Coated coverings - Import export

Engineering and Construction

Self-levelling cement mortar modified with additives that give it the ability to be fluid and pumpable, especially for screeds and levelling of coatings with a thickness between 5 mm and 20 mm that, once hardened, must be covered with coatings. USES Applicable on concrete or cement mortar substrates, on low porosity substrates, apply previously a Fixmar Primer GR bonding primer. Regularisation of continuous screeds. Ideal in situations where a flat surface is required as a support for the subsequent application of another type of coating, such as parquet, carpet, ceramic tiles, linoleum, ceramic materials, marble... Suitable for underfloor heating and as a finishing material for synthetic coatings. Not suitable for wear surfaces.

TECHNICAL DEFINITION SEMIN AIRLESS COVER is an indoor coating that can be Airless sprayed. COMPOSITION AND APPEARANCE Acrylic emulsion resin, mineral content, cellulose derivatives, preservation agent and various additives. The resulting paste is white and its consistency is adapted to its airless application. ACCEPTED SUBSTRATES • Fair-faced concretes. • Plasters boards. • Old droplets • Porous concrete PACK SIZE 25 kg. Plastic bags and tubs. SUITABLE SURFACES The SEMIN AIRLESS GARNISSANT layer can be applied with the help of an acrylic or gloss paint. TECHNICAL CHARACTERISTICS • Dry extract : 72% • Density : 1;88 • COV : < 1g/ litre APPLICATION SEMIN AIRLESS covering layer is sprayed in two steps : the first must be smooth with the help of a 60 cm blade, after drying the second one must be smoothed with the blade. The product must be sprayed at about 80 cm from the support. TIP : Lift filters before spraying.

TECHNICAL DETAILS Powder filler for all types of interior filling work on uneven substrates. SEMIN HIGH BUILD FILLER has very good filling properties. SUITABLE SURFACES All types of interior surfaces: bubbled concrete, untreated concrete, cellular concrete, irregular plaster, heating ceiling, terracotta tiles, uneven substrates... Covering After the filler has dried completely, suitable for covering with all types of plaster-based coatings, thick coatings, wall paper paste, wall coverings. REFERENCE DOCUMENTS • Filler complies with standard NFT 30 608 • DTU 59.1 : painting work • Technical notice CSTB N°9/99-681 TECHNICAL CHARACTERISTICS • Granulometry : up to 0.5 mm • Adhesion : complies with NFT 30 608 • pH : neutral • Usage time for batch : 24 hours PACK SIZE 25 kg bags on shrink-wrapped pallet. APPLICATION May be applied manually with a smoothing trowel or coating blade, or mechanically by spraying then manual smoothing. THICKNESS OF APPLICATION Up to 5 mm in one pass.

TECHNICAL DETAILS Powder filler for all types of interior filling work on uneven substrates (rough precast concrete, for instance). COMPOSITION AND APPEARANCE Plaster-based powder coating containing calcium carbonate, resin and various additives. The mixed paste is white in colour. SUITABLE SURFACES Interior walls and ceilings: Bubble concrete, bare concrete, cellular concrete, irregular plaster, heating ceiling, uneven surfaces, etc. OVERLAYING After the filler has dried completely, suitable for covering with all types of plaster-based coatings, thick coatings, wall paper or wall coverings. TECHNICAL CHARACTERISTICS • Granulometry : Up to 0.2 mm • Adhesion : complies with NFT 30 608 • pH : neutral PACK SIZE 5 and 25 kg bags on shrink-wrapped pallet. STORAGE 9 months in unopened original packaging stored away from moisture. PREPARATION OF SURFACES Surfaces must comply with DTU 59.1, i.e. be clean, dry, dust-free and free from all traces of form oil.

TECHNICAL DEFINITION Interior finishing plaster. Can be used with Airless spray. It provides a fine, uniform and even finish and is easy to sand. COMPOSITION AND APPEARANCE Water, calcium carbonate, resin and various additives. The resulting paste is off-white in colour. COVERINGS Primer coat, paint, wall coverings. TECHNICAL PROPERTIES • Density : 1.8 • Dry extract : 73% STORAGE 18 months in original unopened packaging away from frost and high temperatures. PREPARATION OF SUBSTRATES. Substrates must comply with the DTU 59.1 standard i.e. be dry, clean, dust-free, hard and free of any trace of separating agent. Scrape, brush and remove dust from concrete, plasterboard and plaster tiles. APPLICATION Manual application : With a trowel or filling knife. Mechanical application : Airless and spraying machine. In cold weather, mix the product quickly to aid aspiration. We recommend removing the filter from the pump, spraying at about 80 cm from the substrate.

TECHNICAL DEFINITION Ready-to-use surface filler paste for filling interior holes and cracks. COMPOSITION AND APPEARANCE Water, calcium carbonate, sand, resin and various additives. SUITABLE SUBSTRATES All types of interior substrates : concrete, cellular concrete, cement, breeze block, brick, plasterboard, plaster tiles, plaster, old paint. COVERING Primer coat, smooth surface filler, wall coverings, paint REFERENCE DOCUMENTS • Filler meets EN 16566 standard • DTU 59.1 : Paint work TECHNICAL CHARACTERISTICS • Density : 1.5 • Dry extract : 82 % STORAGE 9 months in original unopened packaging away from frost and high temperatures. PREPARATION OF SUBSTRATES Substrates must comply with the DTU 59.1 standard i.e. be dry, clean, dust-free, hard and free of any trace of separating agent. APPLICATION Applied by hand using a filling knife or spatula. The thickness is 2 cm; to fill deeper holes, build up the filler in several steps The maximum thickness will be 1 cm per coat.

Especially by our research and development work we have succeeded in creating various permanent anti-sticking coating systems. The distinctive deep-drawing properties paired with thermal resistance allow it to be used in a wide range of applications. From façade coating and device covers in industrial engineering to household products, such as sliding surfaces for shavers. There are hardly any limits for our application possibilities.

Do you need to protect sensitive equipment from extreme climate conditions? Or do you need to store goods without the risk of them getting detected? Our fast opening domes are designed to offer instant protection and shelter. Our domes are operated by an electric gearbox, and fitted with a manual safety system. This enables them to open extremely fast, in less than a minute. They can open in either single or dual mode (both ways). They are composed of a galvanized steel frame and a heavy-duty PVC-coated fabric cover. Our protective domes are available in standards diameters of 9, 11, 13, 16 and 20 meters. We can adapt their design to match local wind and snow load requirements, so your goods are always well protected.

The profiled guide slide PFS is available in 5 series with sizes from 100 mm up to 425 mm width and strokes up to 2000 mm. To protect them against dirt accumulations, the slides are covered with bellow covers. Other covers on request. The slides are available in aluminium (nature anodized), or casted iron GGK-25. Optional steel C-45. The ball thread spindle drives are available in the qualities T5 and T7 with spindle pitches from 5 to 50 mm. PFS (basic equipment) ball screw spindle acc. to standard type allocation screwed up bellows cover coated on both sides integrated inductive limit switches (PNP break contact) incl. plug-connector in the endplate

5 metre flexometer with metal blade and locking mechanism. With soft body in varied colors, coated with protective cover made of resistant rubber, metallic clip for belt and carrying belt. With special die-cut for doming and presented in an individual box. With Brake and Clip Included

3 metre flexometer with metal blade and locking mechanism. With soft body in varied colors, coated with protective cover made of resistant rubber, metallic clip for belt and carrying belt. With special die-cut for doming and presented in an individual box. With Brake and Clip Included

Free Standing Modular Cabinet, 2.5mm Galvanized mild steel Body Single-door and Double-door Epoxy-Polyester Powder Coated covers Demounted shipment possibility Easy to assemble modular design Flexible cabling and Bus-Bar solutions Assembly accessories suitable for different Switchgear brands Panel solution for medium voltage switchgears Low voltage distribution panel solution Modular and Monoblock Plinth Option Panels with high protection class up to IP54 Engineering support Project-based special design and production

Technical Features Suitable for anodized production Minimum diffusion, maximum reflection Maximum energy saving in lighting products Areas of Use Lighting reflectors Decorative use Suspended ceiling Showcases, display areas Coating Our products are covered with a single-sided protective film

Polyester based paint Pvdf based paint Plastisol based paint Polyurethane based paint Coating Our products are covered with protective film Color RAL color chart

Our event designs are: Strength and durability - Reliable LVL timber, wood impregnated with fire-resistant compounds Robust design - Developed taking into account all the loads of lighting & sound equipment required for placement in a tent Aesthetic appearance - Due to the attractive shape & the use of natural wood Quick and easy installation - Thanks to the patented connection unit of the prefabricated structure, installation of a wooden tent takes several hours Different types of coatings - You can choose awning covering, soft roofing or glazing Compact - Unassembled, wooden the tent has small details & is easy transported Versatility - For events of any size, from family celebrations to large city events Custom design - We will take into account all your needs and develop the best solution Ideal for: Wedding celebration, Business, sport or cultural events, Restaurant business, Festivals and concerts, Exhibitions and fairs, Picnics & barbecue, Tourist business, Private parties

AYA luxury cutting boards- Available dimensions: 250x180x15mm, 300x200x15mm, 450x250x15mm, 565x140x15mm, dia.220x15mm Purpose:for cutting, for serving, to personalise, as a gift, as a kitchen accessory. Manufacturer: Ryba Wooden Products. Origin of the product: The product comes from Poland and is made of thermoash hardwood. Coating: The board is covered with vegetable oil which enhances the colour and protects it from external factors.Thermo treatment process comes from Finland. Polish ash wood is treated with heat (200-240 Celcius degrees) and steam. DARK COLOR OF WOOD is an effect of sugar molecules break. This kind of processed wood is often used for covering houses.

Large motorized projection screen from 8 to 25m wide. Bottom roller motorized screen. Black powder coated aluminium housing covered with black fabric flame resistant M1. Fully compatible with all type of PVC screen materials, including 3D projection surfaces ! Bottom roller motorized screen (olio screen) equipped with an aluminium rolling tube of 206mm diameter for width up to 13m. Rolling tube made of carbon fibre tube 255mm diameter for width bigger than 13m. Somfy radio remote control supplied as standard. The screen is protected inside a square H 80 x L 40 cm open aluminium casing covered with black trevira CS fabric flame retardant permanent. Antigiratory stainless 3 or 4mm diameter cables. Fixing method : Heavy duty triggers clamps, ceiling or wall fixing brackets. Other type of fixing could be designed on request. Hoist : Somfy CS 200 motor integrated on center part of the housing. Single phase 240V 16Amp. Constant speed: 30 rpm/minute Rising speed: approximately 15...

Large motorized projection screen from 8 to 25m wide. Bottom roller motorized screen. Black powder coated aluminium housing covered with black fabric flame resistant M1. Fully compatible with all type of PVC screen materials, including 3D projection surfaces ! Bottom roller motorized screen (olio screen) equipped with an aluminium rolling tube of 206mm diameter for width up to 13m. Rolling tube made of carbon fibre tube 255mm diameter for width bigger than 13m. Somfy radio remote control supplied as standard. The screen is protected inside a square H 80 x L 40 cm open aluminium casing covered with black trevira CS fabric flame retardant permanent. Antigiratory stainless 3 or 4mm diameter cables. Fixing method : Heavy duty triggers clamps, ceiling or wall fixing brackets. Other type of fixing could be designed on request. Hoist : Somfy CS 200 motor integrated on center part of the housing. Single phase 240V 16Amp. Constant speed: 30 rpm/minute Rising speed: approximately 15...

SANDWICH PANEL WITH OUTER COATING IN WHITE AND EDGES COVERED WITH REFLECTIVE ROAD TAPE.