Corner profiles - Import export

Corner profiles are elastic and provide good sealing at different angles, and are widely applicable in construction and industry. Available in both EPDM, TPE and other materials. Due to elasticity, sealing is possible at different angles EPDM and TPE UV and ozone resistant, can be used both indoors and outdoors Long lifespan

Corner profiles made of PVC, with fiberglass mesh, are used to provide rigidity, protection and aesthetics to the outer corners of surfaces finished with various types of plaster. Perforated PVC corner with plaster mesh for leveling and strengthening corner walls covered with plaster, and is also used for cladding internal structures and structures. It is installed under putty and plaster. An aluminum corner with a mesh ensures the creation of external corners with regular geometric shapes, and also protects against mechanical damage. Perforated PVC corner with plaster mesh is intended for: Reinforcement of edges of corners, windows and doorways; Protection of corners from mechanical damage; Prevents cracking; Creates a perfect right angle. Higher density mesh used

This poster frame is characterised by its narrow 15 mm profile and mitred corners, at the same time this is the thinnest profile we have in our range. Due to the narrow profile, this frame fits harmoniously into the existing environment of the place of use. The covers used are made of anti-reflective, UV-stabilised material, which prevents the posters from fading. The rear wall of the click frame is made of weather-resistant polystyrene. The folding technique of the frames guarantees a quick change of the inserts. For the optimal clamping effect even after years, clamping springs made of spring steel are always used. As a result, the click frame can also withstand frequent use over the long term. The simple assembly of the aluminium poster frames is mainly done by screwing. For this purpose, each click frame has one or two holes in both longitudinal lower profiles, depending on the size.

Ideal as paving edging, gravel stop profile, boundary profile and for green roofs. Different material thickness and heights from 15 to 250 mm. Accessories: inside corners, outside corners, connectors and cover profiles.

A high quality whiteboard made of white enamelled steel. The robust whiteboard is durable and ideal for frequent use. The inscription board is designed with anodised aluminium Softline profiles. Grey plastic corner pieces round off the edges. You can use the storage strip at the front to store writing tools or magnets. Select the whiteboard with or without printing. The whiteboard is also available in many different sizes.

Corner and plugin profiles and seat support covers TC products aren’t always apparent at first glance. They often resolve problems in complex assemblies. For instance, they are used to meet the need for a component that has good thermal insulation properties, but is also lightweight and has a high mechanical load capacity. Providing solutions with composite materials Lightweight yet high rigidity and strength Good thermal insulation Freedom in design for customised shapes Highquality, paintable surfaces Undercuts can be created in the profile Universal for radio waves

1. PA2CNC EASY II CNC automatic cleaning machine equipped with 7 tools for complete cleaning of the welded corner capable of working profiles of any shape (linear, internal radius, external, etc.), with a maximum height of 185 mm and a minimum of 35mm. The integrated tools are: a) two reversible blades for cleaning the flat part with one side dedicated to finishing with trenches and the other to rinsing; b) radial blade to clean the rounded part; c) an upper and a lower vertical milling/drilling unit for different types of processing such as joint channeling or particular finishes depending on the shape of the profile; d) Ø250 blade with movement in two axes; e) hook for cleaning the anchoring area of ​​the glass ball. 2. Automatic dimensional self-recognition of the profile to be machined and positioning with automatic centering of the square to be cleaned.

1. PA2CNC – Automatic CNC spoke polishing machine equipped with 9 tools for complete cleaning of the welded corner, capable of working profiles of any shape (linear, internal, external radius, etc.), with a maximum height of 200 mm and minimum 35mm . The integrated tools are: a) four reversible blades for cleaning the flat part with one side dedicated to the trenching finish and the other to the smooth pass; b) radial blade to clean the rounded part; c) an upper and a lower vertical milling/drilling unit for different types of processing, such as joint channeling or particular finishes depending on the shape of the profile; d) Ø250 blade with movement in two axes; e) hook for cleaning the anchoring area of ​​the glass ball. 2. Programming is carried out in self-learning and the resulting program is transformed into ISO language (upon request, the machine can be equipped with an ISO interpreter).

Bella Folding Glass Balcony Systems offer a perfect aesthetic by using aluminum cover profiles instead of transparent gaskets. In this way, there are no problems such as yellowing or breaking, and it also acts as an additional handle for the users. Bella Folding Glass Balcony offers a perfect solution even in difficult application areas with its frame extension profiles and corner turning profiles that offer functional and decorative solutions. There are 5 different color options in aluminum profiles, so a design suitable for every taste can be created

This system has a wide range of products and offers users the opportunity to adapt to various details. It is equipped with features such as 90 mm and 150 mm sill profiles, grayage and interconnection profiles, angled corner turn, 90° and 135° corner turn, dropper, aluminum threshold, various closing profiles and sill mounting profile. This diversity offers users solutions for different needs

Rhimex supplies over 5000 rubber profiles from stock in factories in the EU. Glued or vulcanized corners, inflation profiles, and profiles in different colors are just a few of the many possibilities. If the rubber profile you are looking for is not available in our wide range, we can have it custom made for you, in specific lengths or, for example, in frames. For €95 we will make a tool for you for exactly the rubber profile you need. The possibilities are endless! Feel free to contact us, we are happy to help you! WWW.RHIMEX.COM #constructie #bouw #future #toekomstbestendig #maatwerk #industrie #industry4_0 #energietransitie #energytransition

Profiles for Industrial Applications. In the large group of industrial applications (refrigeration and air-conditioning technology, machines, production lines, switchgear housings, wind power, tracked crane systems, containers, etc.) we produce individual sealing systems tailored to our customers’ needs. Special designs made on short notice--even in small series--made of diverse plastic or elastomer qualities, or combinations of both materials or assemblies lets us be your technical problem solver. Our huge stock of standard profiles makes us a reliable partner for a wide-range of applications. Sealing Profiles Through application-specific production of rings, frames or fixed lengths, the product is precisely tailored to any purpose. The function of the profile is optimally executed even in the radiuses or corners. We manufacture ready-made profiles in various processes, from cold bonding, film bonding, injection molding to sealing.

Dowels with a nail for quick installation of OMAX Countersunk / cylindrical / mushroom-shaped side (assembled) The main purpose is to attach to concrete, solid materials, bricks with voids, foam concrete all kinds of wooden parts, including a plaster crate, frames, docking wall or plaster profiles, baseboards, wall corners, as well as cable ducts, cable clamps and pipes, sheet steel, etc. The OMACH nail dowel is simply hammered. The mount can be dismantled or loosened with a screwdriver.

*Metal profiles omega, furring channel, ceiling C & ceiling U convenient for suspended ceilings *Stud, track, L corners convenient for partition walls *Profiles are available with different sizes according to the type of use *Manufactured in accordance with EN standards: EN10346 and EN10143 *Great quality of galvanized steel grade DX51D *Minimum 100gr/m2 galvanize coating *Available in 0.40, 0.50, 0.60mm thickness *Custom size on demand *High resistance against corrosion and fire

Hot rolled steel sheet is produced at factories in our country , its scope is extremely wide both in everyday life and in mechanical engineering and construction. Hot deformed sheet is used to make Armored doors; Boxes and other square shapes; Awnings; Fences; Steel structures ; Press forms; Weight blocks; Auto, mototechnics, agricultural machines, tractors; Hangars; Wagons; Machine tools; Steel strip ; Channel and bent corner ; Profile pipe , welded, longitudinal seam ; Bridges, passages and other floors; Lifting equipment; Decking ; Tool. Hot rolled sheets are also made from steel coils. Overall dimensions of gk sheet width from 1 meter to 2.5; length from 2 to 6 meters. The price of hot rolled (hot rolled) sheet is displayed in the price list on the website. You can contact us by mail - marketing@stalevar.com or by phone +380675624220.

Our locally manufactured PVC movement joints / expansion joint beads are designed for function and speed on all external and internal rendering and plastering applications. Discreet but strong, all beads give a perfect finish to every type of render including through colour render. Designed to prevent cracking to render through thermal expansion and compression. Must be used over a structural movement joint once settling is complete. Can be used horizontally as a day joint to disguise a break in the application of render and provide an attractive architectural detail with a gentle shadow. MJ4 can be folded through 90 degrees to form an internal corner on plasterboard and all profiles can be fitted in this way if a movement joint is required in an internal corner.

Machine is ideal for welding process of PVC plastic profiles at four corners. Fully automatic four corner welding of PVC window profiles at an angle of 90° Welding of a complete window frame or sash in one cycle All profile related welding parameters are individually programmable User-friendly operating system compatible to all optimization programs Parameters are set easily by means of 8’’ LCD color touch screen Automatic line can be made by combining with Cooling Unit (SA 250),Corner Cleaning Machine (CNC 608-610) and Rotating Robot (SA 260) Automatically setting of standard (2 mm) or seamless (0.2 mm) welding options Long time of Teflon using period by means of the roller system Automatically discharging of the frames after welding operation Colored and white profiles selection modes Saving of time by means of practical mold change system Operator safety barrier Adjusting the heat between 0-300°C via electronic thermostat Minimum welding measurement : 400 x400 mm

Cnc controlled 4 corner pvc profile welding and cleaning line enabling movement in 2-4 axes Yılmaz makine custom profile cleaning programming Manual and automatic operating modes, Automatic profile recognition Automatic profile cleaning blade with 11 sets Separate cleaning blades for color and white profiles Profile width & height and frame wing control sensor Automatic bearing lubrication system Windows based touchscreen computer Profile program transfers via USB flash memory Remote connection and technical support capability Movable control panel, In process speed changes 220 frames/8 hours ( CNC 608)-270 frames/8 hours (CNC 608) On screen alarm and warning displays Phase control system, Low pressure control system Ability to clean all 4 corners and end-of-line transfer with automatic profile rotation robot Automatic system allowing for movement in Ø3 axis (X, Y1, Y2) Yılmaz makine custom 0,2-2 mm. welding interval automatic transfer Automatic operating mode

PRODUCT INFORMATION Manual press machines that open corner joint slots on the corners of aluminum profiles manually. GENERAL FEATURES Opens corner joint holes on the aluminum profiles Opens corners up to 1.5 mm of thickness Practical operations The ergonomic design of the body Special punch tool set hardened TECHNICAL SPECIFICATIONS

PRODUCT INFORMATION Manual press machines that open corner joint slots on the corners of aluminum profiles manually. GENERAL FEATURES Opens corner joint holes on the aluminum profiles Opens corners up to 1.5 mm of thickness Practical operations The ergonomic design of the body Special punch tool set hardened TECHNICAL SPECIFICATIONS

PRODUCT INFORMATION Manual press machines that open corner joint slots on the corners of aluminum profiles manually. GENERAL FEATURES Opens corner joint holes on the aluminum profiles Opens corners up to 1.5 mm of thickness Practical operations Ergonomic design of the body Special punch tool set hardened TECHNICAL SPECIFICATIONS

PRODUCT INFORMATION Manual Press machines which open corner joint slots on the corners of aluminum profiles manually GENERAL FEATURES Opens corner joint holes on the aluminum profiles Opens corners up to 1.5 mm of thickness Practical operations The ergonomic design of the body Special punch tool set hardened TECHNICAL SPECIFICATIONS

PRODUCT INFORMATION This machine is ideal for the single corner welding of PVC profiles between 30°- 180°. Enable the welding of all angles between 30°-180°infinitely adjustable All parameters such as melting and welding time, welding pressure are set independently Automatically start and finish the welding cycle Adjusting the heat between 0-300°C by means of the electronic thermostat Smooth welding operations for long profiles by means of rotating support arms Maintenance friendly, for example cleaning of the heater plate and changing of the Teflon is very easy by means of quick change system Practical adjustment of standardl (2 mm) or seamless (0.2 mm) welding options manually Standard equipped with height adjustable profile support arms on both side Clamping the profiles separately via foot pedal Saving of time by means of practical mold change feature Portable machine stand OPTIONAL ACCESSORIES Machine according to the profile height of 165 mm

PRODUCT INFORMATION Machine is ideal for welding process of PVC plastic profiles at two corners. Fully automatic two corner welding of PVC window profiles at an angle of 90° Possibility of precise welding and cleaning of profiles between 30°-180° on the left head All parameters such as melting and welding time, welding pressure are set on the control panel independently Continuous precision of welding quality by means of linear rails Welding two corners of window frames or sash profiles are carried out in one cycle User friendly with practical Teflon change feature by means of the roller system Saving of time by means of most practical mold change system in the market Capable of adjusting the clamp and weld ing pressure according to the profile type Adjusting the heat between 0-300°C via electronic thermostat Practical setting of standard (2 mm) or seamless (0.2 mm for free of flashes) welding options