Coil tube - Import export

ECU 99,9 % : Electrolytic is used as copper material with a conductivity of 58, electrode in erosion, high-low current panel and busbar in substations. Among our standard products: Rod, Sheet Plate, Straight pipe, Tube Coil, Box profile, Grounding rod - plate, Roofing, Copper fittings and thin wires. Also, sheet plate measurements which do not have a standard are brought to necessary measurement by forging at desired dimensions.

Tubes in coil

Major players in both the aerospace and nuclear power industries rely on Superior Tube for precision tubing to protect their control systems and instrumentation. Meanwhile, control and measuring devices critical to the safe functioning of nuclear reactors also require our high quality tubes. Within reactor cores, our instrumentation and control tubing encases equipment for monitoring various factors such as pressure, temperature, density differences and fuel burn up rates. It’s an extremely demanding environment where durability and reliability are absolutely critical. Superior Tube supplies instrumentation tubing in straight and coiled tube forms. The most common materials used are special grades of stainless steel and nickel alloys. Superior currently produces instrumentation tubing from up to 1.5” in outside diameter down to less than .020” OD. Please note that we have a minimum order value of £10,000.

Pancake coiled copper tube which is named for its coiled style, is widely used on the connecting for the separated air-condition. On the other hand it is used in water distribution systems, chilled water mains, drainage and vent systems, heating systems (includingsolar), fuel-oil systems, oxygen systems also in non-flammable medical-gas systems. They are produced that Copper fluid is casting to the billet moulds and follows to the extrusion press, after annealed tubes are drawing, to be copper tubes. They are according with DIN EN 1057, DIN EN 13348, DIN EN 13600, ASTM B280, ASTM B68, ASTM B75, TS 380

Category Compressed-air technology / Compressed-air hoses / PA, PU, PE Pipes / Polyamide pipe / PA 12, black Product number supplier 67209101

TRIS supplies tubes of various specifications and steel grades for petrochemical plant construction. TRIS has supplied not only straight tubes but also Seamless Coiled tube with longer length. The seamless coiled tubes have many benefits with reducing welding pointsand minimized the leakage points and helping to reduce the construction period in dramatically. In 2013, TRIS developed the Seamless Coil Tube. Now, TRIS can handle various steel grades such as 904L, C-22, Incoloy825, Super Duplex etc. of Coiled Tube and Straight Tube. The longer length of Nickel alloy coiled tube is usedfor chemical injection, hydraulic control, gas detect line etc. in Oil & Gas industry. In addition to the heat exchanger tubes of TRIS of chemical plant used in severe environmentsprovide the most efficient operation conditions by stable quality control and various Ni alloys.

Temperature control of liquids Tube coil heat exchangers (so-called tube cooling coil heat exchangers) are generally used to control the temperature of liquids. This system can also be used to heat or cool liquids in a controlled manner. Due to their special shape, pipe coil heat exchangers are sometimes also called hairpin heat exchangers. Inexpensive applications The simple and solid structure enables it to be used in cost-effective applications. Coiled tube evaporator systems are ideally suited for brine and glycol applications. Classic variant Coiled tube evaporator systems are a classic and proven variant in the field of heat exchanger systems. Coiled tube heat exchangers are often used in ice storage systems or in the production of cold water units. In ice storage systems, coils can be used to achieve an even build-up of ice around the coils.

Hydrogen is an important resource that is now expanding into various fields. In particular, hydrogen vehicles require a high-pressure gas environment and have strict requirements to meet it. TRIS produces and supplies products that customers require based on the understanding of using environment. <Company Information> Tris Tube Co., Ltd is a manufacturer of precision seamless and welded tubes. The products are supplying to the various industries such as Oil&Gas, Semiconductor, Automotive, Shipbuilding, food and beverage and Gas with high pressure (Hydrogen Gas station) The products are supplied with Straight tube and Coiled tube.

Industrial or spiral hoses with an integrated heating system, complete with temperature sensor and controller. This version is extremely robust at a low weight. Especially suitable for outdoor transport tasks with solid and liquid media. Temperature resistant from –40°C to +220°C depending on the application. Construction: Special quality tube Heating coil Tension and pressure-resistant fabric inlays Optional: Concealed steel spiral Abrasion-resistant, weatherproof cover Interior and exterior smooth, fabric patterned or corrugated In fixed lengths. Heated hose systems are manufactured to customer specifications. Please coordinate the operating conditions with us when enquiring. SIMON-heated hoses serve only to maintain the temperature of the medium, not for heating during ongoing flow. Other versions and dimensions on request.

Medical-grade, Biocompatible PEEK Polymer Materials Our medical-grade PEEK shaft liners are designed to ensure safe and reliable delivery of medical liquids. These PEEK tubing liner are made from durable and corrosion-resistant polyetheretherketone polymer material, and reduce friction and wear during delivery. Invest in the safety and reliability of your medical liquid delivery system with our high-quality PEEK shaft liners. Key Features of PEEK Liner Tubing: • Ultra hard material • Very good chemical resistance • Stable at temperatures up to 228°C • Excellent abrasion resistance • Flame retardant (UL94 V-0) • Very tight dimensional tolerances PEEK Tubing: • In coils, on spools or straight lengths with clean, square cuts • Translucent or Opaque • Wall thickness varying along length (Bumped tubing) • Coloured PEEK tubing • Multi-Layer PEEK tubing • Reinforced PEEK tubing (Stainless Steel Wires) • Shaped tubing

CSN® EXPLOSIONPROOF SPACE HEATERS CSN® explosionproof space heaters are used for heating zone 1 and 2 hazardous areas. Standard devices are available in the common temperature classes T1 to T4; temperature classes T5 and T6 can be offered on request. The use of finned tubes for the CSN® explosionproof space heaters is the most economical solution for heat transfer in the field of electric heaters. By coiling corrugated helical fins on tubes of different alloys, we obtain extremely large tubes surfaces and, consequently, low temperatures on their surfaces. We use this interaction to produce explosionproof space heaters on a highquality level. CSN® explosionproof space heaters with coiled fins are intended for horizontal mounting and suitable for both wall and floor mounting (for permanent installation)

Explosionproof/flameproof gas preheater EEx d -ATEX und IECEx zertifiziert In general a cooling down takes place at expansion of gases whilst a heating takes place at compression. Typical gases are carbon monoxide, natural gas and air. The temperature change, which occurs at expansion of gas or gas mixture from a high to low pressure i.e. after a gas pressure control is called Joule-Thomson effect. In order to prevent the effects of Joule-Thomson as icing or condensate separation, the gas will be heated up before expansion. The gas pre heaters are suitable for all kind of gaseous media (i.e. air, natural gas, technical gases, fuel gas) and low flow process applications, suitable for pressures up to 300 bar. The “Cast electric heaters” type flameproof electrical gas pre heaters are certified for use in zone 1 or 2 hazardous area, custom built to meet client specification. The gas pre heater consists of a process tube coil and an electrical heating bundle, casted in aluminium. The process gas flows through the tube coil and is heated by the aluminium block that provides the heat transfer. This indirect electric heating gives an accurate control of the process and eliminates pressure vessel design and associated costs.

ECU 99,9 % : Electrolytic is used as copper material with a conductivity of 58, electrode in erosion, high-low current panel and busbar in substations. Among our standard products: Rod, Sheet Plate, Straight pipe, Tube Coil, Box profile, Grounding rod - plate, Roofing, Copper fittings and thin wires. Also, sheet plate measurements which do not have a standard are brought to necessary measurement by forging at desired dimensions. Parts that require CU-Cr-Zr (Chromium alloy) High electricity conductivity, hardness and strength at high temperatures: Are used as point welding electrode and seam welding disc at the source of low carbon steels (Panel radiator, Gasoline warehouse, etc.) and Galvanized steel plate (Automotive and white goods), electrode holder at spot welding machines, plunger electrode at erosion machines and contact busbar at substations.

KAUP Carrying Rams T185 in steel tube version can be found on forklift trucks wherever tubes, coils or other material wound on cores are transported. Carrying Rams with capacities of up to 80 tons can be found in the KAUP product range.

Drycoolers are simple and reliable equipment. Their principle of operation is based on a sensible heat exchange between air and water where: air is drawn in by fans through a finned coil, while water (or a mixture of water and glycol) flows through the tubes that make up the coil and cools when ambient air (colder cooler) laps the surface of the latter. Exchange coils, with a "V" arrangement within the cooler, consisting of copper tubes and aluminum fins. The angle between the coils, the diameter of the tubes, and the thickness and length of the fins, are sized to ensure the best heat exchange performance, for a given fluid and air flow pressure drops.

LWCand Pancake coiled copper tube which is named for its coiled style, is widely used on the connecting for the separated air-condition. On the other hand it is used in water distribution systems, chilled water mains, drainage and vent systems, heating systems (includingsolar), fuel-oil systems, oxygen systems also in non-flammable medical-gas systems. They are produced by horizantal casting after annealed tubes are drawing, to be copper tubes. They are according with DIN EN 1057, DIN EN 13348, DIN EN 13600, ASTM B280, ASTM B68, ASTM B75, TS 380

The copper tubes manufactured by us are extensively used in AC & R (industry Air Conditioning and Refrigeration). Applications Of Copper Tube : • Water distribution systems • Chilled water mains • Drainage and vent systems • Heating systems(includingsolar) • Fuel-oil systems • Oxygen systems • Non-flammable medical-gas systems etc. Some of the reasons for using copper in mechanical tube systems are: • Versatility • Easy to join and install • Wide range of sizes • Problem-free performance • Long lasting and maintenance free • Corrosion resistance • High thermal conductivity • An abundant resource They are produced that Copper fluid is casting to the billet moulds and follows to the extrusion press, after annealed tubes are drawing, to be copper tubes. They are according with DIN EN 1057, DIN EN 13348, DIN EN 13600, ASTM B280, ASTM B68, ASTM B75, TS 380.

The open type condensing unit models are remote chiller open, non-faired condensing units that are ideal for inclusion in industrial refrigeration systems. All models have been built around a robust base in welded sections, on which the hermetic, scroll and semi-hermetic compressor, the condenser and the liquid receiver with connection pipes are mounted. Mostly using for display cabinets and cold rooms General Specification Zinc-plated steel case frame Hermetic, scroll or semi-hermetic type compressor Air-cooled condenser with fan motors Air fan guard made of plastic or metal Power supply cable Condenser coil made of copper tube and aluminum fins Condensing unit supplied with nitrogen holding charge

or the service of installation technicians, eid exercises strict quality control on the copper, coils, bars, REFNET® refrigerant tubing. Here are a few explanations: THE TECHNICAL PROBLEM Technical performance of the air conditioning and refrigeration systems with the new refrigerant fluids (R410A, R32, etc.) is considerably reduced by the effect of the residual mineral oil used in the manufacture of ACR tubes ACR, used for heat exchangers and refrigerant tubing. THE SOLUTION Installing SUPERCLEAN tubes guarantees less residue inside the tubes. The internal residue ratio, defined as 0.1 mg/m, is only one sixtieth of that of conventional tubes. This means that there is no need for future cleaning of the exchangers and tubing, thus increasing the performance of the air conditioning and refrigeration systems. Our copper is manufactured using Grade A cathodes.

The wide range of product portfolio of coils with different tube diameters, tube patterns, fin profiles, materials and options allows us to customize our coils for any specific application and fluids: air heaters, air coolers, condensers and evaporators for HVAC and various industrial applications. Kelvion heat exchanger coils are manufactured with copper tubes and aluminum or copper fins. The fins are equipped with special profiles developed at our R&D department enhancing heat transfer and keeping pressure drop at a moderate level. The customized fin spacing is achieved by collars which also provide the contact between the fin block and the tubes. Mechanical expansion of the tubes guarantees a perfect bond between the fins and the tubes leading to maximum heat transfer between both fluids.

The welding process is one of the core ways in which we manufacture precision tubes. Our high-quality tubing starts off as a flat strip of metal. The strip is formed into a tube through a series of rollers and the join, also called the seam, is then welded together. Welded Processes Special non-destructive testing methods – including eddy current, ultrasonic and pressure testing - are used to ensure a consistent weld. Just like with seamless manufacturing, welded tubes can be drawn down by plug drawing or sinking. This method can be used to create very long lengths of coiled tube, these can also be measured during coiling using a laser measurement. The main welded tube manufacturing processes used are strip welding and cold drawing, but other important processes in between, or at the end of the drawing process, include Please note that we have a minimum order value of £10,000.

Finned or bare tube coils for air - gas heating or cooling (heavy duty) Shell and Tube Heat Exchangers | Air Coolers, Air Heaters, Pressure Vessels | Gas cooling in pneumatic conveying systems | Air cooling in industrial refrigeration | Air drying in textile machines | Air heating &amp; cooling in HVAC systems | Coolers for A.C and D.C motors | Coolers for power transformers | Diesel and gas engines water cooling | Air preheaters for boiler plants | Economizers for steam, oil and hot water generation | Hydrocarbon condenser | Industrial process water cooling | Inter and after coolers | Oil cooling in lubrication system | Solvent recovery by condensation | Steam condenser

– Connection cable 4 meters with plug – Sieve installed in the water inlet – Bypass incl. Pressure gauge installed in the device – Float switch installed for low water alarm – MicroGroove condenser (micro-channel filter, as sensitive to dirt) Terminal– Evaporator: copper plain tube coil – A series for min. outlet temperature of -5 ° C. – Many possible configurable and already assembled e.g. overflow protection – Made in Germany!