Results for
REFRA, UAB
Lithuania
CO2 Compact systems are designed for small retail shops and can be manufactured for medium temperature cooling. Based on Carel HECU system for complete management of condensing units fitted with BLDC compressors, these products can be adjusted remotely. The serial connection between the condensing unit and the evaporators controlled by MPXPRO represents one of the main features of this solution, contributing to the energy efficiency and reliability of the entire system. The built-in plug and play interface provides the ability to install and set up the unit extremely quickly and easily. GREEN SOLUTIONS | This unit is a part of Refra‘s environmentally friendly product group, as it is made using CO2 refrigerant. Such low GWP solutions are designed to have better efficiencies and capacities, as well as less environmental damage.
Request for a quoteEXPROZONE
Turkey
Elevate Your Daily Routine: Embrace Relaxation and Renewal in Our Stylish Shower Enclosures & Shower Compact Systems.
Request for a quoteROLLON GMBH
Germany
Compact Rail Plus linear guides feature double row ball bearings for higher load capacities and rigid rails with convex raceways and new robust steel sliders with longitudinal protection and floating wipers, Compact Rail Plus has been designed for the most demanding applications in terms of high load capacities, high dynamics and work environment. All while maintaining the self-aligning capabilities that make this product family unique. Sliders are available in four versions: guiding slider (RV); floating slider (RP); extra-floating slider (RU) and rotating slider (RA). Combining two rails with different sliders makes it possible to create self-aligning systems that can compensate misalignment errors on two planes: axial up to 3.5 mm and radial up ±1.3°.
Request for a quoteROLLON GMBH
Germany
The Easyslide is a system of cold drawn steel linear rails with induction hardened raceways. The linear guides consists of an external 'C' profile linear rail and incorporated caged ball bearings. Five rail widths: 22, 28, 35, 43 and 63mm The sliders inside the linear rails ensure an exceptionally compact system System high load capacity Optimal operation even when shocks and vibrations are experienced Multiple standard lengths available depending on the linear rail section (up to 2,000mm). Special lengths are available on request The Easyslide product family includes compact size linear rails with caged ball bearings, fitted with one or more sliders per rail, to ensure high load capacity and long life. If more than one slider is used in the SN series, they can slide independently inside their own cages, or simultaneously in a single cage. The SNK series features rails with hardened and ground raceways. Variable slider strokes and lengths can be selected. All Easyslide linear...
Request for a quoteROLLON GMBH
Germany
Telescopic actuator with a synchronized toothed belt system for effective linear movement and minimal overall dimensions. The compactness of the closed system makes it ideal for environments without much space between the machine and the ceiling. LOAD CAPACITY ACCORDING TO DYNAMICS Reported data must be verified according to the application. Please get in touch with our technical department for more information.
Request for a quoteBIZERBA SE & CO. KG
Germany
The robust metal detector can be variably used in dry and wet environments. It ensures best test results for packaged or unpackaged piece goods. VARICONcompact safely checks for any contaminants enclosed in the product such as steel, stainless steel and non-ferrous metal, e.g. aluminum. The compact metal detection system works with highest detection sensitivity. Ideally suitable for a save test performance. With its robust stainless steel conveyor belt construction the VARICONcompact inspects piece goods of up to 20 kg. A very short metal-free zone (MZ) ensures interference-resistant, reliable inline metal detection.
Request for a quoteSTRATE TECHNOLOGIE FÜR ABWASSER GMBH
Germany
2DFmaster AWAcontrol control system for STRATE sewage pumping stations with two pumps each and an installed overall motor rating of 0.75 kW to 75 kW each. Particularly suitable for building services engineering and municipal applications (twin systems), offers outstanding ease of use and functionality of the AWAmaster technology also for pumping capacities over 4 kW. LCD plain text display Thermal and electrical motor monitoring Manual – 0 – Automatic functions Pump switch-off through switch-off point with run-on time Acknowledgement button Electronic monitoring of the motor current Forced switch-on, switchover and alternation of pumps Internal acoustic alarm Collective fault message potential-free and potential-bound Backwater alarm potential-free All settings and fault messages retained after power failure Operating hours counter High resistance to interference Simple operation Level recorded either by internal pressure transducer, external 4 – 20 mA probe or float switch
Request for a quoteSTRATE TECHNOLOGIE FÜR ABWASSER GMBH
Germany
Compact control systems with micro-processor technology for controlling STRATE sewage pumping stations with two pumps each and an installed motor rating of up to 5,5 kW per pump. Particularly suitable for building services engineering (twin systems) and do not require a separate control cabinet. Compact control system AWAmaster 2 in plastic housing Ready for connection with 1.5 m cable and CEE plug 16 A, 5-pole Parallel operation of both pumps to cope with increased sewage volume (e.g. during heavy rain) LCD plain text display Thermal and electrical monitoring of the motors Manual – 0 – Automatic functions Pump switch-off through switch-off point with run-on time Acknowledgement button Electronic monitoring of the motor current Forced switch-on, switchover and alternation of pumps Variable graduated start-up (switch-on delay) Internal acoustic alarm Collective fault message potential-free and potential-bound Backwater alarm potential-free
Request for a quoteSTRATE TECHNOLOGIE FÜR ABWASSER GMBH
Germany
The compact control system with micro-processor technology for controlling STRATE sewage pumping stations with one pump and an installed motor rating of up to 5,5 kW. Particularly suitable for building services engineering (single systems) and do not require a separate control cabinet. Compact control system AWAmaster 1 in plastic housing Ready for connection with 1.5 m cable and CEE plug 16 A, 5-pole LCD plain text display Thermal and electrical monitoring of the motor Manual – 0 – Automatic function Pump switch-off through time or switch-off point Acknowledgement button Operating hours counter Ammeter Electronic monitoring of the motor current Forced pump switch-on Variable graduated start-up (switch-on delay) Internal acoustic alarm Collective fault message potential-free and potential-bound Flood alarm potential-free All settings and fault messages retained after power failure (battery back-up not required) Reserve inputs for float switch, telecontrol module
Request for a quoteNORELEM FRANCE
France
The easy operability and rapid adjustment using a scale means that the clamping jaws can be quickly and surely adapted to new workpieces The workpiece is always centred through the systematic construction of the 5-axis compact clamping system. The optimal accessibility to the workpiece allows short, standard tooling to be used. Tooling costs are significantly reduced. Positive down force by a clamping depth of >5 mm. Clamping widths of 20 mm to 320 mm are possible. Assembly: The 5-axis clamping system compact can be mounted on T-slot tables, grid systems or, using an adapter flange on conventional zero-point clamping systems. Accessory: Seating ledge 41345 Jaw plates 41320 Pendulum jaws 41325 Centre jaws 41335 Coupling for cross-clamping 41365 Order the seating ledges and jaw plates with pins separately.
Request for a quoteNORELEM FRANCE
France
The 5-axis vice features excellent stability and flexibility, and is extremely easy to use. The 5-axis vice can be used as a positive-down force vice or normal vice. When the positive down force function is used, the workpiece can be held with a repeat accuracy of ±0.01 mm. A workpiece clamping height of 180 mm enables easy access during machining. The clamping width is preset using the crank handle, cutting down on setup times. Additionally, the closed geometries and the resistance to dirt that they provide keep maintenance and repair times to a minimum.
Request for a quoteMEDIZIN- UND LABORTECHNIK ENGINEERING GMBH DRESDEN
Germany
The FIA system of MLE GmbH Dresden is an automated analytical system designed for laboratories of water and environmental analysis. Parameters of samples are photometrically measured with standardised procedures. The applied technique of flow injection analysis has been become a standard method for ion analysis of aqueous samples, food extracts and eluates from soil. According to your needs the modular system design ( FIAmodula and FIAcompact) enables customized system configurations. Already existing systems can be expended to fulfill new laboratory requirements.
Request for a quoteENVEA
France
A complete “all in one" compact system, for multigas measurements, based on the fieldproven MIR 9000 analyzer and onboard SEC sampling system. Fast & simultaneous measurement of up to 10 gases among HCl, NO, NO2 (NOx), SO2, CO, CO2, HC, CH4 (TOC), HF, N2O, O2, at the sampling location. • integrated sample drying & system conditioning, no sample line necessary • designed for measuring wet & corrosive samples • complete CEMS in one cabinet combines infrared analyzer, sample conditioning • highly accurate, excellent calibration stability with automatic optional check
Request for a quotePWL GMBH & CO. ANLAGENTECHNIK KG
Germany
Brief Description The PWL compact unit MODULAR is a multifunction unit combining waste water sieving with the discharge of grit and grease in one compact system. Due to its modular design the PWL compact unit can be equipped appropriate to individual waste water conditions. Among all kinds of screens the MODULAR can be used with drum screens within the inlet area. The different kinds of solids are separately carried out of the unit for further treatment or discharged into a container. Function Via pumps or gravity flow the waste water reaches the headbox of the MODULAR. The screen integrated into the headbox discharges the separable solids from there either to the downstream PWL Interval-Wash-Compactor or into a container. The waste water charged with organic and sand runs off directly from the headbox into the aerated grit chamber. The free fats and lightweight substances reach due to the prevailing roller stream the integrated grease trap. The arising floating layer is...
MTA ROBOTICS AG
Switzerland
As a complement or an alternative to wave, mini-wave and traditional selective soldering techniques, the MPS700 bottom side selective soldering machine provides maximum accessibility and meets mass production requirements of quality, reliability and cycle times. The iron head is equipped with a powerful heating element and a high precision wire feeder. The solder point positions are adjusted using a compact vision system close to the iron head. A 4-axis system guarantees quick and precise movements. The MPS700 can be equipped with mta classic soldering iron head and MSH150 soldering iron head.
Request for a quoteMICRO-EPSILON
Germany
The compact video endoscope systems from Micro-Epsilon Eltrotec present the optimum solution for your mobile application. The modular system has a wide range of probes with different diameters and working lengths as well as camera and light technologies. This results in a huge spectrum of configuration possibilities.
Request for a quoteSCHMITTER HYDRAULIK GMBH
Germany
Oil air - cooler SH - DCN Cooler material: Aluminum Hood / foot material: Steel Maximum operating pressures: 20 bar dynamic, 26 bar static Application and characteristics: As well as a compact ... Category Hydraulic systems, valves and components / Oil air cooler / Serie SH-DCN Product number supplier 46566007
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
MICRO-EPSILON
Germany
The eddyNCDT 3005 is a compact inductive measuring system (eddy current) for precise displacement and position measurements. The system comprises a robust controller, a sensor and an integrated cable and is factory-calibrated either for ferromagnetic or non-ferromagnetic materials.
Request for a quoteSCHMITTER HYDRAULIK GMBH
Germany
Oil air - cooler SH - ACN Cooler material: Aluminum Hood / foot material: Steel Maximum operating pressures: 20 bar dynamic, 26 bar static Application and characteristics: As well as a compact ... Category Hydraulic systems, valves and components / Oil air cooler / Serie SH-ACN Product number supplier 46566013
Request for a quoteSCHMITTER HYDRAULIK GMBH
Germany
Oil air - cooler SH - ACN Cooler material: Aluminum Hood / foot material: Steel Maximum operating pressures: 20 bar dynamic, 26 bar static Application and characteristics: As well as a compact ... Category Hydraulic systems, valves and components / Oil air cooler / Serie SH-ACN Product number supplier 46566013
Request for a quoteUNEX HEATEXCHANGER ENGINEERING GMBH
Austria
The UniWeld combines the advantages of conventional shell and tube heat-exchangers with spiral and plate heat-exchangers due to its design and construction. This mixed construction is based on the design of the heat-transfer channels, which are on one side in the tube design and on the other side in a plate heat-exchanger. UniWeld Hybrid exchangers utilise in this way the advantage of tubular heat-exchangers (high temperature, pressure resistant and solid construction) and plate heat-exchangers (high heat transfer, minimal space and low logarithmic temperature difference) in a compact system. Other advantage compared with gasketed plate heat-exchangers is the safe splitting of the 2 media at pressures up to 80 bar and between -200°C and +900°C.
Request for a quoteKASAG SWISS AG
Switzerland
Fat melting systems The KASAG fat melting system are compact systems for melting fat blocks from palm kernel fat, palm oil fat, coconut fat and concentrated butter. The liquid grease thereby gained is kept in the collecting tray at a specified temperature to be used in the respective production process. Size and design are determined by KASAG according to the requirements of the customer. Fat oil station KASAG fat oil station is an extension of the fat melter and is used to mix the ingredients into the liquid fat. The plants are installed on a base frame with levelling feet. All built components are ready for connection. The hot-water treatment and regulation is conducted via a tempering unit or connection to an existing hot-water network.
Request for a quoteMAHLO GMBH & CO. KG
Germany
Fine-tune straightening of residual distortion This model represents a compact fine-straightening system for the correction of residual distortions. The special strength of the Orthopac MFRC is the extremely high straightening accuracy at relatively small distortions. The compact straightening unit is equipped with a skew and bow roller as standard. This arrangement allows for very fine adjustment of the straightening effect while permitting small device dimensions. Available with hydraulic or electrical straightening roller adjustment.
Request for a quoteTRACTO-TECHNIK GMBH & CO. KG
Germany
For small diameter supply pipes where working is only possible with a winch cable One system for pipe replacement, single pipe bursting and pipe string relining Pipe renewal out of a keyhole possible Application up to 60 m section length at almost constant pulling force Compact modular system for application out of small pits (L x W: 1,20 x 1,00 m) or out of a keyhole (650mm diameter) Fast set up, easy transportation Simple jobsite compatible construction Driven by a hydraulic unit or alternatively via a mini excavator hydraulics Application of winch cables of different diameters by simply exchanging the cable Operation outside the construction pit using a rigboom a and a support frame high working quality, long service life low investment and low operation costs
Request for a quoteACE STOSSDÄMPFER GMBH
Germany
Safety Clamping for Rail Systems, Compact Holding force 300 N Small can clamp perfectly too: The LOCKED-Family SLK clamping elements are more compact than the Series SL. They also clamp directly onto the respective linear guide, suit all standard rail sizes from 15 to 55 mm and profiles from the known suppliers and are extremely reliable and safe. Thanks to the patented spring steel plate system, the product family SLK achieves clamping and holding forces of up to 2,100 N with the shortest reaction times when vented. Thanks to the sintered metal coatings and the clamping function in emergency stop (e.g. in case of a power failure), this range enables braking directly on the rail. All clamping elements offer the maximum holding and braking forces and achieve up to 1 million clamping cycles or up to a maximum of 500 emergency braking operations in the 4 and 6 bar version.
Request for a quoteACE STOSSDÄMPFER GMBH
Germany
Process Clamping for Rail Systems, Compact Holding force 300 N Small can clamp perfectly too: The LOCKED-Family PLK clamping elements are more compact than the Series PL components. They also clamp directly onto the respective linear guide, suit all standard rail sizes from 15 to 55 mm and profiles from the known suppliers and are extremely reliable and space-saving. Thanks to the patented spring steel plate system, the LOCKED-Family PLK achieves clamping and holding forces of up to 2,100 N with the shortest reaction times when vented. LOCKED PLK achieve 100 % clamping force due to the steel pads that are used, even on greased rails. The clamping elements represent the maximum holding forces. Whether in the 4 or 6 bar version, they are good for up to 1 million cycles.
Request for a quoteFRANKE GMBH
Germany
Franke linear modules type FTD are light, compact and ready-to-install positioning units. They are extremely compact and combine the guide system and toothed belt drive within the housing. Franke FTD linear modules can be used universally. They are suitable for long stroke lengths of up to 7 meters.
Request for a quoteBIZERBA SE & CO. KG
Germany
For radiant surfaces Your high-quality machines deserve to be treated with care. Our stainless steel cleaner removes fingerprints and other traces from high-quality stainless steel and other metal surfaces without harming them. Area of Use Meat and bone saws Mincers Tenderizer / strip cutter Price labeling systems Logistics systems Checkweighers Compact and precision scales Load receptors Terminals Highlights Simple and gentle care for stainless steel and other metals High hygiene standard: NSF registration in category C1 Nonfood Compounds Anti-static effect prevents re-soiling
Request for a quoteMINEBEA INTEC GMBH
Germany
The load cell PR 6212 is a state-of-the-art product. This corrosion resistant load cell has a compact design and also features high heat resistance. Its long product lifetime minimises downtime and ensures safer and more reliable processes in the chemical and steel industry. Compact design ensuring a low system height Maximum corrosion resistance High-temperature version available for up to 180 ˚C Load cell capacity range from 500 kg to 10 t Accuracy class: 0.04 % Corresponding mounting kit: PR 6012
Request for a quoteResults for
Compact systems - Import exportNumber of results
173 ProductsCountries
Category