Controlled climate - Import export

Air/water heat exchanger in TS 8 baying system, useful cooling output 10 kW. Air/water heat exchangers in TS 8 baying system, to fit 600 or 800 mm deep and 2000 mm high TS 8 enclosures. Air outlet either with 5 kW on each side or 10 kW on one side only. Flexible water connection options on the top or bottom of the unit. SK Liquid Cooling Package, Air/water heat exchanger in TS 8 baying system, 9.5 kW, 230 V, 1~, 50/60 Hz, Water-carrying parts: copper/brass , WHD: 300 x 2000 x 600 mm

Sheet steel section doors for the installation of climate control module types SK 3307.7XX to 3310.7XX. Sheet steel section doors for the installation of climate control module types SK 3307.7XX to 3310.7XX. SK modular climate control concept, Section doors, for TS8 WH: 600 x 1800 mm

Complete fan unit for tool-free mounting on surfaces. Air throughput from 20 - 900 m³/h, standard protection category IP 54. SK fan and filter units TopTherm, 20/25 m³/h, 230 V, 1~, 50/60 Hz, WHD: 116.5 x 116.5 x 16 mm

TS IT, sealed, for direct enclosure-specific climate control. 482.6 mm (19") interior installation with depth-variable 482.6 mm (19") mounting angles for a load capacity of up to 1,500 kg, available in a range of size variants. TS IT, 19" mounting angles, glazed door, WHD: 600 x 2000 x 1000 mm, 42 U

Enclosure heaters to regulate relative humidity, prevent temperatures from dropping below the dew point and stop condensation forming inside the enclosure. This prevents consequential damage associated with corrosion or electrical short circuits. SK enclosure heater, without fan, 8-10 W, 110-240 V, 1~, 50/60 Hz, WHD: 45 x 120 x 46 mm

Cooling via high-performance compact impellers. The LCP draws in the air at the sides at the rear of the server enclosures and blows the cooled air back into the front part of the server enclosure at the sides. Maximum energy efficiency due to EC fan technology and IT-based control Minimal pressure loss at the air end, which in turn minimises the power consumption of the fans Control of the server inlet temperature With redundant temperature sensor integrated at the air end as standard Optimum adaptability due to dynamic, continuous control of the cold water volume flow By using high water inlet temperatures, the proportion of indirect free cooling is increased, which in turn reduces operating costs Targeted cooling output due to modular fan units Fan modules configurable as n+1 redundancy Standard 3-phase connection for electrical redundancy The separation of cooling and enclosure prevents the ingress of water into the server enclosure

R410A is the favored refrigerant used in private and business climate control systems in the United States, Canada, Europe, and Japan. It was created as a harmless ecosystem swap for R22, which was considered a supporter of ozone-depleting substances. Most present-day forced air systems to decide on R410A refrigerant, which permits frameworks to work and higher tensions versus R22. For installers and HVAC experts, most will require particular apparatuses and gear to work with R410A, for instance, connectors and fittings, for vacuum siphons. Starting in 2010, R22 isn’t allowed in the United States or Canada and has been supplanted by R410A refrigerant, a more proficient and eco-accommodating refrigerant. R-410A is a without chlorine refrigerant that meets the U.S. EPA’s freshest, most strict ecological rules. R-410A was created as an option in contrast to R-22 (Freon), which will be deliberately eliminated throughout the next few years in light of global natural worries.

Prefabex portable kiosks and cabin security can be customized with many different options and layouts. We will work with you to design a cabin unit that will best fit your individual needs. Our modular kiosks and cabins are ideal for parking booths or for an attendant booth or building sites or check stations. They are climate controlled and insulated to shelter your employees from any severe weather. Also referred to as portable security cabins, portable security booths, a portable shack building, portable office building, portable kiosks, guard booths, guardhouse, security huts, panel cabin, and guard posts. Guard buildings serve as points of entry, observation towers, parking control, building sites, perimeter stations, checkpoints, military structures, and so on. Overall, guard buildings provide a safe shelter for those on the grounds of your institution.

The TTK 122 E allows for easy transport of bar handles and steering wheels on both sides. The operating comfort is not affected adversely by the solid design. Membrane keys that the operating panel is equipped with is easy to clean and the desired air humidity for example, can be a direct input through the digital display. The selection switches with only one less value are energy saving giving an advantage that is practical in comparison to other dehumidifiers that are analog controlled. The TTK 122 E has a display that can show the dominant air temperature during the function of climate control. It works with full automatic performance as an alternative to the TTK 120 E. For accelerated textile drying it disposes a super-dry functionality. When it comes to wet laundry, carpets, or cloth it is especially practical for faster dehumidifying.

Hepa Filter Box is designed to be used in any space requiring high-level climate control, such as clean rooms, operating rooms, and sterile environments.

Adiabatic humidifiers for humidity supply and air cooling - ADIABATIC COOL Humidifiers or adiabatic modules have become popular for use in conjunction with climate control heat exchangers, UTAs or any other system where it is necessary to increase humidity and cool an air flow. Standard airflows range from 2,100 m3/h to 30,000 m3 / h but we can manufacture equipment with higher capacity. Its operation is completely ecological since it does not use any type of refrigerant gas since the air is cooled by passing the outside air through a panel moistened with water that cools the air and increases its humidity, its electricity consumption is also 80 % lower than other conventional air conditioning systems.

Active climate control of individual enclosures for heat losses of up to 3 kW. Target temperature-controlled control of the server inlet temperature. SK Roof-mounted cooling unit, For cooling IT equipment, Control of the server air infeed temperature, WHD: 597x417x895 mm, 230 V, 1~, 50 Hz

In dusty environments, we recommend the use of filter mats. This makes the units easier to clean. The filter will need to be replaced at regular intervals, depending on the level of contamination. Rittal cooling units are low-maintenance and are supplied without filter mats. Filter mats may be used for extreme conditions. SK Filter mat, for wall-mounted cooling units SK 3255, WHD: 350x245x10 mm

VX IT network/server enclosure, vented, for room climate control. 482.6 mm (19") interior installation with depth-variable 482.6 mm (19") mounting angles in the standard version, for a load capacity of up to 1,500 kg, available in a range of size variants.

High Polyphenol Extra Virgin Olive Oil First Harvest begins in early September, when the olives are still very green. Our produce is brought to our factory where it rests and cools in a climate controlled storage until it is pressed and the oil is produced. Due to this care and attention to detail we are able to trap the essence of the fruit in the oil, resulting in an exceptional oil that is high in Polyphenols. These Polyphenols are known as strong antioxidant compounds that may be helpful in keeping you healthy and protect against various diseases. According to the EU health claim, "olive oil polyphenols contribute to the protection of blood lipids from oxidative stress" if 20mg of high polyphenol containing extra virgin olive oil is consumed per day. For the purpose of enlisting these advantageous effects of Polyphenols, we have given every care we can to produce our “Drop of Life High Polyphenol Extra Virgin Olive Oil”. Award Wining Olive Oil, Awarded Olive Olive Oil

You can also find products made by Enbi Plastics in the cars of for instance Mercedes, BMW and Audi! One example of this is the lift bar, which connects car windows to their electronic controls. In the past, they drilled holes in the glass to do this, but that is not possible with today’s layered, safer glass. That is why a dimensionally stable part that could form a solid connection between the window and the technology was needed. Our client glues the lift bars to the car windows using putty. Enbi Plastics prepares the part: we use an activator and primer. This is done in a fully climate controlled room. After production, we conduct rapid aging tests: By applying water to the parts and exposing them to a certain temperature for five days, we can check if the putty continues to stick. That way, we ensure optimal reliability. We continually make this product, constantly maintaining the right stock levels for the client.

Interact with your digital instrument clusters for a full ergonomic simulation TechViz I3 option is easy to use and enables to visualize human-machine interaction scenarios, combining non-3D elements within a 3D model. Interact Instantly with your Digital Instrument Clusters, Digital Infotainment, Navigation Systems, Digital Speedometer, Digital Electronic Control Unit, Digital climate control or any kind of HMI in your product design. The aim is to emulate a touch-sensitive interaction with HMI in an immersive environment. These HMI are independent 2D applications integrated in the mock-up. For exemple in a virtual car, user’s fingers can be tracked thanks to a thimble for interaction with the virtual GPS interface. The collision between the interaction tool and the user interface emulates a computer mouse click. It enables to create various scenarios such as testing hand accessibility to the main commands from the driver seat of a car.

TOP C - for the first rays of summer — bring cool air into your warehouse on hot days with the TOP C — offer cooling as an option, even when your client only asks for hall heating — up to now a project-specific solution – the all-rounder now becomes a standard product Multifunctional The demand for cooling buildings is also continuing to increase in industrial climate control. In the system with chiller/heat pumps, the TOP C offers a simple solution for both: removing heating or cooling loads. Continuously variable control Control of TOP C is continuously variable with the cost-effective EC fans to supply the precise output actually required. This also means unnecessary sound emissions are avoided. Fast-reacting The most flexible climate control solution for storage, production, and sales. The fan support ensures fast-reacting heating and cooling of the hall.

The basic equipment of the NSBox-123 includes: wall mounting brackets, mounting plate with DIN-rails, terminal blocks, a two-pole circuit breaker, an electrical grounding bar, a fan with a thermostat, a set of cable glands. These modules can also be included in the assembly: -Unmanaged Industrial switch: uplink 1 TP/1G, 4 ports TP/1G PoE 30W; -Power Supply 48VDC-100W; UPS CR-48VDC-155VA with mounting kit for batteries 7Ah x4; -Climatic control system inside enclosure: thermostats, fan, Fan Heater; -Lightning and surge protection for Ethernet PoE ports and power circuits 220VAC; -NSBon-47: Active to Passive PoE Converter, Input 802.3af/at/bt PoE | Output 24V Passive PoE; -NSBon-61: Industrial 4G LTE Cellular Router: 1 WAN, 1 LAN, 1 RS232, DI/DO, 1 micro SIM Slot.

The NSBox access Nodes are devised for the deployment of protected outdoor Video Surveillance systems. The Nodes provide trouble proof operation of connected video cameras with a secure power supply, reliable data transmission, and protection of sensitive equipment from surges caused by lightning and power fluctuations. It is a perfect technology solution for time and money saving in any outdoor Video Surveillance projects for a large-scale area ranging from construction sites, parking lots, hotels, parks, shopping mall, sports facilities, airports, railways, bridges, and highways. The basic equipment of the NSBox-4042e includes: wall mounting brackets, mounting plate with DIN-rails, terminal blocks, a two-pole circuit breaker, an electrical grounding bar, a fan with a thermostat, a set of cable glands. These modules can also be included in the assembly: Managed Industrial 4 ports PoE Switch with the Power Supply 48VDC-150W; Climatic control system inside cabinet: thermostats

Electrical and electronic equipment mounted inside a cabinet generate heat that raises the temperature internal air. Over time, the ever increasing heat can cause sensitive devices to malfunctions. Additionally, heat accumulation can cause circuit breakers to trip which can result in system shut down. Fan filter units are used for enclosure climate control to dissipate heat from within the enclosure to prevent the premature failure of the equipment inside it. It helps to increase an operational reliability and a service life for electrical and electronic systems. Filter fans will cool enclosures to a level slightly above the ambient temperature outside the cabinet. To cool enclosure contents, the fans draw filtered ambient air into the cabinet. At the same time, the heated air within the cabinet is blown out an exhaust. The exhaust is also filtered which creates airflow resistance and a slightly higher pressure inside the enclosure.

NSBon-36 is used to protect user's equipment installed into NSBox Access Node or NSB/NSE/NSP electrical enclosure with climatic control system inside from damage that can be caused by system start in low temperature conditions. The idea is not to apply power to the equipment before temperature inside the cabinet reaches acceptable level. I.e. if the temperature is lower than required by protected device's datasheet and power is applied to the entire Access node or Enclosure, the heater starts first and only after temperature rises above level set by user power is applied to the protected device. NSBon-36 consists of normally open thermostat with adjustable threshold, a contactor that is used to apply power to the user's equipment under protection and terminal blocks.

NSGate electrical enclosures are designed to install outdoor Video Surveillance Systems and full protection communication equipment against both harsh environments and acts of vandalism. It is a completed product for installation and operation in any climates. The NSB-6060 enclosures are made of powder-coated sheet steel and have a protection category of IP66 / NEMA4. The mounting plate material is zinc-plated sheet steel 2 mm. The enclosure is corrosion resistant for long service life. The sizes of NSB-6060 enclosures are 600 x 600 x 210 mm. In the basic equipment includes wall mounting brackets, a mounting plate with DIN rails for customer equipment, terminal blocks, a two-pole circuit breaker, an electrical grounding bar, a fan with a thermostat, set of sealed cable glands for electrical and optical cables, one lock. These modules can also be included in the assembly: Climatic control system inside enclosure: thermostats, Fan Heater, Thermoelectric Cooler/ Assembly;

NSGate electrical enclosures are designed to install outdoor Video Surveillance Systems and full protection communication equipment against both harsh environments and acts of vandalism. It is a completed product for installation and operation in any climates. The NSB-4040 enclosures are made of powder-coated sheet steel and have a protection category of IP66 / NEMA4. The mounting plate material is zinc-plated sheet steel 2 mm. The enclosure is corrosion resistant for long service life. The sizes of NSB-4040 enclosures are 400 x 400 x 230 mm. In the basic equipment includes wall mounting brackets, a mounting plate with DIN rails for customer equipment, terminal blocks, a two-pole circuit breaker, an electrical grounding bar, a fan with a thermostat, set of sealed cable glands for electrical and optical cables, one lock. These modules can also be included in the assembly: Climatic control system inside enclosure: thermostats, Fan Heater, Thermoelectric Cooler/ Assembly;

NSGate electrical enclosures are designed to install outdoor Video Surveillance Systems and full protection communication equipment against both harsh environments and acts of vandalism. It is a completed product for installation and operation in any climates. The NSB-3860 enclosures are made of powder-coated sheet steel and have a protection category of IP66 / NEMA4. The mounting plate material is zinc-plated sheet steel 2 mm. The enclosure is corrosion resistant for long service life. The sizes of NSB-3860 enclosures are 380 x 600 x 210 mm. In the basic equipment includes wall mounting brackets, a mounting plate with DIN rails for customer equipment, terminal blocks, a two-pole circuit breaker, an electrical grounding bar, a fan with a thermostat, set of sealed cable glands for electrical and optical cables, one lock. These modules can also be included in the assembly: Climatic control system inside enclosure: thermostats, Fan Heater, Thermoelectric Cooler/ Assembly;

NSGate electrical enclosures are designed to install outdoor Video Surveillance Systems and full protection communication equipment against both harsh environments and acts of vandalism. It is a completed product for installation and operation in any climates. The NSB-3838 enclosures are made of powder-coated sheet steel and have a protection category of IP66 / NEMA4. The mounting plate material is zinc-plated sheet steel 2 mm. The enclosure is corrosion resistant for long service life. The sizes of NSB-3838 enclosures are 380 x 380 x 210 mm. In the basic equipment includes wall mounting brackets, a mounting plate with DIN rails for customer equipment, terminal blocks, a two-pole circuit breaker, an electrical grounding bar, a fan with a thermostat, set of sealed cable glands for electrical and optical cables, one lock. These modules can also be included in the assembly: Climatic control system inside enclosure: thermostats, Fan Heater, Thermoelectric Cooler/ Assembly;

NSGate electrical enclosures are designed to install outdoor Video Surveillance Systems and full protection communication equipment against both harsh environments and acts of vandalism. It is a completed product for installation and operation in any climates. The NSB-3040 enclosures are made of powder-coated sheet steel and have a protection category of IP66 / NEMA4. The mounting plate material is zinc-plated sheet steel 2 mm. The enclosure is corrosion resistant for long service life. The sizes of NSB-3040 enclosures are 300 x 400 x 210 mm. In the basic equipment includes wall mounting brackets, a mounting plate with DIN rails for customer equipment, terminal blocks, a two-pole circuit breaker, an electrical grounding bar, a fan with a thermostat, set of sealed cable glands for electrical and optical cables, one lock. These modules can also be included in the assembly: Climatic control system inside enclosure: thermostats, Fan Heater, Thermoelectric Cooler/ Assembly;

NSGate electrical enclosures are designed to install outdoor Video Surveillance Systems and full protection communication equipment against both harsh environments and acts of vandalism. It is a completed product for installation and operation in any climates. The NSB-3030 enclosures are made of powder-coated sheet steel and have a protection category of IP66 / NEMA4. The mounting plate material is zinc-plated sheet steel 2 mm. The enclosure is corrosion resistant for long service life. The sizes of NSB-3030 enclosures are 300 x 300 x 210 mm. In the basic equipment includes wall mounting brackets, a mounting plate with DIN rails for customer equipment, terminal blocks, a two-pole circuit breaker, an electrical grounding bar, a fan with a thermostat, set of sealed cable glands for electrical and optical cables, one lock. These modules can also be included in the assembly: Climatic control system inside enclosure: thermostats, Fan Heater, Thermoelectric Cooler/ Assembly;