Container vessel - Import export

Pharmaceutical and biotech apparatuses are calculated and manufactured according to your requirements. Stainless steel and special materials are used in the production. After that, the products are grinded, electropolished and tested using non-destructive testing methods, such as ferrite measurements, used for the determination of the ferrite content, or by using the riboflavin test to measure total discharge and CIP/SIP capability. All materials, methods and processes used have been documented in full in detailed QA documents and can be tracked at any time. You can depend on KASAG.

Pressure vessels, reactors, Pharmaceutical and biotech pressure vessles, Process containers, storage tanks, Modules, components, plants, High-pressure apparatuses,Heat exchangers, vaporisers, condensers, Cryo pressure vessels, technologies Nuclear technology, Vacuum chambers, vacuum apparatuses, Columns, according to PED (EN13445 / AD-2000), ASME (U-Stamp), China Stamp (A1), TP TC 032/2013 (EAC) Pharmaceutical and biotech apparatuses are calculated and manufactured according to your requirements. Stainless steel and special materials are used in the production. After that, the products are grinded, electropolished and tested using non-destructive testing methods, such as ferrite measurements, used for the determination of the ferrite content, or by using the riboflavin test to measure total discharge and CIP/SIP capability. All materials, methods and processes used have been documented in full in detailed QA documents and can be tracked at any time. You can depend on KASAG.

Pressure vessels/containers and reactors must meet the highest quality requirements. The pressurized objects are designed at KASAG according to the relevant regulations and subsequently produced, with great enthusiasm, using the most modern technology. Stainless steel and special materials, such as duplex and nickel-based alloys (Hastelloy, Inconel) are processed. All our production experts have the mandatory certificates, and have mastered the welding process MIG, MAG, TIG, Plasma and Orbital and work solely with certified welding consumables. The pressure vessles and chemical reactors are finally polished, pickled, passivated and tested using non-destructive test methods. KASAG products meet all your standards.

You now operate in an environment where production safety and perfect product quality have top-most priority. You must be able to place unlimited trust in your partners and to demand everything you need. With KASAG as your partner in design, engineering and production of apparatuses, pressure vessels, pressure containers, reactors, heat exchangers, modules and plants for global use, you are on the safe side. Core competences of KASAG: Design, calculation, construction according to diverse regulations, pressure equipment approvals, such as PED (EN13445, AD-2000), ASME (U-Stamp), China Stamp (A1), TP TC 032/2013 (EAC) Manufacturing permits and knowhow for the delivery of pressurised containers, apparatuses, plants to almost all the countries in the world. Welding of stainless steel and special materials such as Hastelloy, Inconel, Duplex Comprehensive spectrum of non-destructive tests Surfaces that meet the highest standards

We offer an extensive range of drum and barrel heaters and container heaters: Heating jackets, silicone drum heaters, base drum heaters and insulating but unheated drum jackets and lids for heating and insulating plastic and metal drums respectively containers. According to the destined application we use polyester, silicone, teflon and glass fibre for our drum heaters and container heaters. Some of the materials are coated and multi-layered resp. combined. Our drum heaters can be used individually and in combination and can be ordered and delivered online (shop.freek.de) for all standard drum sizes (25 / 50 / 105 / 200 litres). Of course, we also manufacture our heating jackets, heating sleeves, base heaters and insulating bonnets individually to fit your container and your special application. HC - Heating cabinets If you heat several drums or containers together or need a container heater for the ATEX area, the heating cabinets from our partner Amarc are the right choice.

You now operate in an environment where production safety and perfect product quality have top-most priority. You must be able to place unlimited trust in your partners and to demand everything you need. With KASAG as your partner in design, engineering and production of apparatuses, pressure vessels, pressure containers, reactors, heat exchangers, modules and plants for global use, you are on the safe side. Core competences of KASAG: Design, calculation, construction according to diverse regulations, pressure equipment approvals, such as PED (EN13445, AD-2000), ASME (U-Stamp), China Stamp (A1), TP TC 032/2013 (EAC) Manufacturing permits and knowhow for the delivery of pressurised containers, apparatuses, plants to almost all the countries in the world. Welding of stainless steel and special materials such as Hastelloy, Inconel, Duplex Comprehensive spectrum of non-destructive tests Surfaces that meet the highest standards

Our specialists have vast knowledge and many years of experience in non-destructive testing (NDT) of welding seams, welding constructions, pressure vessels, containers, equipment and plants. We use and offer the following testing procedures for that purpose: X-rays RT Dye penetrant testing PT Visual inspection VT Material testing/ Positive Material Identification PMI Helium leakage testing LT Riboflavin test Pressure tests of up to max. 1000 bar Surface roughness testing Ra/Rz Ferrit measurement Fe Wall thickness measurement Video endoscopy Pressure-loss test (liquid) With KASAG, you remain on the safe side.

Are you using pressure vessels, apparatuses, pressure containers that are subject to the inspection cycles of the regulatory authorities? Would you like to have our advance expertise on the technical updates? Do you have problems with the cleaning of apparatuses, containers? Are you unsure about the technical details of the bought-in containers, apparatuses, and would you like them checked? We are experts in apparatus and pressure vessel construction and have comprehensive knowhow of the pressure equipment directive. For control, testing KASAG offers a wide range of non-destructive testing methods. Please get in touch with us, and our KASAG experts will be glad to offer you expertise.

Walnuts occupy the first place among all nuts in terms of the number of EFAs, i.e. essential fatty acids. Apparently, 3 nuts already cover the daily demand for omega-3 fatty acids. They also contain L-arginine, a substance that affects the expansion of blood vessels. Italian presents contain large amounts of antioxidants, they are a rich source of valuable protein, fiber and many vitamins and minerals. Badings indicate that regular consumption of walnuts can be helpful in preventing the development of disease hearts. Polyunsaturated fatty acids and vegetable sterols contained in nuts have a beneficial effect on the cardiovascular system - they reduce LDL (bad cholesterol), they have anti -inflammatory, reduce blood viscosity and a tendency to form blood clots. In 100 GP Energy Average 2681KJ/692kcal - 34%RWS*Fat 60.3g - 86%Including saturated fatty acids 6.56g - 33%carbohydrates 18g - 7%including sugars 2.2g - 2%fiber 6.5GBiAłko 16g - 32 %Salt 0.

It is an HFC Azeotropic blend of three refrigerants namely R 143a (52%), R125 (44%) and R 134a (4%)1. Fastcool 404A blends are suitable for refrigeration applications like food display cases, deep freezers, storage cases, cold storage rooms, ice machines, food processing units, industrial refrigeration and transport refrigeration like refrigerated trucks, refrigerated containers, vessels and trawler cold rooms12.Fastcool R 404a is an HFC Azeotropic blend and for this reason, it is suggested to use the liquid form of refrigerant for charging the system to avoid damage.Fastcool 404a requires a POLYESTER (POE) Lubricant to ensure complete miscibility between oil and refrigerant. Miscibility is important for oil return to the compressor especially in a large system with long runs of piping. POE Oil absorbs moisture quickly when it is exposed to the atmosphere. Therefore, it is important to handle the equipment very carefully and avoid prolonged exposure to air.

Schizandra chinensis, also called WuWeiZi is the herb of the five flavours. The fruit is a slightly sour tasting berry, that also contains parts of sweet, hot and mild aroma. That wide gustatory spectrum is traced back to a complex of rare flavonoids and a unique ethereal oil. In the Asian area schizandra is already listed for centuries as dietary supplement on the daily menu. Pomegranate particularly contains large quantities of secondary plant compounds such as flavonoids, tannins und ellagic acid. Vitamins B6 and B12 as well as folic acid supplement both plant extracts perfectly: folic acid contributes towards maintenance of a normal homocysteine level. Vitamins B6 and B12 make a contribution towards the formation of red blood cells, which ensure that oxygen is transported in the vessels. Each capsule contains 300mg Schizandra extract (10:1) corresponding to 3000mg and 200mg Schizandra powder pomegranate extract with minimum 40% ellagic acid.

Standard: LR, ABS, BV, DNV, GL, RINA, ASTM A 131, RMRS As a trusted supplier for the shipbuilding sector for decades, NLMK Europe – Plate has a deep knowledge of the specific needs of the shipyard companies. We produce our steels in accordance with the relevant national and international standards... Applications : Container or specialized vessels, cruisers or ferries, yachts, military ships, submarines, etc. Standard LR, BV ABS ASTM A 131 DNV.GL RINA RMRS Grades Grade A, B, D, E Grade A(H)32, D(H)32, E(H)32 Grade A(H)36, D(H)36, E(H)36 Grade A(H)40, D(H)40, E(H)40 Thickness (mm) 3-120 3-150 3-150 5-60 Delivery conditions AR, N, TM, NR

Heating technology with a future The calculation is simple, the technology successful. Efficient surface drying is achieved with biomass in Rippert plants. Together with the Hargassner company from Austria, a specialist for heating with biomass, and the proven Rippert plant know-how, the technology is now marketable and has gone into production. The demanding drying characteristics in a powder-coating plant are compatible with the process and work perfectly. A future-orientated heating technology with considerable economic and ecological benefits – the experts are unanimous in that. Wood pellets or wood chips are the inexpensive energy suppliers. They are valuable waste products that result from the processing of domestic timbers. Heating with wood chips – without intermediate heat transfer media such as thermal oil • Environmentally friendly and CO2-neutral • fully automatic boiler cleaning and ash discharge Maximum financial saving potentials are realised with this energy carrier. Wood chips, chopped to a transportable size and dried by the supplier, are stored in the storeroom near the plant. It can be located on the same level or lower. A tried-and tested transport system consisting of a floor agitator with springs and discharge auger carries the wood chips reliably into the plant. Here it acts as a fuel with maximum convenience. If the calorific value equivalents are examined, we see that 1,000 litres of fuel oil is equivalent to 12 m³ of wood chips. The ratio is the same for 1,000 m³ of natural gas. Heating with wood pellets - without intermediate heat transfer media such as thermal oil Wood pellets are true energy bundles. They consist of natural wood and are made by compressing sawdust, which is produced in large quantities every day in the industry. As a biomass they are the alternative to wood chips and are just as advantageous from an economical point of view. Pellets have the smallest volume and are conveyed dust-free and without odours from storage containers to a storage vessel next to the plant. They are transported into the combustion chamber via a rotary vane feeder and feed auger. For comparison: 1,000 l fuel oil = 2 t pellets 1,000 m³ natural gas = 2 t pellets 1,000 l liquefied gas = 1.32 t pellets Advantages • Reduction in energy costs Heating cost comparison (reference = 1,000 l fuel oil)

100 % virgin PTFE, modified and filled with Barium sulfate Characteristics Protected against cold flow Excellent recovery Excellent chemical resistance in caustic applications Reduced leakage rates compared to other filled PTFE gaskets under the same gasket stress. Technical parameters pH 0 - 14 Temperature: t = -180 … +230 °C, short term up to 260 °C Pressure: p = 55 bar Article code / Thickness WHITE 08 / 0.8 mm WHITE 10 / 1.0 mm WHITE 15 / 1.5 mm WHITE 20 / 2.0 mm WHITE 30 / 3.0 mm Main application Steel-, Glass-, Ceramic-, glass lined or plastic flanges on pipework Vessel Container Reactors Suitable for Chemical and Petrochemical industry Approvals TA-Luft Form of delivery Gasket sheet size of 1,500 x 1,500 mm in thickness of 0.8/1.0/1.5/2.0/3.0 mm or cut gaskets according to drawing or EN and international Standards, special dimensions on request.

Modified PTFE reinforced with special silica filler Characteristics Protected against cold flow Excellent recovery Very good in applications with varying temperatures Reduced leakage rates compared to other filled PTFE gaskets under the same gasket stress. Technical parameters pH 0 - 14 Temperature: t = -180 … +230 °C, short term up to 260 °C Pressure: p = 55 bar Article code / Thickness FAWN 05 / 0.5 mm FAWN 10 / 1.0 mm FAWN 15 / 1.5 mm FAWN 20 / 2.0 mm FAWN 30 / 3.0 mm Main application Steel or other metal flanges on pipework Vessel Container Reactors in higher temperature applications. Suitable for Chemical and Petrochemical industry Approvals TA-Luft Form of delivery Gasket sheet size of 1,500 x 1,500 mm in thickness of 0.5 / 1.0 / 1.5 / 2.0 / 3.0 mm or cut gaskets according to drawing, or EN and international Standards, special dimensions on request.

Static, Sintered PTFE Sheet Gaskets Characteristics Microcellular structured PTFE filled with hollow glass microspheres High sealability even at low gasket stress Minimized cold flow Very good recovery High compressibility and adaptability even at slightly damaged flanges Technical parameters Temperature: t = -180 … +230 °C Pressure: p = 55 bar Article code / Thickness BLUE 05 / 0.5 mm BLUE 08 / 0.8 mm BLUE 10 / 1.0 mm BLUE 15 / 1.5 mm BLUE 20 / 2.0 mm BLUE 30 / 3.0 mm Main application Steel-, Glass-, Ceramic-, glass lined or plastic flanges on pipework Vessel Container Reactors Universally on all tension sensitive equipment flanges. Suitable for Chemical industry Pharmaceutical industry Food industry Approvals DVGW TA Luft FDA EG 1935:2004, EU 10/2011 FDA Variant D3.1 Modified PTFE: Reduced deformation under pressure, better resilience under varying pressure, reduced thermal expansion coefficient (approx. 50 %) D3.2 Glas: Improved compression strength due to glas fiber...

ADROP is domestic water ioniser with flat electrodes, featuring a unique water silvering function. A certified and patented device produces 2.7 litres of ionised alkaline water and 0.3 litres of ionised acidic water. the alkaline water ioniser is composed of a lower container, a removable vessel with a filter and a cover that can easily be assembled according to the instruction manual provided. The ioniser is operated using the control unit on the cover. Discove more details please visit our website www.nutratrends.uk

EMA intermediate bulk container (IBC) is a large vessel that is used to store fluid and bulk materials or transport them. IBC’s can be manufactured from many different materials such as stainless steel, aluminum, mild steel, and exotic alloys. EMA designes manufactures hundreds of intermediate bulk containers and bins (IBC's) per year. EMA 350 gallon (1325 liter) Intermediate Bulk Container is one of EMA’s most popular IBC’s. EMA's advanced manufacturing technology provides a one-piece body, 10-gauge (.135”/3.4 mm) stainless steel construction and single-seam welding, for greater strength and durability. The features either a center drain or side drain discharge outlet to meet your individual delivery system needs. All tanks are manufactured with sloped bottoms and 2” (5.08 cm) ball valve discharge and safety cap.

This electric pan is designed for preparing different meals and dishes. Food is thermally processed – by frying in oil or stewing with water. The pan may be used in large-scale kitchens, factory canteens or buffets. The unit is made of food safe stainless steel. The upper part of the appliance contains a cooking vessel whose cover is attached to the support frame and placed on slide bearings. The cooking vessel may be manually tilted using a turning wheel on the right side of the appliance. The pan is fitted with a working thermostat under the front cover in the electric box fastened to the support frame. On the back of the support frame is a proximity switch which disconnects the control circuit when the vessel is tilted. The electric pan is fitted with heater body located on the pressure plate under the cooking vessel, with electrical water supply into boiling vessel and with adjustable feet to accommodate uneven floors.

Medium size aromatic candle comes in copper containers. Soy wax may come with herbal fragrances or artificial fragrances. Low minimums and speedy delivery are available. The candles in stock can be delivered within 72 hours. These low cost candle jars made by quality material. Brand logo engraving or private label option are also available. The rose-gold copper containers come in many designs and all the designs are created according European Standards. Free shipping is offered to high quantity orders. Safe candle containers. Candle making supplies. Candle tins. Custom candle containers. Candle wicks. Copper candle container. Brass candle jar. Rose gold candle container. Golden container. Candle vessel. High quality candle designs. High end candle jars wholesale. Tumbler candle jars. Curved candle container. Black candle tumblers wholesale. Frosted candle jars with lids wholesale. Business to business candles. B2B candles.

Large aromatic candle comes in premium quality rose-gold copper containers. Several scents and soy wax options are available. Quality is controlled properly and all the candles comes with private labels. Low minimums and speedy delivery are available. These low cost candle jars made by quality material. Brand logo engraving or private label option are also available. The rose-gold copper containers come in many designs and all the designs are created according European Standards. Free shipping is offered for high quantity orders. Safe candle containers. Candle making supplies. Candle tins. Custom candle containers. Candle wicks. Copper candle container. Brass candle jar. Rose gold candle container. Golden container. Candle vessel. High quality candle designs. High end candle jars wholesale. Tumbler candle jars. Curved candle container. Black candle tumblers wholesale. Frosted candle jars with lids wholesale. Business to business candles. B2B candles.

3.2 Hoppers for your drums For transferring product received in shipping containers to your process vessel. Müller's well-established range of hoppers; the rim of each one can be adapted to mate with your container type. Telefon: +49 (0) 76 23 / 9 69 - 0 Fax: +49 (0) 76 23 / 9 69 - 69

2.8 Special containers Special containers / pressure vessels The individualists: designed for individual needs We build special containers with over 20 various diameters from Ø 120 mm to Ø 1200 mm made of stainless steel with different bottom- and cover shapes, which exactly meet your requirements. Caused by the modular method of construction of our special containers, even custom-made items according to your wishes are possible and also cost-efficient to realize. We would be very pleased to submit you an offer. Therefore please send us a sketch of your desired special container. Phone: +49 (0) 76 23 / 9 69 - 0 Fax: +49 (0) 76 23 / 9 69 - 69