Compact construction - Import export

"for workshop or construction site allows you to Transport, Handle, Turn over any glass surface from floor to ceiling. It can be used with our EV 300 electro-pneumatic lifting beam. Very compact construction. For very easy transport on site, it is possible to assemble it on the site of use"

Activated in a few seconds on site Very robust compact construction •Invertable fork with adjustable width Two Ø 200 mm wheels for easy transport on site • Base equipped with 2 stabilizing arms • Feet with adjustable height wheels Lifting cable anti-torsion in very high resistance steel Level for perfect control of the position of the feet Lifting winch with automatic brake • Steel pulleys on bearings

The light and handy machine for the edge area and the treatment of wooden stairs! It is small, particularly manoeuvrable and therefore also suitable for areas that are difficult to access. With the long attachment, the ELAN can also be used to sand surfaces under radiators. This edge sanding machine is easy to handle due to its light and compact construction. Its manoeuvrability facilitates working in areas that are difficult to access, such as when sanding wooden stairs. The sanding discs can be used both for velcro and for tightening. The ELAN has proven its value with professionals, but is also gladly rented by DIY enthusiasts. Applications with the ELAN: This edge and stair sanding machine is mainly used for sanding wooden floors. Due to its compact construction it is especially popular for the sanding of wooden stairs.

"All our motors have a square frame with a compact and robust construction. A modular design allows a wide flexibility of assembly forms. The motors have a laminated housing, which allows high currents in transit. An insulation system with a higher class than F guarantees a longer life of the motors. They are suitable for a wide range of applications. The motors comply with the international requirements 34-1. The following conditions apply: continuous duty S1 and a DC power supply fully controlled by the drive. Features: - Depending on the application, the motors can be equipped with IC0666 air exchanger or ICW81 air water exchanger. - Predisposition for encoder or tachometric dynamo mounting 20 or 40 or 60V/1000T - On request, the motors can be built to measure to go in place of the existing motors - IP23 protection - Heating class F - In 12-24-48-220-440V - Cast iron - Up to 800kW - B3/ B35/ B5 - Insulation class H - Cooling IC06 - 100 - 355 size"

So that it continues The less than ideal condition of the roads in Europe, as well as the need to catch up in road construction in the Asian world has led to high investments in the construction industry. We have already specialised for many years in the manufacture of compacting bars and pressing bars for road builders. Whether casehardened or inductively hardened bars From us, you will always find a product matched ideally to your requirements.

Thanks to its compact shape and three fixing holes on its underside, the 8526 compression load cell can be used in a variety of applications. With its wide choice of measuring ranges from 0 ... 100 N up to 0 ... 1 MN, it really can cover a wealth of measurement tasks, from the laboratory to use in heavy industry. The integral load button provides an easy and reliable means of applying the force to be measured. Angle errors in the load application with a deviation from the measurement axis of up to 3° have only a minor influence on the measurement signal. For ideal measurement accuracy, the load cell should be mounted on a surface that has been ground and has a hardness of at least 60 HRC. The model 8526 load cell is designed with an internal elastic membrane, to which strain gages are attached. When a compressive load is applied to the load cell, the membrane is elastically deformed and transfers its tension to the strain gages.

Shut off valves suitable for water, petrol and oil application. Very compact construction made of steel or aluminum

The Load cell model 8451 has been developed for measuring the forces that occur during press operation. The internal measuring elements have a rugged design, which mean they can cope reliably with the steep force curves that are typical of press applications. They can be fitted or replaced quickly and easily on the press ram without the need for additional components around them. The force sensor is placed between the tool and the press ram and can thus measure the actual compression force directly in the axis of operation. The load cell measures the compression forces between the circular contact surfaces of plunger and tool. The pin on its top side and hole on its lower face are simply provided for mechanical fixing and centering the components correctly. The connecting cables are suitable for drag chains, designed for many movements and stably fastened in the sensor housing.

Do you need a compact flat bed cutting machine which can be installed and operated quickly and easily? Are you looking for an economical machine which gives full power in a small area? The MetalMaster 2.0 is the economical entry level machine for simple cnc plasma cutting, just oxyfuel or both combined. Thanks to the space saving, compact construction the machine can be installed quickly ready for use. High position speeds and a fast, intelligent torch lifter reduces non-productive times.

Highly torsionally flexible coupling ARCUSAFLEX-VSK for drive shafts * Linear torsional deflection characteristic * Elements available in different torsional stiffnesses * Enhanced damping capacity through frictional damping * Maintenance-free coupling bearings * Radial bearing close to the cardan joint * A variety of designs for different cardan shaft configurations * Many types with SAE connection dimensions or as specified * Compact construction, the highly flexible element being protected by the housing * Fail-safe device visible from the outside for ease of inspection

Flow-through Chillers are designed for simple, low demand cooling applications. They are commonly used in combination with heating circulators to remove heat in order to cool a process back to room temperature. Cooling of fluids Ideal for counter-cooling or as a replacement of cooling water Compact, space-saving construction Robust housing with carrying grips Environmetally friendly with natural refrigerant

This, related to its measuring range, miniaturized load cell enables an universal and reliable operation in industries and laboratories. It is well suited for compression measurements in very restricted structures. The load cell is a compact construction and made of superrefined steel. Therefore it can be used in many fields of industry, like. Examples are: — Press-in force measurements on longitudinal and transversal connections — Compression force measurements on punch and roller applicancy — Spring tension measurements on shock absorbers for cars — Contact pressure determination in push rods — Compression force measurements on compressed-air knee-lever presses Thanks to the rounded top, in shape of a little hat, the force to be measured is led into the sensor centrically and free of lateral force. Specific characteristics: Very small dimensions Drug chain qualified cable Made of stainless steel burster TEDS optionally available

Flow-through Chillers are designed for simple, low demand cooling applications. They are commonly used in combination with heating circulators to remove heat in order to cool a process back to room temperature. Cooling of fluids Ideal for counter-cooling or as a replacement of cooling water Compact, space-saving construction Robust housing with carrying grips Environmetally friendly with natural refrigerant

The dispenser based on the ViscoTec endless piston principle is particularly suitable for the filling, dosing or application of viscous, abrasive, highly filled or shear-sensitive materials. There are three different versions of the volumetric dosing system: 3VHD8, 3VHD12 and 2VHD12. Important key data: - Withdrawal option (no dripping or thread pulling) - absolutely linear relationship between rotor speed and spread rate - long service life due to media-specific component selection - quick and easy disassembly/assembly - Sealless, easily dismountable rotor string - process-safe and high-precision filling/dosing - variable quantities infinitely adjustable - compact construction Hygienic features: - Design according to EHEDG guidelines - FDA-compliant design/development - hygienic and pharmaceutical design - Interior with optimised dead space - all surfaces Ra ≤ 0.8 μm - rinsing connection for automatic cleaning

INDIRECT (VIA STORAGE MEDIUM) OIL HEATER FAN IDS 900The IDS 900, our most powerful model of this series of mobile indirect oil heaters, provides the strongest mobile heating power The greatest model of the IDS series was especially designed for heating individual halls or several rooms and comes equipped with a flow-optimized stainless steel combustion chamber for a particularly high efficiency and with an exceptionally powerful axial fan. The compact construction comprises a robust, epoxy coated steel frame with double-walled housing for optimum soundproofing and insulation. Function related, the delivery of the oil heater fan IDS 900 does not include an integrated fuel container, which is why the use of an external tank is recommended for automated continuous heating. Optionally available is also an oil tank pedestal with a capacity of 208 litres.

NIR– Laboratory measurement device, for liquids of different consistencies Description The HK12 is an NIR (Near Infrared) laboratory measurement device with state of the art technology. Which can measure all organic components in liquids of different consistencies. With only one measurement you can measure simultaneously all valuable components like fat, protein, lactose, water, etc. Through the simple sample preparation, the light and compact construction of the HK12, it is ideally suitable for laboratory operation. With the easy to use calibration function, our customer can take spectra's at the device and read the internal stored spectra with the calibration software. Due to this function, our customers can expand independent or with our help an existing calibrations or create new calibrations.

The highly torsionally flexible ACRUSAFLEX-VSK coupling is used in a drive train when a large shaft displacement or an extended distance between the drive and the driven components must be compensated. Depending on the arrangement of the drive train components, a non-uniform motion of the speed may result, and since cardan shafts exhibit some torsion flexibility, the mass of the prime mover and driven machine may induce a resonant system. Advantages of the highly tosrionally flexible ARCUSAFLEX-VSK couplings: Linear torsional deflection characteristic Elements available in different torsional stiffnesses Enhanced damping capacity through frictional damping Available in 9 sizes: from 390 Nm to 20.000 Nm Maintenance-free coupling bearings Radial bearing close to the cardan joint •A variety of designs for different cardan shaft configurations •Many types with SAE connection dimensions or as specified •Compact construction, the highly flexible element being protected by the...

The SYSTEM-T fully automatic Form-Fill-Seal (FFS) packaging machine combines high quality packaging from a PE tube with high production capacity and is therefore ideal to be used in a wide range of industries including petrochemicals, fertilizers, animal feed, food,... Due to the high flexibility of the FFS packaging machine it can be adapted to different customer requirements. For example, pillow bags and gusset bags can be produced with or without carrying handle and a filling weight between 5kg and 50kg. Additional perforation of the bags is also possible. The SYSTEM-T stands out due to its modern design and a very sturdy and compact construction. Accessibility, generous clearance, long maintenance intervals and low maintenance costs were of major importance in the development of this machine. For example, the large doors offer easy access to all areas and important parts and cable connections are protected from corrosive and aggressive dust by stainless steel housings.

NIR– Laboratory measurement device, For solid and pasty products Description The HK11 is an Stand– Alone NIR (Near Infrared) laboratory measurement device with state of the art technology. Which can measure one organic component like fat, protein, water, collagen, etc. in solid and pasty products. Through the simple sample preparation, the light and compact construction, is the HK11 suitable for the use in the laboratory or as AT– Line measurement device. With the easy to use calibration function, our customer can take spectra's at the device and read the internal stored spectra with the calibration software. Due to this function, our customers can expand independent or with our help an existing calibrations or create new calibrations.

The braking fluid thermocouple from Therma convinces not only with its compact construction but also with its simple installation. Just screw it in in-place of the air vent screw to measure the temperature of the brake fluid. The subsequent sheathing line can then be comfortably bent in the required direction. When the thermocouple is screwed in, the braking system is then vented through its thread. The temperature measurement of the brake fluid, along with the brake disc surface measurement, also supplies important control values for a successful and safe race. During long races or races with many downhill routes, the brake disc overheats over-proportionally. The accruing radiation heat during this has a direct effect on the brake fluid, respectively heats it up. Depending on the type of brake fluid being used, it already reaches its boiling point at approx. 140–260 °C.

This sensor for measuring exhaust gases was developed together with a Formula 1 team. The goal was to achieve the greatest possible reliability during the race. The sensor was designed so that it can withstand a maximum of vibrations and extreme temperatures while being made in a highly compact construction at the same time. The special feature is the connection lead. It is not made from the usual mineral-insulated stainless steel sheathed line, which is too rigid and which tends to vibration fractures. Instead, the line is made of stranded conductors with PTFE insulation and an additional heat shield so it can be easily and flexibly adapted to the environment. The sensor is being used with exceeding success by professional teams in long distance races, American race series and the domestic DTM. The benefits: Highly vibration-proof Very robust High temperature resistance (up to 1,200 °C) Individual plug assembly possible Can be individually adapted

Flow-through Chillers are designed for simple, low demand cooling applications. They are commonly used in combination with heating circulators to remove heat in order to cool a process back to room temperature. Cooling of fluids Ideal for counter-cooling or as a replacement of cooling water Compact, space-saving construction Robust housing with carrying grips Environmetally friendly with natural refrigerant

NIR– Laboratory measurement device for solid and pasty products Description The particuLAB is an NIR (Near Infrared) laboratory measurement device with state of the art technology. Which can measure all organic components in solid, pasty and powdery products. With one measurement you can measure simultaneously all valuable components like fat, protein, collagen, water, etc. Through the simple sample preparation, the light and compact construction, is the particuLAB suitable for laboratory measurements and AT– Line measurements. With the easy to use calibration function, our customer can take spectra's at the device and read the internal stored spectra with the calibration software. Through this function, our customer can expand independent or with our help an existing calibrations or create new calibrations.

In connection with very precise digital voltmeters the model 1282 resistors are used as measuring resistors for accurate registration of direct and alternating currents up to 200 A. The compact construction supports universal application. The exceptional low temperature coefficient extends the scope of application a second time. A typical application is the wide range of quality and reliability testing. Regular measurements give a reliable information of the quality level of parts, instruments and systems. Technologies already approved with our precision and calibration resistors - which especially guarantee a secure conduction of the dissipation heat - have been transferred to the precision high capacity resistors. Features: — Temperature coefficient ≤ 10 ppm/K — Nominal load 20 W — Ranges 1 mΩ ... 100 mΩ — Four-terminal measurement principle — Accuracy 0.02 % — For technical frequency 50 Hz

The Kuhnke CIO compact I / O connects various input and output signals in a compact housing for the DIN rail. The process data are made available via the CANopen interface according to the device profile CiA 401 of the higher-level control system. The robust design makes it suitable for use in machine and apparatus construction.;Compact control cabinet module; integrierte I/Os: 16DI/16DO/4AI-I/4AI-U/4AO-I/4AO-U/6Pt100/2Thermo; CANopen fieldbus interface

AViTEQ Vibrating table can be used both for compression and also for loosening bulk material. Typical applications are compacting of e.g. concrete mixes or the unstick/knock out of molds. There are two different approaches: The load to be vibrated, is set loosly on the table or firmly clamped to the vibrating device. Advantages & benefits variable, can be used for different tasks easy to regulate with magnetic vibrator Construction Compact design, with attached magnetic vibrator/s or unbalanced motors below the tabletop. Selection The sizing depends on: bulk material, such as bulk density, particle shape and internal friction the properties of the container, such as height, stiffness and sidewall Key figures length: up to 4,000 mm width: up to 2,000 mm payloads: up to 3,000 kg drive: magnetic vibrator, unbalanced motor, exciter

The MA508/1 magnetic display is the optimized successor of the MA508 magnetic display. Now, the magnetic display can be freely programmed via the integrated keyboard, for example for parameters such as resolution or offset.The compact dimensions enable simple constructive integration even under confined installation conditions. The metal housing guarantees durability and robustness. Display accuracy max. 0.01 mm. Repeat accuracy 0.01 mm. Low-power LCD with integrated sensor. Supply via integrated battery with up to 10 years of service life. Freely programmable directly via buttons on the device.

Working range Sets speed rivets up to Ø 4.8 mm aluminium and Ø 4.0 mm steel. Suitable for speed rivets with a mandrel length between 483 mm and 510 mm. Further lengths available on request. Technical data Traction power: 3,500 N Stroke: 26 mm Operating pressure: 5-7 bar Air hose connection: 6 mm Ø (1/4“) Weight: 1.8 kg Equipment Spreader nosepiece in working position Tag on device head Rubber foot Advantages • Quick setting process, fast rates • Safe working through disposable mandrel and optional automatic switchoff • Ergonomic handling for fatigue-free work • Light and compact design • Modular construction based on the TAURUS® design • Softgrip • Tool-free conversion

Working range Sets speed rivets up to Ø 6 mm of all materials. Further lengths available on request. Technical data Traction power: 6,000 N Stroke: 30 mm Operating pressure: 5-7 bar Air hose connection: 6 mm Ø (1/4“) Weight: 2.0 kg Equipment Spreader nosepiece in working position Tag on device head Rubber foot Advantages • Quick setting process, fast rates • Safe working through disposable mandrel and optional automatic switchoff • Ergonomic handling for fatigue-free work • Light and compact design • Modular construction based on the TAURUS® design • Softgrip • Tool-free conversion