Conveyor belt cleats - Import export

The Keiper UNITRANS conveyor belt series can be fitted with numerous different cleats and entraining elements. Cleats and entraining elements are used for ascending or descending conveyor systems, linear movements and whenever lateral forces occur. With these elements it is easier to carry along, transport and place the products to be conveyed. Conveyor belt cleats made of PVC and PU – with or without fabric interlayers – in blue, white, green, petrol or transparent. Depending on the design, they are resistant to oil and grease, have FDA/EU approval. PVC/PU cleats made of belt material can be produced in a straight design or with an inclination of approximately 60° or 80° respectively. We also have a wide range of special cleats such as, for example: PVC 60° Shore A, closed-loop cleats, profiled cleats made of belt material, fabric and felt cleats, and special forms based on the customer’s requirements.

Keiper profiles and cleats Many special, innovative tasks required in the material flow, such as pacing, separating or positioning, can be realized by adding profiles/cleats and entraining elements to the belts. Profiles and entraining elements are made of the same high-quality polyurethane as our timing belts, are mechanically processed as sheets or injection molded. They are available in different blends and degrees of hardness, with glass-fiber reinforcement and in a matching color. The profiles and entraining elements are homogeneously fastened to the belt by welding or glueing. In view of our production methods, the cleats can be formed into any shape.

germanBelt® chevron conveyor belts are used to transport material at steep angles of more than 20o. In contrast to smooth fabric belts, chevron conveyor belts are equipped with cleat profiles with heights of 17 mm and 35 mm that enable the belts to meet the specific requirements of steep angle transport. Divers cover qualities and a variety of profile heights provide a wide range of application. Transport of sand, gravel or stones/rocks; Transport of oil-containing or hot material as, for instance, in the recycling industry. germanBelt® chevron conveyor belts offer significant cost benefits and ensure highly reliable transport. In the following, you are provided with an overview of the most frequently requested germanBelt® chevron conveyor belt configurations. If you have special requirements as to profile height or cover quality of chevron conveyor belts we also offer tailor made individual solutions and give you advice on how to deal with your specific transport problem.

PU timing belts with easy joint as strong as a welded joint The easy joint timing belt fastener is the perfect solution, for a quick and easy mechanical endless connection of PU timing belts. Assemble without disassembling, without stopping your production line Replace your belts in few minutes without disassemble your hoods, pulleys, axis. Reduce your production downtimes. The method of mechanical assembly and fastening system easy joint offers unique solutions for easy and fast repairs of power transmission belts or conveyor belts. Pitches: H / T10 / AT10 / T20 / AT20 / 8M / 14M Standard: Polyurethane 90° Shore A grey Versions: Standard, PAZ, PAR Cords: reinforced with a Polymercord around the Pin in each tooth joint, arranged in parallel Width: from 10 to 150mm, (wide belts possible on request)

Our endless turned round belts are wound either out of one homogeneous strand or one cord and spliced endlessly without thickening. For special applications, it is possible to vulcanize the inner splice or to make a special splice based on our in-house engineering methods. This increases the tensile strength by up to 60%. In elastic types, the core is welded. In view of their special structure, twisted round belts exhibit very quiet running properties, are extremely flexible and, thus, make possible very small minimum pulley diameters of 3x belt diameter. For several types, speed up to 70,000 rpm is possible; however, the speed of 60m/s should not be exceeded. Elastic types: PU, Vulkollan Semi-elastic types: PA.6, Set-Polyester, Nylon, HE Types with limited extensibility: Polyester, Nomex, Nomex-PTFE, Polyester-PTFE, Kevlar/Twaron, PA.6 anti-static, PBO

Endless extruded round belts Our endless extruded round belts are ideal for low power requirements. They are elastic power transmission elements that do not need cost-intensive tensioning devices. In view of the special production process, they do not have any welding seams or terminal connections and run very smoothly. Moreover, they allow a minimum pulley diameter starting from 5.5 x belt diameter. Our types E80, V75, C70 and P82 are made of specially selected and dynamically tough materials. In addition, type E80 also is antistatic to a limited extent and has a resistance value of about 106 Ohm; thus, it is excellent for use in electronic devices and chip production. Available diameters: 1.8mm - 7mm Available lengths: 40mm – 1,610mm Temperature resistance: -20°C - +160°C Coefficient of friction: 0.35µ - 0.9µ* Maximum tension: >100N

Round hook belts are the ideal solution for power transmission or conveying systems where several belts run on one shaft. Since they are easy to install, downtimes and maintenance costs can be reduced significantly. The hook belts only have to be inserted. Then the belt is joined to the hook and the second side of the hook is closed with pliers. Thus, there is no time-consuming and cost-intensive assembly work.

PU V-belts run individually or alongside one another and convey products on slightly ascending or descending conveying systems without allowing the products being transported, e.g. boxes, tiles, glass slabs, cardboard articles etc., to slip. In addition, PU V-belts are used for driving live roller conveyors. Standard stock program: 75° Sh.A red 80° Sh.A transparent, FDA 80° Sh.A sky-blue, FDA 85° Sh.A green 90° Sh.A white Profiles 6x4 / 8x5 / 10x6 / 13x8 / 17x11 / 22x14 Smooth or notched

Hollow core belts for nipple connections when quick and easy installation is needed. Standard stock program: 75° Sh.A red, smooth 80° Sh.A sky-blue, smooth, FDA 85° Sh.A green, smooth Available diameters: 4.8mm - 15mm Available lengths: starting from 110mm Available hardness: 75° Sh.A – 85° Sh.D Temperature resistance: -30°C - +70°C Coefficient of friction: 0.3µ - 0.7µ

We have a complete range of polyurethane round belts for conveying and power transmission applications. PU round belts, extruded in open lengths, are homogeneous round profiles that can be welded for use as high-quality power transmission and conveying elements. Our stock mainly comprises solid profiles with a smooth or slightly roughened surface and hollow profiles for nipple connections. Several types have FDA/USDA approval and comply with EU Directive 2007/19/EC. Although we generally produce in open lengths, we can also produce all belts according to your specifications. Our round belts convey a wide range of products such as foodstuffs, glass, roof tiles, PC boards and many more. The standard range of round belts is rounded off with aramid, polyester or glass-fiber reinforcements. If an appropriate quantity is purchased, we also produce special types with PES or aramid reinforcements.

Polyester felt belt antistatic

Polyester felt belt antistatic

Polyester felt belt antistatic

PVC conveyor belt 2-ply black with felt top

Silicone conveyor belt 2-ply white

Silicone conveyor belt 1-ply light blue

Overview to the technical datas of KEIPER conveyor belt product range RAPID

PU conveyor belt 2-ply white, structure

PU conveyor belt 2-ply light blue

PU conveyor belt 2-ply green

PU conveyor belt 2-ply white

PU conveyor belt 2-ply light blue, fabric

PU conveyor belt 2-ply white, fabric

PU conveyor belt 1-ply light blue, structure

PU conveyor belt 1-ply light blue

PU conveyor belt 1-ply white

PU conveyor belt 1-ply white

PU conveyor belt 1-ply white