Composite cables - Import export

Flextrack® is a range of high flex flat cables for the automation and robotics industry. They meet the most demanding applications requiring tens of millions of flex cycles. They are designed for high flex applications including Pick and Place industries. Their flat configuration allows for space saving compared to a round cable. Flextrack® laminated flat cables are lightweight and flexible. They resist to high temperatures, repeated flexions and chemical products.

Axon' design and manufacture composite cables specially designed to meet customer requirements irrespective of the application. They are able to resist the most demanding electrical, mechanical and environmental requirements. Advantages Dependent on the application Flexibility Flexlife, resistance to torsion Resistance to fuel, heat and solvents EMI protection Resistance to sterilisation (medical application) Construction Flat or round construction integrating flat or round wires, coaxial cables, tubes, shielded cables, ... Hybrid electrical, electro-optical cables Composite cables insulated with fluorinated materials, heavy metal free materials, halogen free materials, PTFE, celloflon®, vitax™, PEEK, silicone and other materials suited for your applications Applications Electromechanics Engines Machines Robots Medical imaging Endoscopy Radars Missiles Electronic systems Satellite cabling Research, ...

Axon' has developed picocoax® a complete range of miniature coaxial cables and harnesses for applications where a large number of signals have to be transmitted with no interference. They can be used for measurement equipment and medical devices. Picocoax miniature coaxial cables offer a good compromise between small diameter (for example 0.20 mm) and capacitance of 50 to 100 pF/m. Picocoax® miniature coaxial cables are made with silver plated copper alloy conductor and high performance dielectric materials including FEP or Celloflon (porous PTFE patented by Axon'). Axon' also offers multipicocoax made with bundles of 18 to 304 picocoax cables. These composite cables are very flexible.

Spiral cables and cords axospiral® can be used for any electrical connection involving portable devices and moving equipment where flexing would cause damage to conventional wire and cable constructions. Axospiral composite cables have many advantages : flexibility, space saving, resistance to heat, chemicals, solvents. Axospiral wires and cables insulated with FEP, PTFE, ETFE, PFA, polyimide, vitax™, PU, ... dependent on the application. They can be overmoulded or terminated with different types of connectors. Axopiral composite cables and cords can be used for various applications: medical instrumentation, computer printers, robotics, test equipment.

Flexforce™ power cables are flexible composite cables designed for applications where high currents have to be carried. Their main advantages are as follows: high current carrying capacity, very good resistance to cut-through, to high temperature (150 C°). Possibility of shielding for excellent EMI protection. Resistance to fluids (hydraulic liquid, mineral oil, gasoline, diesel). Flexforce flexible power cables are made up of extra-flexible tin plated copper conductors insulated with FEP or Axon's special high temperature thermoplastic ASC15 and including separating tapes.

Power cable with copper cores, XLPE insulation, PVC or polymer halogen free composition sheathed power cable, shield: copper foil, tape or braids, armour: zinc-coated steel wire, aluminium tape, zinc-coated steel tapes.Application: these cables are suitable for indoor and outdoor installation, in air and ground, where the cables should be flame retardant and halogen free. Fire resistant/flame-retardant/low smoke/low smoke and toxic fumes/cold resistant/shielded/armoured/halogen free

Self-supporting protected composite wire with a conductor made of aluminum alloy, with a central strength member made of FRP rod in PE sheath (or without it); around it are stranded tubes containing up to 24 optical fi bers each and (if necessary) fi lling dummy tubes; outer sheath made of light-stabilized cross-linked PE. The wire is designed for suspension and service on supports of aerial power lines for rated voltage of 20 and 35 kV in atmosphere of types I, II and III in climatic version B according to Russian National Standard GOST 15150-69, in atmosphere over sea and salt lake shores, in industrial zones, and saline lands. Operational temperature of the cable is from -60°С to 70° С. Minimum temperature for installation is -30°С.

Aerial Figure 8 optical cable with a central strength member made of FRP rod in PE sheath; around it are stranded tubes containing up to 24 optical fibers each and (if necessary) filling dummy tubes, insulated copper conductor; with an outer strength member made of FRP rod, steel strand, or steel wire; with outer PE sheath. Operational temperature of the cable is from -60°С to 70° С. Minimum temperature for installation is -30°С.

Distribution optical cable with a central strength member made of FRP rod in PE sheath; around it are stranded tubes containing up to 24 optical fibers each, filling dummy tubes (if necessary), insulated copper conductor in outer PE sheath. Operational temperature of the cable is from -40°С to 70°С. Minimum temperature for installation is -10°С.

Distribution optical cable with a central strength member made of FRP rod in PE sheath; around it are stranded tubes containing up to 24 optical fibers each, filling dummy tubes (if necessary), insulated copper conductors, with intermediate PE sheath, with water-blocking tape, laminated aluminum PE tape; with an armor made of steel corrugated tape and outer PE sheath. Operational temperature of the cable is from -60°С to 70°С. Minimum temperature for installation is -30°С.

Optical cable for backbone networks with a central strength member made of FRP rod in PE sheath; around the central strength member are stranded tubes containing up to 24 optical fibers each, filling dummy tubes (if necessary), insulated copper conductors, with laminated aluminum PE tape; in inner PE sheath, with an armor made of round steel wires and outer PE sheath. Operational temperature of the cable is from -40°С to 70°С. Arctic version -60°С to 70°С Minimum temperature for installation is -30°С.

Composite cable conduit made of PE-HD with outer corrugation in coils Manufactured acc. to DIN EN 61386-24 Standard design: Type: with outer corrugation and inner pipe Typ: 450 N Sleeve type: double plug-in sleeve, sand-tight design Material: PE-HD Length: 50 m in coils, with inside cable pull-in aid Colour outer surface: black Possible designs: Sleeve type: double plug-in sleeve, water-tight design Length: on request Colour: red, yellow, blue, green or orange

Composite cable conduit made of PE-HD with outer corrugation Manufactured acc. to DIN EN 61386-24 Standard design: Type: with outer corrugation and inner pipe Type: 450 N Sleeve type: double plug-in sleeve, sand-tight design Material: PE-HD Length: 6 m Colour outer surface: black Possible designs: Sleeve type: double plug-in sleeve, water-tight design Length: on request Colour: red, yellow, blue, green or orange