Co2-neutral - Import export

We offer TER Floc Vegetalbased flocculants In guaranteed quality, at stable prices and packed appropriately for transportation. Do you need advice on choosing your product or are you looking for a suitable substitution? Our application and product experts are happy to help! Our experience and deep knowledge in the area of specialty chemicals and ingredients ensures that we are well positioned to effectively support both our customers and our suppliers with product and application expertise. Please contact us for more information!

Biogenic or carbon-neutral stack CO2 gas can be deductible from any company’s greenhouse gas inventory which is required for reporting under various regulations.

Promix gas dosing stations for physical foaming have been specially designed and developed to meet the needs of foam extrusion. Promix gas metering technology is characterized by high dosing accuracy, reliability and amazingly simple operation. Promix gas dosing stations meet all the requirements of a modern gas metering system for foam extrusion. These include high-precision mass flow control, process visualization by means of trend charts, operator-definable operating limits, data acquisition, and synchronization of the dosing rate with the extruder output. Implementation in the extruder control system via fieldbus system is also possible. •,Mass flow from 1 g/h up to 20'000 g/h •,Dosing pressure up to 680 bar

Promix supplies key components to optimize the production of light foams such as XPS insulation boards, XPET construction boards, XPE foam films, etc. Thanks to the improved cell structure, the foam density can be further reduced, and the throughput of the plant increased, resulting in significant cost savings in production. Replacement of iso-butane for the sake of the environment Iso-butane and other hydrocarbons are excellent blowing agents for high expansion foam production.However, they are also highly harmful to the environment and highly flammable, which increases the production risk. Promix gas dosing stations in combination with other retrofittable process engineering components enable at least a partial switch to the non-flammable and environmentally neutral gases CO2 and nitrogen. Your optimization potential ,Improved mechanical product properties ,Lower foam density ,Replacement of hydrocarbon blowing agents with CO2 and nitrogen ,Increased line throughput

We are happy to realise according to your requirements individual products or implement corporate identity concepts for your employees. employees. You benefit from our certified suppliers suppliers and our many years of experience both in collection design and in individual products. We work with you to develop a design concept, produce the prototypes and accompany the complete process of the value chain up to to delivery. You always have an insight into the process of your new workwear - whether it is normal normal workwear or standardised protective clothing protective clothing, e.g. high-visibility EN ISO 20471. Talk to us, we open up possibilities. Sustainability Means for us: - CO2 neutral production thanks to solar energy (own photovoltaic plant) - Certified supply chain - Short supply chains - Resources are conserved through the processing of high quality materials - guaranteed resistant to industrial washing - long-lasting quality

When operating with green energy, the boiler allows your company to achieve a CO2-neutral steam supply. — Generate up to 7.5 t/h steam in a highly efficient way using just electricity – no combustion, no emissions — High steam quality, excellent dynamics, full flexibility — Reduced expenditure: No flue gas, no fuel supply — Application-specific design and particularly reliable operation — Smart boiler control and seamless system integration — System equipment and service from a single source

Two independent firing units and flue gas paths offer very high flexibility in the ZFR thanks to a doubled modulation range. — Very high efficiency across the entire power range — Reliable solution for highly fluctuating steam demand — Project-specific equipment and optional components, for example superheated steam generation — Future-proof with options for low-NOx and CO2-neutral operation — Smart boiler control and seamless system integration — Stable supply and durable design Made in Germany

Two independent firing units and flue gas paths create a double control range for individual heat consumption. — Very high efficiency across all power ranges — Particularly suitable for highly fluctuating heat and process heat demand — Reliable solutions for heating plants and the manufacturing industry with temperature levels up to 225 °C — Heat supply for the future: Low-NOx or CO2-neutral operation possible — Complete system with intelligent control technology and protected remote connection — Proven and durable boiler technology Made in Germany

The heating boiler UT-L offers high performance and is extremely compact. The design complies with the Gas Appliances Regulation. — Very high efficiency up to 105% for optimised energy costs — Compact design for easy positioning and effective use of heat — Flexible application and low return flow temperature of 50 °C possible — Specific control concept and optional real-time monitoring — Future-proof heat supply and options for CO2-neutral operation — Proven and durable Bosch system from a single source — Fuel: Oil, gas, multi-fuel firing, Biogas, bio-oil, hydrogen, special fuels

The various output sizes and temperature ranges up to 190 °C of the UT-M enable flexible operation for countless process heat and heating applications. — Efficient heat and process heat for low running costs and emissions — Compact design for easy positioning and quick heating — Flexible use for industrial, commercial and district heating applications with temperatures up to 190 °C — Project-specific control solutions and optional real-time monitoring — Complete system from a single source, low-emission or CO2-neutral customer-specific operation possible — Proven and maintenance-friendly construction for a long service life and reliability — Fuel: Oil, gas, multi-fuel firing, Biogas, bio-oil, hydrogen, special fuels

Industrial heating with hot air generators with pellet operation from 43 to 300 kW The hot air generators with pellet operation are fully automatic equipment used for heating industrial, agricultural and livestock premises. Its use is increasingly frequent thanks to its rapid depreciation and neutral CO2 emissions that contribute to the preservation of the environment. The equipment has a basic equipment designed for the use of granulated fuels, an automatic burner that allows the use of granulated fuel such as pellets, olive bone or almond shells. It also has an automatic ash extraction system to keep the combustion chamber in perfect condition and a smoke extractor to ensure proper depression in the combustion chamber. The equipment can be supplied with a fuel tank of 190 or 400 liters capacity with the possibility of applying larger storage systems such as canvas or work silos. The diffusion of the air can be with rotating nozzles or through air ducts.

Heating technology with a future The calculation is simple, the technology successful. Efficient surface drying is achieved with biomass in Rippert plants. Together with the Hargassner company from Austria, a specialist for heating with biomass, and the proven Rippert plant know-how, the technology is now marketable and has gone into production. The demanding drying characteristics in a powder-coating plant are compatible with the process and work perfectly. A future-orientated heating technology with considerable economic and ecological benefits – the experts are unanimous in that. Wood pellets or wood chips are the inexpensive energy suppliers. They are valuable waste products that result from the processing of domestic timbers. Heating with wood chips – without intermediate heat transfer media such as thermal oil • Environmentally friendly and CO2-neutral • fully automatic boiler cleaning and ash discharge Maximum financial saving potentials are realised with this energy carrier. Wood chips, chopped to a transportable size and dried by the supplier, are stored in the storeroom near the plant. It can be located on the same level or lower. A tried-and tested transport system consisting of a floor agitator with springs and discharge auger carries the wood chips reliably into the plant. Here it acts as a fuel with maximum convenience. If the calorific value equivalents are examined, we see that 1,000 litres of fuel oil is equivalent to 12 m³ of wood chips. The ratio is the same for 1,000 m³ of natural gas. Heating with wood pellets - without intermediate heat transfer media such as thermal oil Wood pellets are true energy bundles. They consist of natural wood and are made by compressing sawdust, which is produced in large quantities every day in the industry. As a biomass they are the alternative to wood chips and are just as advantageous from an economical point of view. Pellets have the smallest volume and are conveyed dust-free and without odours from storage containers to a storage vessel next to the plant. They are transported into the combustion chamber via a rotary vane feeder and feed auger. For comparison: 1,000 l fuel oil = 2 t pellets 1,000 m³ natural gas = 2 t pellets 1,000 l liquefied gas = 1.32 t pellets Advantages • Reduction in energy costs Heating cost comparison (reference = 1,000 l fuel oil)

With the AirWave ClimaFilm bubble wrap from FLÖTER you get a climate-neutral foil without CO2 pollution. 100% climate neutral > 50% recycled material (largely from end-user disposal routes) 420mm wide Foil thickness 20 μm (thinner foils on request) For heavy to medium goods Perforated for easy detachment Made in Germany The AirWave Clima air cushion films are available in different cushion sizes: air cushion chain type 7 (as a replacement for filling paper or styrofoam chips) or air cushion mat type 8 (as a replacement for bubble wrap or polyethylene). Compatible with the AirWave1 and AirWave2 air cushion machines.

With the AirWave ClimaFilm bubble wrap from FLOTER you get a climate-neutral foil without CO2 pollution. 100% climate neutral 100 recycled material (82% from end-user disposal routes) 420mm wide Foil thickness 25μm For heavy to medium goods Perforated for easy detachment Made in Germany The AirWave Clima air cushion films are available in different cushion sizes: air cushion chain type 7 (as a replacement for filling paper or styrofoam chips) or air cushion mat type 8 (as a replacement for bubble wrap or polyethylene). Compatible with the AirWave1 and AirWave2 air cushion machines.

With the AirWave ClimaFilm bubble wrap from FLOTER you get a climate-neutral foil without CO2 pollution. 100% climate neutral > 50% recycled material (largely from end-user disposal routes) 420mm wide Foil thickness 20 μm (thinner foils on request) For heavy to medium goods Perforated for easy detachment Made in Germany The AirWave Clima air cushion films are available in different cushion sizes: air cushion chain type 7 (as a replacement for filling paper or styrofoam chips) or air cushion mat type 8 (as a replacement for bubble wrap or polyethylene). Compatible with the AirWave1 and AirWave2 air cushion machines.

With the AirWave ClimaFilm bubble wrap from FLÖTER you get a climate-neutral foil without CO2 pollution. 100% climate neutral > 50% recycled material (largely from end-user disposal routes) 420mm wide Foil thickness 20 μm (thinner foils on request) For heavy to medium goods Perforated for easy detachment Made in Germany The AirWave Clima air cushion films are available in different cushion sizes: air cushion chain type 7 (as a replacement for filling paper or styrofoam chips) or air cushion mat type 8 (as a replacement for bubble wrap or polyethylene). Compatible with the AirWave1 and AirWave2 air cushion machines.

Temperature-resistant and durable nonwoven with high elasticity and flexibility for various applications. CO2 neutral production in Austria! Benefits: * High elasticity and flexibility * Durable * Temperature-resistant * CO2 neutral production * Customizable grammages available Area of Applications: * Medical applications * Sportswear * Seals

Superhydrophilic nonwoven with high abrasion resistance for cleaning wipes and hygiene articles. CO2 neutral production in Austria. Benefits: * High abrasion resistance * Good tensile and tear strength * Superhydrophilic * ISCC+ certified polymer * CO2 neutral production * Customizable grammages available This product is also available as an ECO variant with a negative CO2 footprint! Area of Application: * Cleaning wipes * Hygiene articles

Superhydrophilic nonwoven with high abrasion resistance, tensile strength, and tear resistance. Ideal for cleaning wipes. CO2 neutral production in Austria! Benefits: *High abrasion resistance *Good tensile and tear strength *Superhydrophilic *ISCC+ certified polymer *CO2 neutral production *Customizable grammages available *This product is also available as an ECO variant with a negative CO2 footprint! Area of application: * Cleaning wipes

Single-layer nonwoven with high barrier and filtration properties. Used for filtering air, gas, and liquids. Climate-neutral production in Austria. Benefits: * High barrier and filtration properties * ISCC+ certified polymer * High air permeability * CO2 neutral production in Austria * Customizable grammages available * Applications: Air, gas, and liquid filtration * Medical face masks *FFP2 masks * Available in white and black colours This product is also available as an ECO variant with a negative CO2 footprint!

Single-layer, hydrophobic oil-binding fleece with high absorbency for protecting and cleaning smooth and rough surfaces. Benefits: * Fast and effective absorption of oil and other liquids * Easy to handle and dispose of * Hydrophobic technology attracts oil and repels water * Buoyant * Co2 neutral produced in Austria Area of ​​application * Protection of surfaces from contamination by oils * For containment, containment and containment of pollution * Ideal for workshops, garages, factories and other industrial applications

The new CHEP quarter pallet is the new generation of carriers is lighter, easier to handle, 100 percent CO2-neutral and much more efficient than its predecessor with respect to loading the displays. In combination with the STI Group Butterfly Base the assembly time is reduced by 50%.