Concrete plasticizers - Import export

Distriplast is the European manufacturing leader in PP corrugated sheeting for the building sites. Manufacturing 24/7 in Dunkirk, close to UK with corresponding short lead times. Made of black reground PP, and for the LPS1207 sheets from prime PP.

Designed to protect joists against moisture and rainwater and thus increase the life of the terrace. 100% waterproof band. Resistance Resistance to temperatures from 40°C to +60°C. Resistances to atmospheric agents UV and freeze. Robust, the band is tearproof and nondeformable. 100% waterproof, protect and extends the service life of the joists structure. Manufacturing Made in France, the RINNO bituminous tape is made with bitumen, aluminium foil and silicone protection. Conformity RINNO bituminous tape comply with current standards DTU 43.1. Self adhesive bituminous tape Place the tape on a dry and clean support. Adheres to most building materials wood, plastic, glass, concrete, metal. Ideal for wood, roof, piping, framing… Robust, the band is tearproof and nondeformable. Reduce resonance when walking on the terrace. Protects and extends the service life of the joist structure.

TECHNICAL DEFINITION SEMIN AIRLESS COVER is an indoor coating that can be Airless sprayed. COMPOSITION AND APPEARANCE Acrylic emulsion resin, mineral content, cellulose derivatives, preservation agent and various additives. The resulting paste is white and its consistency is adapted to its airless application. ACCEPTED SUBSTRATES • Fair-faced concretes. • Plasters boards. • Old droplets • Porous concrete PACK SIZE 25 kg. Plastic bags and tubs. SUITABLE SURFACES The SEMIN AIRLESS GARNISSANT layer can be applied with the help of an acrylic or gloss paint. TECHNICAL CHARACTERISTICS • Dry extract : 72% • Density : 1;88 • COV : < 1g/ litre APPLICATION SEMIN AIRLESS covering layer is sprayed in two steps : the first must be smooth with the help of a 60 cm blade, after drying the second one must be smoothed with the blade. The product must be sprayed at about 80 cm from the support. TIP : Lift filters before spraying.

Quality concrete of any grade and consistency range, concrete with special characteristics (e.g. water impermeable concrete), pumped concrete, material cost optimization for production of low cost quality concrete. High increase of consistency and/or w/c-reduction, gives homogeneous concrete with good workability.

For installation of pipe clamps with excellent optical characteristics Suitable for installation on walls, carports, winter gardens and dormers of roofs Can be used on concrete, wood, plastic and sheet metal surfaces Can be fixed with wood screws, screws for sheet metal or blind rivets Available surface: Zinc plated We would be very pleased to support you with all your individual questions and suggestions regarding WUS. Give us a ring or leave a message indicating the information you need. We will contact you as quickly as possible. Your WUS team

Water-repellent admixture with plasticizing effect for concrete masonry blocks. Protection from driving rain and moisture penetration, high density, improvement of mould filling and compaction, reduced efflorescence.

In particular for coloured slabs (flags) produced by the hermeticprocess and coloured precast concrete products. Hydrophobic capillary sealing, plasticizing, pronounced colourintensifying effect.

Available as water-dilutable concentrate or as ready-to-use emulsion for wood shuttering and for wooden or plastic boards in concrete products manufacturing. Very economic in use, mineral oilbased, very economic in use, easy and fast demoulding, smooth and flawless surfaces.

Properties High torque Rated frequency 7,800 – 38,000 rpm Centrifugal force 1,680 – 12,000 N Continuously variable Can be used up to 150°C Resistant to extreme environmental conditions Field of application Compacting of plastic and concrete Assisting the flow of material in silos and hoppers Separating of diffrent sized products on sieve

Available as water-dilutable concentrate or as ready-to-use emulsion based on renewable raw materials for wood shuttering and for wooden or plastic boards in concrete products manufacturing. Economic in use, easy and fast demoulding, uniform and smooth surfaces, biodegradable, based on renewable raw-materials.

The Hiresta – UX measuring device is used to measure semiconductors or non – conductors (insulators). Measuring range of 10^3 – 10^14 Ω . The Hiresta UX is specialised in measuring the resistance, the surface and volume resistivity of various substances and materials of all shapes and sizes in the high-resistance measuring range. For measurements related to the ASTM D257 / ISO 2951 / JIS K 6911 standard of: antistatic materials flooring materials paper, packaging materials paints, pastes, paints fibers, clothes, fabrics adhesives, greases glass, concrete, ceramics plastics, film materials, foils etc. Up to 2000 measurement results can be exported to USB memory stick The conductivity meter impresses with its compact design, a color 7.5 “TFT touch display and user-friendly menu navigation.

Material: low carbon steel We offer our STAX steel fibers as short fiber according to customer specification (on special request as well as strand on reels). The Ø-fiber strength is approx. 30-50 μm. Regular analyses in our laboratory ensure the quality of our products. Main area of application for our STAX steel fibers is friction material for brakes and clutches, and as concrete reinforcement or in plastic compounds. Further we produce segment wire steel fibers for reinforcement of conrete floors for example.

Self-compacting concrete (SCC), concrete in slump class F2-F6, concrete precast, ready-mix concrete, concrete with very low w/c values and high high slump, prestressed concrete. Special superplasticizers for high exposed concrete quality, with good initial plasticizing action, slump retention and high early strength development at the same time.

Properties High torque Rated frequency 10,000 – 36,000 rpm Centrifugal force 1,070 – 12,500 N Continuously variable Can be used up to 150°C Resistant to extreme environmental conditions Field of application Emptying of hoppers and chutes Screen filters Conveying of particulates Preventing adhesions in pipelines and silos Transporting of fine powders Compacting of plastic and concrete in throughs

DANWELL Deckel mit PEHD Rohren Aussen Profiliert, Innen glatt 400 mm. DANWELL DANLAG/DANLAAG Insulated Cover. Alternative no insulated and (HDPE) Corrugated Plastic Pipe whit 400 mm inside. This cover we can make whit insulating and not insulated. This cover you can by, when you have pipes: Plastic, Concrete, Cement, Iron.

Adhesive and scraper based on hydraulic binders for gluing and shaving inside and outside of polystyrene insulating panels, polystyrene (also embossed), polyurethane, cork, cement wood . Suitable also as a spur on concrete surfaces, rustic, plastic and/or mineral coatings, traditional or premised plasters based on lime and cement both new and old, even if painted provided that they be in an excellent State on plasters that have withdrawal injuries, with application in the first coat of Malvin net. Package: 25 kg sacks-70 sacks-17.50 QL footboards Usage: Indoor/outdoor Color: White/Grey Particle size: ≤ 0.6 mm Yield: As adhesive gluing points 2/3 kg/MQ/gluing at full surface 4/5 kg/MQ • As a spur 3/4 kg/MQ for two coats Vapour-passage resistance coefficient EN 1015-19: μ ≤ 10 Capillary water absorption EN 1015-18: Class "W1" Thermal conductivity EN 1745: λ10, dry, mat = 0.35 W/MK Flexibility: Excellent Certification: Tested according to ETAG 004

Adhesive and lightweight premixed smoothener with glass balls based on hydraulic binders with high constant quality levels. The gluing and shaving of the insulating panels of polystyrene, polystyrene (also embossed), polyurethane, cork, cement wood inside and outside; The shaving of concrete surfaces, rustic, plastic and/or mineral coatings, traditional or premised plasters based on lime and cement both new and old, even if varnished, provided that in excellent condition, plasters which have lesions of Retraction, it will be made with lightened powder adhesive/wiper with glass beads, based on hydraulic binders type "Intocol PP LIGHT" Malvin S.R.L., applied by hand and kneading with the addition of water, with a consumption of 2/4.5 kg/sqm as glue and 2.5/3 kg/MQ as smoothing, with compression resistance to 28 days of category CS III.

It is used to discharge stored bulk flour and similar product from storage bins, concrete, steel and plastic silos and provide smooth operation

Acrylic based, fast drying, solvent based, protective and decorative spray paint. Inside and outside, wood, metal, glass, ceramic, plastic, paper, cardboard, concrete making flowers etc. used on surfaces such as Machinery, spare parts, steel goods, wooden furniture, hard plastic, hobby and handicrafts, motorcycle/bicycle/auto etc. It is suitable for use in areas such as Resistant to fading, harsh weather conditions and water. It is scratch and impact resistant. It is lead-free, does not contain CFC gases that pollute the atmosphere and are harmful to the ozone layer.

Use this guard rail system to secure the edge of your roof, a domed rooflight or other fall danger zone on a flat roof surface (pitch of up to 10°). The handrail is 1100 mm high and made of high-quality aluminium and stainless steel material. Installation is done using a set of plastic or concrete weights - without penetrating your roof surface. EN 13374:2013, A Suitable for roof pitches of up to 10° Distance between the posts: Max. 2.50 m Plastic weights 760 x 800 mm (2 x 25 kg); Weight of the system per m: 30.68 kg Concrete weights 790 x 280 mm (2 x 29 kg) Incl. special fleece material for surface protection

Concrete base coated black plastic

General description Additives are intended for introduction both into ready-made concretes and mortars, and into dry building mixtures to achieve plasticizing and reducing effects, in order to increase strength, fluidity and workability.

Buy here tactile guiding systems for the blind made of steal, metal, plastic and concrete, e.g. studs and strips

Article number: SIKEPAxxx Weight: 7 kg Sizes: H 98 cm CAT. PAG.: 17 Make a choice Color Red/white Yellow/white Yellow/blue Red/white Height: +/- 960mm Diameter Round Base: +/- 220 mm / Height +/- 100mm Pole diameter: +/- 54mm (diameter aluminium pole inside +/- 50mm) Weight: 7,00 kg Material: Concrete Plastic Mix, with aluminum post wrapped in plastic cover Specifications: Non electrical and Explosion proof Yellow/black Height: +/- 960mm Diameter Round Base: +/- 220 mm / Height +/- 100mm Pole diameter: +/- 54mm (diameter aluminium pole inside +/- 50mm) Weight: 7,00 kg Material: Concrete Plastic Mix, with aluminum post wrapped in plastic cover Specifications: Non electrical and Explosion proof Yellow/blue Height: +/- 960mm Diameter Round Base: +/- 220 mm / Height +/- 100mm Pole diameter: +/- 54mm (diameter aluminium pole inside +/- 50mm) Weight: 7,00 kg Material: Concrete Plastic Mix, with aluminum post wrapped in plastic cover Specifications: Non electrical and Explosion...

Soft gasholders serve as a transfer point between the reservoir and the compressor, ensuring the smooth operation of the entire system. With the help of flexible air ducts, the ends of gas holders are connected to the gas-equalizing pipeline, and then to the entire gas-leveling system. The main feature of soft containers, favorably distinguishing them from metal, reinforced concrete and plastic, is the convenience of their operation. Such containers can be stored and transported in a folded form and deployed when installed on site. Therefore, they are easy to transport from one facility to another, to mount and dismantle without any special equipment. Soft tanks can be installed on unprepared areas, they can easily be delivered to hard-to-reach places - tanks in folded form can be transported by car. Two to three workers can handle the installation in a few hours. Another important feature of soft containers is their incomparable ease.

HKM-200 is a powerful and durable mixer for preparing refractory grouts, mortar and other materials. Hardened mixing boiler and blades make working with refractory concrete and other corrosive materials possible. Asymmetrically located blades provide perfect mixing capability and extra balance by preventing vibration. HKM-200 can be used for composing both wet and dry mixtures, with any size of aggregates or fibers. HKM-200 can also resist the stiffness of the putty materials or high plastic consistency of concrete mixtures due to its high torque gearbox. Water resistant electrical motor, gearbox and other electrical components provide max. safety to the operator and make the machine washable after being used. Stresses of all kinds, fireproof masses, screeds, epoxy resins,steel fragment concrete, granules, mortars of all kinds, refractory clay, acoustic plasters, concrete repair plasters,finished detention finery, spray plaster, adhesive,reorganization mortar, dispersions and more.

They mitigate the sound effects of road, highway and railway traffic, with low-environmental-impact integrated solutions. In order to reach the best noise abatement results and environmental and landscape integration, FIP INDUSTRIALE is able to perform: local sound monitoring activities; assessment of the visual environmental impact; design and building of noise barriers; sound testing of built structures. TYPES: Tecnowall metal panels Tecnowall wooden panels Tecnowall clear panels Tecnowall concrete panels Tecnowall recycled plastic panels Tecnowall mixed panels Elliptical reducer Industrial noise barriers

CALCIUM NITRATE SOLUTION 50% The product, CALCIUM NITRATE SOLUTION 50%, is a super plasticizing anti-freeze and set accelerating admixture for concrete and mortar. The set accelerating/Anti-Freeze / plasticizer concrete admixture is suitable for cold weather conditions that increases set acceleration and early strengths by increasing the reaction between water and cement especially at the start of set

ANT-1453 is used in concrete retardant concrete admixtures. A good plasticizer and water reducer for concrete and mortar. Improves freezing and dissolution resistance. Extends the processability of concrete. Detailes information contact with us please.