Corner reinforcement - Import export

solidian Corner is a specially developed reinforcement for corner protection (inner and external corners). It connects the inside and outside of the wall together with solidian Connector LShape, solidian Connector Open End, and solidian Grid. It is installed directly in fresh plaster or by sprayup technology. long lasting, safe solution – corrosion free compatible with any type of wall – brick, concrete, stone compatible with all types of plaster on the market used in solidian earthquake system

kelteks Edge Protector is the NEW solution for the perfect corner reinforcement. Fluffy and cuddly fibers easily squeeze into sharpedged joints and corners so stresscracking and laminate chipping is effectively prevented.

kelteks Edge Protector is the NEW solution for the perfect corner reinforcement. Fluffy and cuddly fibers easily squeeze into sharpedged joints and corners so stresscracking and laminate chipping is effectively prevented.

kelteks Edge Protector is the NEW solution for the perfect corner reinforcement. Fluffy and cuddly fibers easily squeeze into sharpedged joints and corners so stresscracking and laminate chipping is effectively prevented.

kelteks Edge Protector is the NEW solution for the perfect corner reinforcement. Fluffy and cuddly fibers easily squeeze into sharpedged joints and corners so stresscracking and laminate chipping is effectively prevented.

kelteks Edge Protector is the NEW solution for the perfect corner reinforcement. Fluffy and cuddly fibers easily squeeze into sharpedged joints and corners so stresscracking and laminate chipping is effectively prevented.

kelteks Edge Protector is the NEW solution for the perfect corner reinforcement. Fluffy and cuddly fibers easily squeeze into sharpedged joints and corners so stresscracking and laminate chipping is effectively prevented.

kelteks Edge Protector is the NEW solution for the perfect corner reinforcement. Fluffy and cuddly fibers easily squeeze into sharpedged joints and corners so stresscracking and laminate chipping is effectively prevented.

kelteks Edge Protector is the NEW solution for the perfect corner reinforcement. Fluffy and cuddly fibers easily squeeze into sharpedged joints and corners so stresscracking and laminate chipping is effectively prevented.

kelteks Edge Protector is the NEW solution for the perfect corner reinforcement. Fluffy and cuddly fibers easily squeeze into sharpedged joints and corners so stresscracking and laminate chipping is effectively prevented.

Drawstring backpack made in soft non-woven material, available in a wide range of eye catching colours. Black color strings and corners reinforced with metal eyelets for extra resistance. Non-Woven

COMPOSITION AND APPEARANCE Resin, water, calcium carbonate, lightening fillers, preservatives and various adjuvants. The resulting paste is white in color. SUBSTRUCTURES ADMITTED All types of plasterboard with or without insulation with tapered edges and cardboard faces. COATINGS Printing undercoat for gypsum plasterboard. Smoothing coating. TECHNICAL CHARACTERISTICS - Adhesion of the tape: > 1000 g - Cracking: no cracks up to 5 mm thick - Density: 1.2 STORAGE 9 months in original unopened packaging, protected from frost and heat. APPLICATION Before treatment of the joints themselves, the panels must be filled between accidentally non-joined panels and various fillings). The application is done manually by "buttering" the thinned panels with a 10 or 15 cm coating knife and placing the strip in place. Then carry out a finishing pass, let dry and finish to mask the strip. For vertical protruding corners, use a reinforced strip or a metal angle iron.

solidian REMATs are produced of our noncorrosive and extremely strong solidian REBARs. The rebars are attached to each other by durable and solid injection molded crossing points forming the rigid mat. As a result, solidian REMATs are combining the same unbelievable mechanical properties of our solidian REBARs with the efficient handling of a robust mat on site. You do not need to knot together with your rebars in your prefab plant or construction site saving time and money. The solid injection points are enabling that you can walk on solidian REMATs. So what is the argument to still use steel or stainless steel? corrosionresistant thinner concrete cover, longer service life, lower refurbishment costs reduced weight with higher tensile strength high tensile strength lower overall construction costs electronically isolating and nonmagnetic

Ideal addition to our anchoring system for patching holes and preventing cracks. Even the strongest wall can have some weak spots. Patch them up with the strongest carbon reinforcement on the market. No measuring and cutting needed! Take out of the box and apply our solidian Patch Square Carbon just like that. Strong carbon fiber reinforcement mesh Up to seven times higher tensile strength compared to structural steel No corrosion so it’s very durable Our special solidian ANTICRACK rough sanded surface for superior bonding properties 3D corner shaped to all corners and edges Connects walls with ceilings and floors Easy to handle and apply

Cracks usually appear first where the building structure is the weakest joints, corners, edges! And cracks can travel through walls over time if they are not stopped, further weakening the structure of your building. We think it is best to make sure that cracks do not start in the first place. Strong carbon fiber reinforcement mesh Up to seven times higher tensile strength compared to structural steel No corrosion so it’s very durable Our special solidian ANTICRACK rough sanded surface for superior bonding properties 3D corner shaped to all corners and edges Connects walls with ceilings and floors Easy to handle and apply

Cracks usually appear first where the building structure is the weakest joints, corners, edges! And cracks can travel through walls over time if they are not stopped, further weakening the structure of your building. We think it is best to make sure that cracks do not start in the first place. Our solidian corner 3D out is specially developed to create the strongest bond in most difficult places of a building. Connecting the ceiling or floor with with an outsidecorner, for example on a chimney, is the most important part. No measuring and cutting needed! Take out of the box and apply our solidian corner 3D out just like that. Strong carbon fiber reinforcement mesh Up to seven times higher tensile strength compared to structural steel No corrosion so it’s very durable Our special solidian ANTICRACK rough sanded surface for superior bonding properties 3D corner shaped to all corners and edges Connects walls with ceilings and floors Easy to handle and apply

Cracks usually appear first where the building structure is the weakest joints, corners, edges! And cracks can travel through walls over time if they are not stopped, further weakening the structure of your building. We think it is best to make sure that cracks do not start in the first place. Our solidian corner 3D in is specially developed to create the strongest bond in most difficult places of a building. Connecting the ceiling or floor with with an outsidecorner, for example on a chimney, is the most important part. No measuring and cutting needed! Take out of the box and apply our solidian corner 3D out just like that. Strong carbon fiber reinforcement mesh Up to seven times higher tensile strength compared to structural steel No corrosion so it’s very durable Our special solidian ANTICRACK rough sanded surface for superior bonding properties 3D corner shaped to all corners and edges Connects walls with ceilings and floors Easy to handle and apply

1. Door frame 85 mm 2. Residential sash 130 mm 3. 60 x 45 x 2 mm steel, closed by welding, for an enhanced reinforcement 4. Residential door hinges 5. Weldable corner for an enhanced reinforcement 6. Additional seal on the sill 7. Aluminium drainer 8. Aluminium lintel with heat barrier 9. Insulation Gaskets: 2 10. HPL plate 2 mm / Aluminium 2 mm / 40 mm thickness Optional: cylinder with the manufacturer's key.

1. Door frame 83 mm 2. Residential sash 130 mm 3. 60 x 40 x 2 mm steel, closed by welding, for an enhanced reinforcement 4. Residential door hinges 5. Weldable corner for an enhanced reinforcement 6. Additional seal on the sill 7. Aluminium drainer with brush and gasket 8. Aluminium lintel with heat barrier 9. Insulation Gaskets: 3 10. HPL plate 2 mm / Aluminium 2 mm / 52 mm thickness Standard: cylinder with the manufacturer's key.

1. Door frame 103 mm 2. Residential sash 126 mm 3. 60 x 45 x 2 mm steel, closed by welding, for an enhanced reinforcement 4. Residential door hinges 5. Weldable corner for an enhanced reinforcement 6. Additional seal on the sill 7. Aluminium drainer with two brushes included 8. Aluminium lintel with heat barrier 9. Insulation Gaskets: 3 10. HPL plate 2 mm / Aluminium 2 mm / 52 mm thickness Standard: cylinder with the manufacturer's key.

Vegetable and Fruit Cardboard Boxes The crate for fruits and vegetables is made of natural colored CO5 corrugated cardboard. These types of crates are intended for the transport of fruits and vegetables, because they are resistant and represent an ideal packaging solution. At the same time, the crates are made of environmentally friendly materials and are 100% recyclable. Features: - Corrugated cardboard CO5, 5 layers, 5 mm thick, reinforced at the corners, self-forming; - The structure of increased resistance, reinforced at the corners and walls with 5 layers; - It is optimized for palletizing; stacking can be done vertically depending on the weight and volume of the products; - Ideal for cold storage; - Natural color;

90% White/Brown Containment Screens Made to your size specifications. Comes with reinforced webbing & reinforced corners grommets on 24" centers. Flame Retardant Properties

95% White Shade Containment Screens Made to your size specifications. Flame Retardant Properties Comes with reinforced webbing & reinforced corners grommets on 24" centers.

85% Black Shade Containment Screens Made to your size specifications. Comes with reinforced webbing & reinforced corners grommets on 24" centers.

Waterproof shade sail, 5x5m shade, white On hot days, we dream of relaxing in the fresh air under the shade. Thanks to a sail, it is possible because it will effectively protect the terrace, balcony or other place from the sun. Product specification: - Waterproof, resistant to moisture, mold and dirt - Material: 190g polyester - Ring - D (5mm) stainless steel in each corner - Reinforcing tape (25mm) - Perfect for shading the garden, swimming pool, terrace - Protects against harmful UV rays -High-quality fabric is washable - Elegant appearance You can mount the sail according to your needs - you can hang it horizontally, vertically, at any angle you want. All elements and edges are sewn with a strong thread, thanks to which the sail will stay in any position and is resistant to weather conditions.

Plastic box with closed walls and bottom. With additional reinforcements in the corners to increase the strength of the product. Convenient handles are formed at the ends of the boxes, so the boxes are easy to carry. Due to the standardized box dimensions, this model can be compactly stacked on euro pallets. The boxes hold firmly on top of each other.

We are experts at custom flag printing! Fully finished, ready to fly, with rope, eyelets or any other finishing specification. Use these on traditional flagpoles, at sea or for any bespoke application. No limits on size and no minimum order quantity. We produce our printed flags using EFI-REGGIANI POWER 340cm Direct Sublimation printing machines. Our flags are printed with 100% Knitted Polyester 115gms fabric single-sided mirror effect image with 95% Ink penetration and double sewed stitch for extra holding. We can provide full color custom designs with 2400dpi and 1.024m / per hour production speed. Daily capacity of 2000pcs digital printed polyester flag banners sewed double stitch with reinforced corners and metal eyelets.We also print SEG Backlit, Frontlit, Satin and other polyester fabrics for Sign and Advertisement, Fashion, Home Textile, International Sporting Events and more. Contact us for a special quotation on other flag materials.

National Flag 150x90cm We are experts at flag printing! Fully finished, ready to fly, with rope, eyelets or any other finishing specification. Use these on traditional flagpoles, at sea or for any bespoke application. No limits on size and no minimum order quantity. We produce our printed flags using EFI-REGGIANI POWER 340cm Direct Sublimation printing machines. Our flags are printed with 100% Knitted Polyester 115gms fabric single-sided mirror effect image with 95% Ink penetration and double sewed stitch for extra holding. We can provide full color custom designs with 2400dpi and 1.024m / per hour production speed. Daily capacity of 2000pcs digital printed polyester flag banners sewed double stitch with reinforced corners and metal eyelets.We also print SEG Backlit, Frontlit, Satin and other polyester fabrics for Sign and Advertisement, Fashion, Home Textile, International Sporting Events and more. Contact us for a special quotation on other flag materials.

Galvanised Mini Mesh Beads for internal thin-coat plaster application. Mini mesh corner bead is used to reinforce and protect one-coat finish of plaster on corners at its weakest point on internal walls and plasterboard. The mini mesh bead has a greater area of expanded metal therefore gives a better mechanical key.