and a reflector on the opposite side. Once the desired maximum number of people has been set, the system is ready for use without the need for a connection to the network or Internet. As soon as more people than specified pass the entrance, this is indicated by means of a traffic light system on the stand. The "Extended" version consists of two devices that are connected to each other by means of a radio link, thus enabling use in premises with two entrances/exits.

MOTORIZED STANDARD CONVEYOR TAPES WITH VARIABLE SPEED Motorized conveyor tapes are made of a structure in steel section with adjustable height supports and a smooth pvc carpet and a smooth pvc carpet moving on a sheet plane. They are used for the transport of boxes and packages in industrial and productive setting. They can be combined with weighing systems, counting, inkjet markers and used as transport systems and sorting boxes. If properly designed can also transport up/down hills Complete with motors of adequate power, electrical system and start/stop switch. The geared motor unit is installed inside of the supporting structure to limit the overall dimensions. The PVC carpet is full of guides and has the metal junction to make easier the disassembly, the cleaning to and the maintenance. The speed of tape is adjustable from 4 to 16 m/min by the convenient potentiometer.

Tecnimodern's slanted or vertical form fill and seal machines with very low loading height allow the production of polyethylene or polypropylene film bags from a flat film roll. The film can be neutral or coloured, with continuous printing or centred with print mark. These TEC30 packaging machines have the advantage that they can be equipped with either a thermal sealing system for heat-sealed films or an impulse sealing system for polyethylene films, depending on requirements. To meet the need for all types of packaging, feeding and product shapes, we offer various automatic feeding systems, such as: - Counting with vibrating or centrifugal trays - Weighing with linear scales - Dosing by augers or volumetric feeders

MOTORIZED STANDARD CONVEYOR TAPES WITH FIXED SPEED Motorized conveyor tapes are made of a structure in painted steel section with adjustable height supports and a smooth pvc carpet and a smooth pvc carpet moving on a sheet plane. They are used for the transport of boxes and packages in industrial and productive setting. They can be combined with weighing systems, counting, inkjet markers and used as transport systems and sorting boxes. If properly designed can also transport up/down hills. Complete with motors of adequate power, electrical system and start/stop switch. The geared motor unit is installed inside of the supporting structure to limit the overall dimensions. The PVC carpet is full of guides and has the metal junction to make easier the disassembly, the cleaning and the maintenance. The speed of tape is fixed so it cannot be regulated.

Rotary Slip-type Preset Pokayoke (Error-proofing) Torque Wrench A preset torque wrench that prevents 3 problems: under-tightening, over-tightening, and other human tightening errors. QSPCAMS and QSPCALS are rotary slip-type torque wrenches with wired limit switch. When set torque is reached, rotary slip occurs with simultaneous output of a contact signal from the limit switch. Signals from the limit switch are captured on a programmable logic controller (PLC) or similar device to establish a Tightening Assurance System using assembly line interlock controls. The limit switch can be connected to a CNA-4mk3 count checker (sold separately) to easily create a tightening count management system. The set torque cannot be changed without using a special tool (sold separately), preventing the operator from changing torque by mistake. QSPCAMS and QSPCALS have a highly durable curly cord. Length of standard MS/LS curly cord (when extended) ~2m. [...]

Thanks to its innovating system, SBL takes, counts and moves the bars for shearline feeding in a completely automatic way. With SBL you save money and enhance productivity due to its flexibility. Advantages 1. ‘SBL’ is extremely fast so it can feed more bars compared with manual feeding. The result is higher productivity per hour for any kind of shear line. 2. No need of hard and dangerous bar handling so no need of people for such operation resulting in great money saving. 3. The elimination of manual bar feeding enhances security at job site. 4. “SBL” special structure makes it possible to feed shearlines with higher a number of bars of different diameter and length resulting in a. drastic reduction in machine setup; b. plant overall dimensions determined by clients’ room available; c. higher flexibility of the plant.

Feminine Sanitary Napkin Sublayer Cut & Place (LN-SLCP) Feminine Sanitary Napkin Release Paper Cut & Place (LN-RPCP) Feminine Sanitary Napkin Wing Tape Cut & Place (LN-WTCP) Feminine Sanitary Napkin Bi-Tri Folding System (LN-BTS) Feminine Sanitary Napkin Stacking & Counting System (LN-SC)

Phoenix Machinery Hygiene Converting Division manufactures and retrofits Diaper Machines with the following equipments: Low Waste Back Ears Unit (BEU) Frontal Tape Cut & Place (FTCP) Refastenable Tape Cut & Place (RTCP) Sublayer Cut & Place (SLCP) Horizontal Stacking & Counting System (HSC) Backsheet Lamination Unit (BLU)

Adult Diaper AD−250 Main Technical Data Production speed Up to 250 pcs/min Production linear speed 200 m/min−max Efficiency 85-90% Product width (min−max) 480-800 mm Product length (min−max) 710-975 mm Required air pressure 6 bars Required air flow Approx. 8,000 Nl/min Noise Lower than, 85 dBA Basic Machine Features Full servo technology Electronic job change High quality multi-zone forming system with 2D/3D core design Inline & stand alone unwinders Automatic splicing units “ZERO SPEED” Automatic web guiding systems Full feature product User-friendly HMI panel Bi & tri-folding systems Horizontal stacking & counting system Advanced QCS system Safety measures conforming to “CE” standards Optional Machine Features Waist band application Long life carbide die cutters Dual core design

flexible, simple, efficient minimum setup-time (< 30s ) = maximum flexibility wide range of bag sizes ( 50 x 50 mm - 400 x 800 mm) with many additional features external dosing-counting-weighing systems for small and big quantities

Automatic stacking system is an automatic system used for automatic counting and crating of polyethylene (LDPE) pouches in containers (polyethylene or carton cases). This system can be integrated into the working line with a Vertical Form-Fill-Seal (VFFS) packaging machine of any make. SPECIFICATIONVALUE PACKED PRODUCTPolyethylene pouches POUCH TYPEPillow pouch TYPE OF STACKINGIn bulk at 3 points PRODUCTIVITY*, MAXUp to 600 cases / hour RANGE OF POUCHES COUNTING IN A BOXFrom 1 to 99 pouches (depending on case and pouch dimensions) ELECTRICAL POWER (MAXIMUM)0.4 Kw, 380±4% V (3 phase), 50 Hz AIR CONSUMPTION~ 0.8 m3/hour WEIGHT~ 160 kg

RNA offer as part of a total package the design and manufacture of bespoke handling systems which include vision systems and pick & place handling units often combined with vibratory bowl feeders. From a vision inspection system for checking out of tolerance components, counting systems for bagging machines, utilising the latest pneumatic and electric linear slide systems RNA can supply a system to move manipulate and handle your components.