Concrete testing machines - Import export

Standard reference force transducers specially designed for checking concrete testing machines according to the EN 123904 or standard DIN 513022. o Allows the homogeneity of the repartition of the forces generated to be checked by verifying selfalignment and restraint on movement of the upper plate alignment of the machine's component parts o Standard dimensions o 4 independent full bridges at 90°

Over one pallet 18 pcs blocks 19х39х19. Pressing time 20 second İn one hour 3240 pcs blocks producing. Over one pallet 42 pcs interlocks. Pressing time 28 second İn one hour 5400 pcs interlocks producing.

Capacity: 6m3/h Pump Capacity: 40mt up 220v or 400v Available Automatic foam producing system

ZIM 1536 machine is a high-end machine designed for the production of concrete blocks, concrete paverstones and concrete curbstones. ZIM 1536 comes out with high-end hardware, wide options of production and low labor cost. It can be used in automatic facilities such as FINGER CAR, BASKET SYSTEM, L TYPE SYSTEM. Our machine that can produce 15 blocks or 36 paverstones in one press, is designed to produce 1200-1400 pallets per day. Aiming at maximum capacity with mass production, our machine is designed to work non-stop! Our machine, which can follow the mortar in machine with the loadcell system in the bunkers, takes you to the next level with the proportional mortar car movement, and reaches the maximum quality with the mold balancing and pressing system, is a pioneer in the sector with its many hardwares!

Our ZIM 820 machine is a mid-entry machine designed for the production of double-layer paving stones. The ZIM 820 stands out with its low energy consumption, wide choice of production and high return on investment. It can be used manually, semi-automatically and fully automatically if requested. Our machine, which can produce 8 concrete blocks or 20 concrete paverstones in one press, is designed to produce 1000 pallets per day. To facilitate this production and increase quality; It has many features such as internal shaking system in the mortar cart, driver-controlled vibration system, special balancing system on the upper mold, and a specially designed vibration table. We are using “ FULLDRIVE ” frequency controlled vibration systems in our machine. This helps the life cycle of vibration engines and also decreases the total electrical consumption of vibrators.

ZIM A 2625 machine is designed to increase efficiency for production of pipes and culverts. It has uniqe specifications to increase production capacity, using life, products quality. This machine can produce pipes 800mm – 2600mm diameter and 2500mm height.Machines can be designed semi or full automatic according to requirements. We use SIEMENS brand PLC microprocessors on automatic machines. The vibration system of machine is controlled by frequency driver controll system. It does not need any mechanic settings. It can easily adjusted from operator pannel. The vibrator system specially designed by our R&D team is used in our machines. The cooling of the vibrators are done by oil cycle system. There is a special unit for that cycling process. Oil flow is controlled by special sensors. Thanks to this technology our machines which have been working for many years without any problems, stand out with their low operating costs.

ZIM T 1220 machine is designed to produce pipes. It uses forklifts to transport concrete pipes and it makes the production cycle shorter. Also it has uniqe specifications to increase production capacity, using life, products quality. This machine can produce pipes 300mm – 1200mm diameter and 1000mm – 2000mm height. The machine can be designed for producing single, double and triple pipe in a press. The vibration system of machine is controlled by frequency driver controll system. It does not need any mechanic settings. It can easily adjusted from operator pannel. The vibration system specially designed by our R&D team is used in our machines. The cooling of the vibrators are done by oil cycle system. There is a special unit for that cycling process. Oil flow is controlled by special sensors. Thanks to this technology our machines which have been working for many years without any problems, stand out with their low operating costs.

The inspekt blue material testing machines were designed for standard and routine tests. These universal testing machines are used, among other things, in quality assurance and are characterised by a particularly attractive price/performance ratio. The inspekt blue is suitable for tensile tests, compression tests, peel tests and bending tests on various materials. In combination with the ergonomic design and the new brushless drive concept, a safe and fast measurement is guaranteed with simplest operation both in the rough production environment and in the sterile laboratory area. Main features: - innovative brushless drive without gear drive - reduced noise pollution due to low engine speed and optimized frequency range - freely selectable control of crosshead travel, force or elongation - high-precision force measurement by strain gauge force transducer - versatile adaptation of accessories and additional force transducers

One-column testing device for the motorized transmission of compressive and tensile forces of up to 1000 N. Integrated measurement and automatic shut-off for interruption upon reaching limits (force/stroke) available.

Two-column test stand for manual transmission of compressive and tensile forces of up to 5000 N. Also suitable as a basis for the positioning of torsion tests.

Two-column testing device for the motorized transmission of compressive and tensile forces of up to 5000 N. Integrated incremental position measurement and automatic shut-off for interruption upon reaching limits (force/stroke) available.

Universal Testing Machine for methodical component and materials testing for forces up to 2 kN. Fields of applications are everyday industrial procedures in rough environments as well as in laboratories, in the fields of research and development or teaching. This technically mature product for static tests with modern measurement and control technology, the suitable right accessory and the innovative testing software TesTWinner® meets all requirements of modern material testing. In addition the model is equipped with the TesTController 850. The corresponding software TesTWinner® provides the user - besides to its free programmability - an immense repertoire of possibilities for standard test procedures and routine test execution, evaluation, presentation and further processing of results, automation of processes, and much more. A wide application field is guaranteed by a comprehensive range of accessory.

Universal Testing Machine for methodical component and materials testing for forces up to 1 kN. Fields of applications are everyday industrial procedures in rough environments as well as in laboratories, in the fields of research and development or teaching. This technically mature product for static tests with modern measurement and control technology, the suitable right accessory and the innovative testing software TesTWinner® meets all requirements of modern material testing. In addition the model is equipped with the TesTController 850. The corresponding software TesTWinner® provides the user - besides to its free programmability - an immense repertoire of possibilities for standard test procedures and routine test execution, evaluation, presentation and further processing of results, automation of processes, and much more. A wide application field is guaranteed by a comprehensive range of accessory.

Universal Testing Machine for methodical component and materials testing for forces up to 100 kN. Fields of applications are everyday industrial procedures in rough environments as well as in laboratories, in the fields of research and development or teaching. This technically mature product for static tests with modern measurement and control technology, the suitable right accessory and the innovative testing software TesTWinner® meets all requirements of modern material testing. In addition the model is equipped with the TesTController 850. The corresponding software TesTWinner® provides the user - besides to its free programmability - an immense repertoire of possibilities for standard test procedures and routine test execution, evaluation, presentation and further processing of results, automation of processes, and much more. A wide application field is guaranteed by a comprehensive range of accessory.

Torsion testing machines by TesT are executed as horizontal machines with torsionally rigid machine bed. They are individually built as construction kit versions, always in accordance with customer demands. Thus, it is easily possible to incorporate individual preferences and specific customer requirements. Drive and control units, machine tables, frames and data acquisition will be integrated as finished components. All torsion testing machines are equipped with the TesTController 850 that is TEDS compatible. The corresponding software TesTWinner® provides the user - besides to its free programmability - an immense repertoire of possibilities for standard test procedures and routine test execution, evaluation, presentation and further processing of results, automation of processes and much more. A wide application field is guaranteed by a comprehensive range of accessory.

The testing machines of model series 215 were developed and built for applications with extremely small measuring ranges, below 0.1 Ncm, and highest precision. They are for example used in watch idustry or medical technology. All torsion testing machines are equipped with the TesTController 850 that is TEDS compatible. The corresponding software TesTWinner® provides the user - besides to its free programmability - an immense repertoire of possibilities for standard test procedures and routine test execution, evaluation, presentation and further processing of results, automation of processes and much more. A wide application field is guaranteed by a comprehensive range of accessory.

Friction coefficient testing machines of model series 205 by TesT are market-leading, with patented components and always built according to most modern test methodologies. Thus, TesT has created an instrument for safe and fast testing of screw connections for screws and bolts of M3 to M80. The determination of friction coefficients is in the focus of analysis.

The testing machine series inspekt table was developed for standard-compliant materials and component testing in the medium load range, with particular attention paid to reliability and flexibility. It is ideally suited for materials testing of plastics or non-ferrous metals as well as for testing smaller components, for example from instrument engineering. In combination with our user-friendly testing software LabMaster, standard-based and customer-specific tests can be easily implemented. Testing machine, testing software and our extensive range of accessories such as specimen grips and testing tools, extensometers or temperature control devices are optimally matched to each other and offer the ideal testing system for a wide variety of testing applications (tensile tests, compression tests, bending tests, peel tests,...). Inspekt table is available in six different load levels from 5 kN to 250 kN.

The inspekt duo is a versatile two-spindle testing machine for test loads of 5 to 10 kN. It is a further development of the inspekt table blue series from Hegewald & Peschke. The inspekt duo machine series is ergonomically designed. Characteristic features include the large base plate, which allows the connection of peripheral devices such as extensometers, as well as the coupling of a tool tray and the equipment with protective doors. This guarantees use in harsh production environments as well as in sterile laboratories. The LabMaster materials testing software is available for fast and reliable evaluation of test results. As a cost-optimized table-top device of low weight, it is suitable for both simple and customer-specific tensile, compression and bending tests on a wide variety of materials, including wires, plastics, elastomers, paper, cardboard, food, hygiene articles, textiles, springs and wood.

The universal testing machine inspekt solo is a very lightweight testing machine, which has been designed for simple standard tests or customer-specific, more challenging tests. It stands out due to its convincing cost/performance ratio and the user-friendly manner of operation. In connection with the testing software LabMaster, inspekt solo universal testing machines can determine material characteristics of wires, foam plastics, elastomers, plastics, paper, cardboard, textiles, foodstuffs, and components in a quick and easy way. The Inspekt solo for test loads up to 2.5kN is a further development of the successful inspekt mini series for standard-compliant material and component testing in the low load range. In order to be able to better represent the wide range of requirements for this machine series, new technological possibilities have been exploited. Instead of DC motors, a new drive concept with stepper motors was developed - brushless, low-wear and noise-optimised.

The modernization of an existing testing machine provides a cost-effective alternative to a new acquisition. The use of existing accessory can be continued in most cases. Through the exchange of sensor, measuring and control technology as well as the installation of new safety devices an older testing facility can be brought to the current state of technology. We offer you a free assessment of the feasibility by our service or sales staff and ask you about the desired extent. On this basis you will receive our offer.

The ideal system for individual testing situations and all applications. AllroundLine can be used for applications from all areas. A proven operating concept combined with flexible, modular load-frame design makes the AllroundLine an optimum solution for demanding testing applications, whether for quality control or for research projects. Development and manufacture of AllroundLine, including all mechanical, electronic, and software components—together with the comprehensive range of accessories—takes place at ZwickRoell's production facility in Germany, so all components work together seamlessly. Typical tests: - tensile test on metals (eg ISO 6892, ASTM E8), plastics (ISO 527), composites, rubber, ... - bending tests - flexure tests - shear tests - components tests

For measuring ranges up to 600 Nm Torsion testing machines by TesT are also available as vertical machines, equipped with T-slot table and height-adjustable drive. They are individually built as construction kit versions, always in accordance with customer demands. Thus, it is easily possible to incorporate individual preferences and specific customer requirements. Drive and control units, machine tables, frames and data acquisition will be integrated as finished components. All torsion testing machines are equipped with the TesTController 850 that is TEDS compatible. The corresponding software TesTWinner® provides the user - besides to its free programmability - an immense repertoire of possibilities for standard test procedures and routine test execution, evaluation, presentation and further processing of results, automation of processes and much more. A wide application field is guaranteed by a comprehensive range of accessory.

The zwickiLine testing machine is equally ideal for research and development as it is for routine quality assurance testing. Development and manufacture of the zwickiLine, including all mechanical, electronic, and software components—together with the comprehensive range of accessories — takes place at ZwickRoell's production facility in Germany, so all components work together seamlessly. Your benefits: - load range from 500 N up to 5 kN and with test-area heights from 565 mm to 1365 mm - Low weight, a small footprint and space-saving design - Suitable for tensile, compression, flexure and bending tests on different materials and components - Wide range of specimen grips and testing tools