Results for
NC MANUFACTURING AND ENGINEERING
Turkey
Heat transfer between a gaseous media and a liquid finned tube heat exchangers are often called air/water heat exchangers or gas/water heat exchangers. Heat transfer between a gas (for ex. air, steam) and a liquid (for ex. water, seawater, oil) takes place in the air-/water heat exchangers. Very often air/water heat exchangers are used as exhaust heat exchanger to gain the energy out of warm or hot exhaust fumes. Finned tube radiators can also be used as air heater, air cooler or condenser To improve the thermal output transfer from the gas to the liquid, fins made of well heat transferring materials are put on the tubes. The great increase of the thermal efficiency when applying fin tubes allows a substantial reduction in size and costs of such cooling equipment. The surface of such tubes is substantially increased and consequently less tubes are required compared with exchangers with plain tubes.
Request for a quoteKASAG SWISS AG
Switzerland
KASAG experts are specialists in the construction of kettles, industrial cooking plants for the production of fruit base, vegetables and sauces. Its comprehensive systems that include cookers, coolers, condensers, piping and valves are being built according to current requirements in aseptic design. Preventing product contamination caused by germs in the products is a central concern. This is enabled through optimized equipment design, special bearing and mechanical seals and a functional CIP(Cleaning in Place) facility. We adapt to the needs of each and every new customer and seek to build customized or modular plants that fulfil their requirements to the maximum extent.
Request for a quoteANTHERMO GMBH
Germany
Air heat exchangers as finned tube heat exchangers Heat transfer between a gaseous media and a liquid Finned tube heat exchangers are often called air/water heat exchangers or gas/water heat exchangers. Heat transfer between a gas (for ex. air) and a liquid (for ex. water) takes place in the air-/water heat exchangers. To improve the thermal output transfer from the gas to the liquid, fins made of well heat transferring materials are put on the tubes. Very often air-/water heat exchangers are used as exhaust heat exchanger to gain the energy out of warm or hot exhaust fumes. Finned tube heat exchangers can also be used as air heater, air cooler or condenser.
Request for a quoteFRIGOFLUID S.R.L.
Italy
The PAD-V adiabatic system is the optimal solution for increasing the efficiency of air systems, with capacities from 75 to 1,100 kW. Dry operation during cold periods: ambient air is drawn in and conveyed to the heat exchange coils (where the fluid to be cooled passes through): no water in the circuit, as during standard dry cooler operations. Energy use is also optimized by electronically modulated fan speeds based on temperatures. Adiabatic operation during hotter periods: outside air passes through the humidifier pack to be pre-cooled, before being conveyed to the finned coils and performing its cooling function: efficiency is increased. This also makes it possible to work at lower ambient temperatures.
Request for a quoteMITA COOLING TECHNOLOGIES
Italy
Ideal for water saving maintaining a high efficiency. All operations are managed by PLC with the possibility of remote management in “Industry 4.0” mode. Both HVAC and refrigeration sectors can be served.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
MITA COOLING TECHNOLOGIES
Italy
Ideal for water saving maintaining a high efficiency. All operations are managed by PLC with the possibility of remote management in “Industry 4.0” mode. Suitable for both industrial and HVAC fields of application. The adiabatic cooler, sometimes called adiabatic dry cooler or dry cooler with adiabatic pre-coolers, is designed to work with both air and water, with particular attention to efficiency. The external air is used to cool the liquid during dry operation and it is pre-cooled only in hot periods with wetting cycles of about 15 seconds during adiabatic operation (“adiabatic pre-cooling”).
Request for a quoteROTAIR SPA
Italy
Box-type compressor with compact footprint and low weight, conceived, designed and manufactured to be installed on service trucks, to work in heavy road assistance and repairs, to provide compressed air wherever it is needed. Special sandblasting model, with integrated after-cooler and condensates filtration, available Box-type design, low weight and reduced footprint Pallettized, with lifting hook for easier handling One-side easy access for mainenance and refuelling All air valves and fluid drains on the same side Curbside control panel on the side of air and fluid outlets Lowest acoustic pressure levels as indicated in current legislation provisions Emissions according to the latest parameters Intelligent System – avoids starting load on engine and ensures low pressure shut down.
Request for a quoteMITA COOLING TECHNOLOGIES
Italy
To get the maximum performance with minimum energy and management consumption, it is important that your cooler is always maintained at maximum efficiency. Checking the general condition of the main parts (in the case of an evaporative cooling tower: fill pack, motor fan unit, distribution, etc.), allows to maintain the functionality over time. For this purpose MITA offers a wide range of spare parts, solutions to restore and ensure the initial efficiency. Some advantages of spare parts for cooling towers and other cooling technologies. - Set of original spare parts for the first 5 years of operation: at an attractive price. - Certainty of immediate availability for original spare parts. - Spare parts corresponding to the original on request. You can also ask MITA Service for maintenance work on evaporative towers, evaporative condensers, adiabatic coolers and chillers of any brand.
Request for a quoteKELVION HOLDING GMBH
Germany
The wide range of product portfolio of coils with different tube diameters, tube patterns, fin profiles, materials and options allows us to customize our coils for any specific application and fluids: air heaters, air coolers, condensers and evaporators for HVAC and various industrial applications. Kelvion heat exchanger coils are manufactured with copper tubes and aluminum or copper fins. The fins are equipped with special profiles developed at our R&D department enhancing heat transfer and keeping pressure drop at a moderate level. The customized fin spacing is achieved by collars which also provide the contact between the fin block and the tubes. Mechanical expansion of the tubes guarantees a perfect bond between the fins and the tubes leading to maximum heat transfer between both fluids.
Request for a quoteKELVION HOLDING GMBH
Germany
Kelvion Condensers and Gas Coolers are based upon modular designs. We offer various fan sizes, multiple speeds and suppliers, coupled with an extensive range of tube and fin profiles, to enable products to be tailored accurately to meet the application demands. The wide range of fan choices ensures that the optimal balance between air volume and capacity, operational noise levels and power consumption to meet market price levels are achieved. The tube and fins can be supplied in various materials, depending on the internal or external corrosion properties.
Request for a quoteC2 SALES EQUIPMENT
United Kingdom
Cooling Tower. Evaporative condenser build in FRP
Request for a quoteResults for
Coolers condensers - Import exportNumber of results
12 ProductsCompany type
Category