Cleaning of machine and equipment - Import export

BORSIG offers emission control membrane technology for terminals and refineries, marine loading and petrol stations. Our products are: BORSIG Vapour Recovery Units (VRU), BORSIG Aromatic Recovery Units, BORSIG Carbon Retrofit Units, BORSIG Marine Vapour Recovery Units, BORSIG Dock Safety Units, BORSIG Vent Recovery Units

INOX® De-waxer IX 6000 is ideal for removing paraffin-based preservative waxes from new cars. The de-preservative is gentle on paints, plastics, glass and rubber. Due to its special formula, INOX® Depreservative IX 6000 is also suitable for cleaning and degreasing machines, equipment, vehicle underbodies and engines.

OBC-25CE is a stationary grain cleaning machine equipped with unloading elevator additionally. Presence of such kind of elevator simplifies grain cleaning process and makes it possible transferring grain into vehicles, grain vessels, trailers, big bag etc. Machine can also be equipped with a boot elevator and cyclone if necessary. On customer request wheels can be installed to OBC-25CE that turns the unit into mobile one. OBC-25CE performs grain and seeds cleaning using an aspiration system and sieves. Spreader separates impure grain in two equal parts and directs it to air channels. Fan airflow takes light impurities out. Larger impurities are captured with settling chamber from air stream. After that grain purified in aspiration system comes to upper and lower sieves. At these sieves grain gets cleared of impurities kind of different size. Pure grain is collected at the bottom of OBC-25CE and unloaded with built-in elevator.

Synthetic maintenance oil for the lubrication and cleaning of textile machines and precision equipment. A special combination of substances allows application on machines and parts in wet environments. It leaves a thin protective film and has excellent penetrating properties.

For the abandonment of Offshore structures special legal requirements apply. Tubes have to be deconstructed under the seabed. This requires special technologies. Our Downhole Cutting Heads (DCHs) can be inserted into tubes and casings over an umbilical from the working platform. Arriving at the destination they clamp in the tubes and perform a 360 degrees cut which severs the tube underneath the seabed. The DCH is pulled out and afterwards the pulling of the tube is possible. Cuttings can be performed up to 150 m (500 ft) deep and pipe sizes between 7” and 72” diameter, whereby the wall thickness can be up to 20” thick. For every requirement we offer the appropriate DCH. By extensions nearly every kind of pipe/tubing/casing can be cut.

Dry ice blasting has become the preferred procedure for post-fire cleaning: elimination of soot and cleaning of damage caused by the fire, cleaning of facades, restoration of historic and graded buildings, restoration of monuments: statues, frescos, post-flood cleaning, elimination of mildew, asbestos removal and decontamination, removal of chewing gum, cleaning of construction machines and equipment.

We produce an high effective industrial oil absorbent on basis natural peat moss. Oil absorbent ARCTIC has ability to biodegradation. Due to its excellent buoyancy, it is successfully used not only on soil and any hard surface, but is also especially effective on water. Oil absorption is 8-10 g oil per 1 g absorbent. Oil absorbent ARCTIC environmentally friendly, non toxic, absolutely safe for humans and animals. After use, it can be disposed of as a high-calorie secondary fuel when burned in boiler plants.

Forvac supply new and refurbished vacuums, pipework installations and hire machines. Whether you need portable, fixed or, a central vacuum system, Forvac has the expertise with full service and design capabilities, ensuring our innovations are backed up with complete support. Serving many clients and industries across the UK and Europe, Forvac Services are the perfect partner to satisfy your cleaning requirements, no matter how big or small your application, designing, manufacturing and installing industrial cleaning equipment is in our DNA, we are sure to have the solution to all your cleaning demands.

Oil Recovery System CLEANING OR DE-SLUDGING A CRUDE OIL TANK OR A LAGOON IS ONE THING BUT WHAT DO YOU DO WITH ALL THE SLUDGE? OIL RECOVERY FROM THE SLUDGE IS THE ANSWER Solution is The PHORS 10 that recovers the good oil from the sludge leaving dry cake sediment and water.

The particulate filter cleaning machine is designed to clean the particulate filters of both passenger cars and commercial vehicles. The machine is completely made of stainless steel. With the water purification system, water in the tank is recirculated and cleans the inside of the particle filter.The machine starts the washing process by measuring the clogging rate of the filter after test button on the touch-operated display is selected. After the washing process is completed, you can test again and measure that the filter is cleaned. Then you can finish the washing process and proceed to the drying process. After drying the inside of the filter, the cleaning process is fully completed. There are bag and cartridge filters on the machine. Tank has heat insulation. The machine has lighting and a steam discharge fan. You can wash and dry 2 different filters simultaneously, as the machine has individual washing and drying processes.The machine exist in manuel and pneumatic.

JPT Opto Electronics is a manufacturer of laser equipment. The company was founded in 2006 and specializes in investigation, development, production and sales of laser equipment and related products. The company owns a number of patents and intellectual property rights and produces several types of fiber lasers: continuous wave lasers, quasi-cw, lasers for scientific proposes, variable-wavelength lasers, fiber amplifiers, ASE emission units, etc. These products are widely used in the fields of laser marking and engraving, 3D printing, DTS systems and scientific research. The company has fully implemented the ISO 9001 quality management system and EPR system, and provides comprehensive pre-sales and after-sales services for all customers.

JPT Opto Electronics is a manufacturer of laser equipment. The company was founded in 2006 and specializes in investigation, development, production and sales of laser equipment and related products. The company owns a number of patents and intellectual property rights and produces several types of fiber lasers: continuous wave lasers, quasi-cw, lasers for scientific proposes, variable-wavelength lasers, fiber amplifiers, ASE emission units, etc. These products are widely used in the fields of laser marking and engraving, 3D printing, DTS systems and scientific research. The company has fully implemented the ISO 9001 quality management system and EPR system, and provides comprehensive pre-sales and after-sales services for all customers.

JPT Opto Electronics is a manufacturer of laser equipment. The company was founded in 2006 and specializes in investigation, development, production and sales of laser equipment and related products. The company owns a number of patents and intellectual property rights and produces several types of fiber lasers: continuous wave lasers, quasi-cw, lasers for scientific proposes, variable-wavelength lasers, fiber amplifiers, ASE emission units, etc. These products are widely used in the fields of laser marking and engraving, 3D printing, DTS systems and scientific research. The company has fully implemented the ISO 9001 quality management system and EPR system, and provides comprehensive pre-sales and after-sales services for all customers.

18UT ProD model 18 liter Ultrasonic Cleaning Machine is microprocessor controlled and has automatic memory. It has internal heaters and is controlled by a digital panel. It is your greatest assistant in cleaning difficult dirt with its reinforced ultrasonic cleaning performance. The 18UT ProD, a desktop model, is an easy-to-use and easy-to-carry machine. Areas of Use Hospital Equipment Surgical Instruments Veterinarians Disinfection Applications Laboratories Optical Industry Pharmaceutical Industry Hairdressers and Barbers

Baskets made of stainless steel ensure that dirty products are cleaned in the best way possible without damaging the machine. It can be easily carried thanks to the handles on the sides and the feet prevent the products from touching the base. With its design, ultrasonic vibrations can easily reach dirty surfaces.

Baskets made of stainless steel ensure that dirty products are cleaned in the best way possible without damaging the machine. It can be easily carried thanks to the handles on the sides and the feet prevent the products from touching the base. With its design, ultrasonic vibrations can easily reach dirty surfaces.

Baskets made of stainless steel ensure that dirty products are cleaned in the best way possible without damaging the machine. It can be easily carried thanks to the handles on the sides and the feet prevent the products from touching the base. With its design, ultrasonic vibrations can easily reach dirty surfaces.

Baskets made of stainless steel ensure that dirty products are cleaned in the best way possible without damaging the machine. It can be easily carried thanks to the handles on the sides and the feet prevent the products from touching the base. With its design, ultrasonic vibrations can easily reach dirty surfaces.

Baskets made of stainless steel ensure that dirty products are cleaned in the best way possible without damaging the machine. It can be easily carried thanks to the handles on the sides and the feet prevent the products from touching the base. With its design, ultrasonic vibrations can easily reach dirty surfaces.

60UT ProD is a mobile style ultrasonic cleaning device. It can take 3 54cm washing baskets. It can be easily moved thanks to its wheeled structure. It heats the liquid from the inside with its 2 internal heaters, saving energy. It is equipped with a liquid level sensor, preventing dry operation due to error. It is controlled with a digital panel. It is your greatest assistant in cleaning difficult dirt with its strengthened ultrasonic cleaning performance. Areas of Use Hospital Equipment Surgical Instruments Veterinarians Disinfection Applications Laboratories Optical Industry Pharmaceutical Industry Defense industry Coating Sector

Desktop and smallest size 4UT ProD model Ultrasonic Cleaning Machine is microprocessor controlled and has automatic memory. It has internal heaters and is controlled by a digital panel. It is your greatest assistant in cleaning difficult dirt with its strengthened ultrasonic cleaning performance. It is an easy to use and carry model, mostly preferred by the medical sector. Usage areas Hospital Equipment Surgical Instruments Veterinarians Disinfection Applications Laboratories Optical Industry Pharmaceutical Industry Hairdressers and Barbers

12UT ProD model 12 liter Ultrasonic Cleaning Machine is microprocessor controlled and has automatic memory. It has internal heaters and is controlled by a digital panel. It is your greatest assistant in cleaning difficult dirt with its reinforced ultrasonic cleaning performance. The 12UT ProD, a desktop model, is an easy-to-use and easy-to-carry machine. Areas of Use Hospital Equipment Surgical Instruments Veterinarians Disinfection Applications Laboratories Optical Industry Pharmaceutical Industry Hairdressers and Barbers

28UT ProD model 28 liter Ultrasonic Cleaning Machine is microprocessor controlled and has automatic memory. It has internal heaters and is controlled by a digital panel. It is your greatest assistant in cleaning difficult dirt with its reinforced ultrasonic cleaning performance. The 28UT ProD, a desktop model, is an easy-to-use and easy-to-carry machine and is one of the most preferred models.

35UT_ProD is the model with the largest volume in the desktop cleaning series. It is 35 liters. It is specially manufactured to fit 54cm washing baskets. In this way, it ensures that the washing basket is transferred to all devices of the Central Sterilization Unit (MSU) without the need for an additional basket. Ultrasonic Cleaning Machine is microprocessor controlled and has automatic memory. It has a built-in stainless heater and thus heats the liquid quickly and also saves energy, it is controlled with a digital panel. It is your greatest assistant in cleaning difficult dirt with its strengthened ultrasonic cleaning performance.

The 6UT ProD model is our model with the most optimum dimensions among the small-sized Ultrasonic Cleaning series. It has microprocessor control, memory and audible warning features, and an additional fan cooling system. It is specially produced for repair shops, dental clinics and jewelers.

18UT ProD model 18 litre Ultrasonic Cleaning Machine is microprocessor controlled and has automatic memory. It has internal heaters and is controlled by digital panel. It is your biggest helper in cleaning difficult dirt with its reinforced ultrasonic cleaning performance. As a desktop model, 18UT ProD is easy to use and easy to carry. Areas of Use Hospital Equipment Surgical Instruments Veterinary Surgeons Disinfection Applications Laboratories Optical Sector Pharmaceutical Industry Hairdressers and Barbers

The 6UT ProD model is our most optimally sized unit in the small-scale Ultrasonic Cleaning series. Designed with precision and efficiency in mind, this model is ideal for professionals seeking a reliable and versatile cleaning solution. Equipped with advanced features such as microprocessor control, memory functions, and audible alarms, it ensures a seamless and effective cleaning process. Additionally, it includes a fan cooling system that enhances performance and durability, making it a perfect choice for demanding environments. Areas of Use Hospital Equipment Surgical Instruments Veterinary Surgeons Disinfection Applications Laboratories Optical Sector Pharmaceutical Industry Hairdressers and Barbers

Manual ultrasonic cleaning equipment with a capacity of 150 L. Exclusive BRIO technology three times more efficient than conventional systems. MANUAL Series Manual ultrasonic cleaning machines that optimise time and consumption. Composed of a simple and efficient control panel, with general switch, safety button, digital thermostat with temperature control and buttons to activate heating and ultrasound. They also have a manual work basket made up of a stainless steel tray that protects the bottom of the tank and in which the objects to be cleaned are placed inside the main tank. Robust construction with high thickness and AISI 304/316 stainless steel. Available from 60L to 7500L to cover all the needs of each sector.

Automatic ultrasonic cleaning equipment with a capacity of 4.665 L. Exclusive BRIO technology three times more efficient than conventional systems. PRO Series Automatic ultrasonic cleaning machines with premium features that optimise time and consumption. Automate your cleaning process and enjoy superior standard equipment with the most efficient ultrasonic cleaning system on the market. Lifter with loading grid for effortless handling of parts, tamping system to separate dirt, unique OPS oil decanting system, intuitive touch panel and much more. Robust construction with high thicknesses and AISI 304/316 stainless steel. Available from 150L to 7500L to cover all the needs of each sector.