Connection head - Import export

Not Known Details About Refrigeration Gas For Refrigerator and Fridge The top product would be the one which has the highest excellent and lowest price tag. The most effective evaluate is a single that gives detailed information regarding the products, its functions, and its Added benefits. The best quality may be the one that provides substantial-quality buyer assessments, for instance These from on the web shops or professional reviewers. Connected Opinions r22 vs r410a Head towards the recycling center. Take the one-pound propane cylinder to the appropriate recycling Middle. In a few locations locating an acceptable disposal system for a single-pound propane bottles is usually a problem. There are methods to recycle them for these a single-pound propane cylinders for your steel they have. As there isn’t any condensation and evaporation supposed inside a gasoline cycle

8.8 & 10.9 quality very durable decromat 500 armored bolts were used to connect the sheets and increase the durability of the silos. Special insulation has been applied to the silo sheets and ceiling cone head connections to ensure air and water tightness.

Screw-in Tubular Heaters are the standard solution for all heating processes with liquids or gas. The heater is installed in a tank or a tube system by the G1½" screw fitting. The IP54 connection head, fitting and tubular heater consists of stainless steel. The tube sheath material 1.4529 is resistant to sulphite, phosphors and hydrochloride media.

connecting screw M6 - short type head with cross recess and suitable for caps (for window industry)

connecting screw M6 - long type head wih cross recess and suitable for caps (for window industry)

P-131-C26 - hydraulic crimping head, 130 kN, CU300mm² for exchangeable dies series "130-C", "13" for connecting with an hydraulic pump working pressure: 700 bar (10.000 PSI) opening jaw: 26 mm Characteristics Single acting hydraulic head for connecting at a hydraulic pump Quick coupler system CEJN series 115 with dust protection cap for changeable compression dies NEW! The P-131 series with mechanical stop. Mo demage by using without dies!

The MBS hydraulic cylinders of the MZR-1005 series are synchronized cylinders with spring return for use as actuating and control cylinders. The spring characteristic is freely selectable according to customer specifications. Also hub and piston rod protrusion are variable. The cylinder connection takes place via a head flange attachment and a threaded attachment on the piston rod. For flexible use there are connecting pieces for pipe fittings to BSPP ISO 1179-2 and venting connections on both sides. The cylinders are prepared for use with position sensor and position monitoring. With the exception of the piston rod and the centering surfaces, the entire cylinder is protected against corrosion with a black primer. On request alternative surface treatments are possible. The surface of the piston rod is hard chromed, ground and polished. The cylinders are suitable for hydraulic fluids of the types H, HL and HLP according to DIN 51525-1. If you have any questions about areas of...

The MBS hydraulic cylinders of the MZR-1004 series are synchronized cylinders for use as actuating and control cylinders. All cylinders work with low friction and run stick-slip-free. The connection is made via a head flange attachment and a threaded attachment on the piston rod. For flexible use, fittings for pipe fittings according to BSPP ISO 1179-2 and venting connections are available on both sides. Lift and piston rod protrusion are also variable selectable. Our cylinders are prepared for use with position sensor and position monitoring. With the exception of the piston rod and the centering surfaces, the entire cylinder is protected against corrosion with a black primer. On request alternative surface treatments are possible. The surface of the piston rod is hard chromed, ground and polished. The cylinders are suitable for hydraulic fluids of the types H, HL and HLP according to DIN 51525-1. If you have any questions about areas of application or other options, we are...

The MBS hydraulic cylinders of the MZR-1021 series are designed as differential cylinders for applications with high quality requirements in stationary mechanical engineering. All cylinders work with low friction and are characterized by a stick-slip free run. Hub and piston rod protrusions are variable selectable. The cylinder is connected via a head flange mounting with centering shoulder and a threaded shoulder on the piston rod. There are connections for high pressure flanges to SAE 6.000 P.S.I as well as vent holes for a free installation position. With the exception of the piston rod and SAE flange surfaces, all surfaces are protected against corrosion with a black primer. On request alternative surface treatments are possible. The surface of the piston rod is hard chromed, ground and polished. The cylinders are suitable for hydraulic fluids of types H, HL and HLP according to DIN 51524/51525. If you have questions about areas of application or other options, we are happy...

The MBS hydraulic cylinders of the MZR-1001 series are differential cylinders for applications with high quality requirements in stationary mechanical engineering. All cylinders work with low friction and are characterized by a stick-slip-free run. Lift and piston rod overhang are variable selectable. The cylinder is connected via a head flange mounting with centering shoulder and a threaded shoulder on the piston rod. There are connections with screw-in holes for pipe fittings to BSPP ISO 1179-2 as well as vent holes for a free installation position. With the exception of the piston rod, all surfaces are protected against corrosion with a black primer. On request alternative surface treatments are possible. The surface of the piston rod is hard chromed, ground and polished. The cylinders are suitable for hydraulic fluids of types H, HL and HLP in accordance with DIN 51524 / 51525-1. If you have questions about areas of application or other options, we are happy to answe

P-60-CK - hydraulic crimping head, 60 kN, CU300mm² for exchangeable dies series "60-CK", "22" for connecting with an hydraulic pump working pressure: 700 bar (10.000 PSI) Characteristics Single acting hydraulic head for connecting at a hydraulic pump Quick coupler system CEJN series 115 with dust protection cap for changeable compression dies NEW! The P-131 series with mechanical stop. Mo demage by using without dies!

The MSC500 magnetic sensor has a large, multi-color status LED that makes commissioning and function monitoring easier for users. The correct distance between the gage and the sensor can be visually monitored.With the plug connection directly on the sensor head, the MSC500 is also suitable for use in very confined spaces. As a result installation is fast and simple, which naturally means lower costs. In addition, the MSC500 sensor includes all digital square wave signals. This enables evaluation of the A/B signals, the inverted signals and the periodic index signals with the same sensor. Max. resolution 1 μm. Max. 200000 pulses/revolution in combination with MR500 or MBR500 (160 poles). Repeat accuracy ±0.005 mm. Status LED with integrated distance monitoring. Works with magnetic tape MB500/1, MR500, MBR500. Reading distance ≤2 mm.  Sensor connection can be plugged with KV1C cable extension. Output circuit PP, TTL, LD (depending on the operating voiltage) .

Read head for connection to position indicators LG20 and LH70 series Output signal: TTL A/B quadrature signal, compliant with EIA-422 Maximum resolution: 10μm Maximum response speed: 300m/min (varies depending on read head and setting) Extremely insensitive to even the harshest environmental conditions (IP65) Resistant to oil, dust, vibration and shock

Can be dismantled in three parts so can be used from out of the building without a core drill, i.e. for FTTX, gas connections Pneumatically driven hammer bore head assembly is ideally suited for alternating soils. If the hammer bore head meets with resistance (larger rock inclusions, solid rock, rubble deposits or brickwork), the hammer effect is activated automatically. The complete system with hydraulic power unit and mixing unit MA09 can be placed on a small trailer for safe transportation. Can be dismantled Portable Can be applied from out of a building

During the setting process, edges on the mandrel head cut the rivet shaft into four segments. These four segments then unfold on the component surface thus forming the large locking head. Once the mandrel reaches its predetermined breakload, the mandrel head falls out of the rivet body. The large locking head allows connecting soft or britt le components and helps transfer high tensile forces.ARCO body-bound blind rivets are preferably used for plastic or wood element assembly, caravan manufacturing and fastening of cladings.

The HB 5010 is a hot melt adhesive tank system with gear pump, especially for manual applications. Together with the hand gun HB 910, the tank system is ideally suited for all bead or spray bonding. The construction of the simple menu navigation of the control unit is so user-friendly that the intuitive operation of the device is possible even for untrained personnel. The extremely resilient plastic housing has a dirt-resistant paint finish. The modular structure of the system increases the ease of maintenance and ensures good accessibility of the parts when servicing. A filter change is possible without additional disassembly. A conveyor system with gear pump ensures a constant volume per unit of time. The simple design of the pump makes it robust and inexpensive. The construction of the pump also enables the processing of polyamides up to 210°C. Up to 2 heatable hoses can be connected. In combination with application heads, automation of simple tasks is possible.

The resistance probe offers a measurement of great accuracy and very good long-term stability. A Pt 100 Ohm probe corresponds to a platinum resistance whose initial value is 100 Ohms for a temperature of 0°C. The measuring element consists of wound platinum wires whose resistance varies according to the temperature. The resistance / temperature correspondence is documented in the IEC 60751 standard. The temperature probe is often delivered with a connection head (see photo opposite).

Sensor with extension tube for screw-in The OPTITEMP TRA/TCA-S12 is a temperature assembly for screw-in. It is predominantly used in the lower temperature range (up to +150°C / +302°F). When it features a neck tube, spatially separating the process connection from the  connection head, the connection head cannot heat up as much. This is particularly important when there is a temperature transmitter in the connection head. Form acc. DIN 43772: Form 2G Design: DIN-style, welded, multipart thermowells Process connection: threads: G 1/2, G 3/4, G 1, 1/2" NPT and 3/4" NPT Neck tube connection: with fixed neck tube Tip design: straight tip Diameter: Ø 9, 10, 11 and 12 mm

Analogue 2-wire temperature Transmitter The OPTITEMP TT 10 is an analogue, multirange 2-wire temperature transmitter which works together with RTDs of the type Pt100. The main field of application is an industrial environment, therefore the device has a high reliability and an excellent industrial performance. The OPTITEMP TT 10 series consists of 2 different versions in terms of the mounting. The TT 10 R is the rail-mount version for DIN rails whereas the TT 10 C is primarily intended to be mounted in a "B connection head" or larger according to DIN EN 50446. As an alternative you can also mount the in-head version on a DIN rail according to EN 60715 with the help of an optionally available rail mounting kit.

Analogue 3-wire temperature Transmitter The OPTITEMP TT 11 is an analogue, multirange 3-wire temperature transmitter which works together with single resistance thermometers of the type Pt100 and Pt1000. A special feature of the device is its 0...10 VDC output that predestines it for the HVAC systems in building services applications. The transmitter has a high reliability and a good industrial performance. The OPTITEMP TT 11 series consists of 2 different versions in terms of the mounting. The TT 11 R is the rail-mount version for DIN rails whereas the TT 11 C is primarily intended to be mounted in a "B connection head" or larger according to DIN EN 50446. As an alternative you can also mount the in-head version on a DIN rail according to EN 60715 with the help of an optionally available rail mounting kit.

Furniture connectting fittings, bolts, zamak head, dowel

Our slab edge formwork is made up of three components: bracket, hook headed bolt connection and stop. In addition to slab edges, with and without overhangs, the slab edge formwork (bracket) can also be used for forming floor slabs.

OPERATING TEMPERATURE: MAX 750°C FLANGE fastening that can be in IRON and STAINLESS STEEL. Size and shape standard or as indicated by the customer. BOXES – HEADS for electrical connections customizable in terms of shape and materials size. (INOX, IRON, ALUMINIUM and PLASTIC also customizable with company logos). PROTECTION: IP40, IP65. Armored heating elements with stainless steel pipe*. Max lenght cad. element up to 8,00 m. Resistive internal filament** insulated with MAGNESIUM OXIDE of first choice.

Uses the HSK-A type, time-proven tool holder shank to connect the head and the work-piece holder. Off-line setup in advance allows quick work-piece changing, minimizing machine downtime. Accepts a variety of workholders Excellent workpiece accessibility In the case where you can’t mount the head directly to your machine table, please use this mounting plate. We can supply a blank that is customisable and also manufacture a special mounting plate just for you. For more information, please feel free to contact us.

Uses the HSK-A type, time-proven tool holder shank to connect the head and the work-piece holder. Off-line setup in advance allows quick work-piece changing, minimizing machine downtime. Excellent workpiece accessibility Workpiece centralizing on flang work holders. Flange work holders These central bosses are used for workpiece location on the Klamp range of flange work holders.

Uses the HSK-A type, time-proven tool holder shank to connect the head and the work-piece holder. Off-line setup in advance allows quick work-piece changing, minimizing machine downtime. Excellent workpiece accessibility The dovetail clamping work-holder with the HSK head works with heavy-duty milling. All Swift Klamp Dovetail work holders are attached to the workpiece usinga simple dovetail. Setup is quick, easy and dovetail work holders only require the minimum of material to hold the workpiece. That means less waste, easy preparation, and no distortion to the workpiece.Dovetail machining of the work-piece clamping area using an angular cutter is required prior to machining

ROCIA.planar is a robust and simultaneously high-precision spotlight whose technical details, in particular the full-metal design, guarantee a high security of investment. Its 3D head joint, high illuminance and outstanding light quality guarantee exact adjustability and set standards in terms of ergonomics. • Maintenance-free LED technology • For strong, large-area and uniform lighting • Robust aluminium housing • High degree of protection • Chemically resistant to many media such as oils or cooling lubricants • Exactly adjustable arm with 3D head joint • Connection to mains voltage

The pivoting-head luminaire ROCIA.focus offers maximum flexibility. The mobility of its pivoting head allows the light beam to be directed precisely to where it is needed. The extremely precise lighting allows focused and concentrated work – also thanks to different beam angles. • Maintenance-free LED technology • Strong high-power LEDs for maximum light • With narrow- or wide-beam illumination characteristic, as desired • Robust aluminium housing with solid safety glass screen • Viton® seal for high degree of protection • Chemically resistant to many media such as oils or cooling lubricants • Exactly adjustable pivoting head • Direct connection to machine voltage