Clamping blocks - Import export

KAUP Block & Brick Clamps are used worldwide for the non-palletised transportation of all kinds of industrially manufactured blocks and bricks. They grip packets of bricks from the side and are therefore suitable for handling of packets of upright format blocks with plane surfaces such hollow, lime sand and concrete blocks as well as curb stones. However the ideal Block and Brick Clamp can be configured to nearly every individual purpose. How? With the extensive KAUP Block and Brick Clamp program and the possibility to adapt KAUP attachments to suit nearly every individual working application.

with self-locking max. clamping force 18.5 kN max. clamping stroke 8 mm max. 100 bar, as per data sheet B1.8233

without self-locking max. clamping force 31 kN max. clamping stroke 8 mm max. 100 bar, as per data sheet B1.8233

with self-locking max. clamping force 7.5 kN max. clamping stroke 6 mm max. 70 bar, as per data sheet B1.8233

without self-locking max. clamping force 13.5 kN max. clamping stroke 6 mm max. 70 bar, as per data sheet B1.8233

Ø 36 x 10 mm stroke 500 bar, see page B1.372

Ø 25 x 10 mm stroke 500 bar, see page B1.372

Ø 16 x 8 mm stroke 500 bar, see page B1.372

size 1, Ø 9.8 - 10.2 mm without centring function 250 bar, as per data sheet B1.481

size 2, Ø 14.8 - 15.7 mm without centring function 250 bar, as per data sheet B1.481

size 2, Ø 13.8 - 14.7 mm without centring function 250 bar, as per data sheet B1.481

size 2, Ø 12.8 - 13.7 mm without centring function 250 bar, as per data sheet B1.481

size 2, Ø 11.8 - 12.7 mm without centring function 250 bar, as per data sheet B1.481

size 2, Ø 11.3 - 11.7 mm without centring function 250 bar, as per data sheet B1.481

size 1, Ø 10.3 - 11.2 mm without centring function 250 bar, as per data sheet B1.481

size 1, Ø 9.3 - 9.7 mm without centring function 250 bar, as per data sheet B1.481

size 1, Ø 8.3 - 9.2 mm without centring function 250 bar, as per data sheet B1.481

low-block clamping cylinder piston Ø 20 mm, stroke 10 mm max. 500 bar, as per data sheet B1.711

Swing clamps are used where low clamping forces suffice or where the clamping point must be free when mounting and removing the workpiece. The block form of the housing offers universal fastening possibilities. The magnetic piston is primed for electrical end position feedback. Including screw and lock washer for fastening the clamping arms (accessories). The swing action of the clamp should not be blocked. F1 = at 6 bar (max. operating pressure).

Housing hardened and black oxidised. Contact faces ground. Note: This positioning and clamping system is especially suitable for installation in fixtures (plates, clamping tower blocks, etc.) in all mounting positions. The modular design allows the number of and distance between the locating cylinders to be ideally adjusted to suit the clamping task. Due to the small diameters, the spacing between the locating cylinders can also be reduced. The 3 clamping balls are mechanically released through control of the locating cylinder with the "opening" connection. The 3 clamping balls move inward and the fixture can be changed quickly. For clamping, the air is taken from the "opening" connection and the "clamping" connection then receives air on the locating cylinder. The 3 clamping balls are mechanically driven outward again and the new fixture is clamped. To achieve optimal retaining force, the locating cylinder remains connected to the air.

A new crimper for big sized aluminium profiles 2 universal and adjustable punching units allow a work range of the crimping point from 25 to 60 mm from the vertex of the profile Pneumatic crimping via lever system ensures synchronous movement of the punching units Hydropneumatic descending counter support for easier handling of the frames Max profile dimensions: height 160 mm, max. crimping height 130 mm/ 145 mm Min. frame dimension inside 110mm with standard counter support / 175 mm with automatic counter support 2 excenter disc for good positioning of profiles 2 pneumatic down clamps Adjustable height of the V-stop, crimping knives and V-blocks 3 pairs of standard crimping knives 3/5/7 mm 2 V-blocks 15 / 30 mm 3 pairs of standard crimping knives 3/5/7 mm Power 56 KN at 8 bar each head 2 pneumatic down clamps hydraulic counter support V-blocks adjustable up to 120 mm Max profile dimensions: height 160 mm, max. crimping height 130 mm/ 145 mm Min. frame dimension inside 110mm...

Our latest series of gas-cooled and compact weld heads. They are for smaller outside diameters with a narrow handle for tighter access conditions. Weld head type \ Field of application mm \ inch \ weight OSK 21 CS \ OD 3.17 - 21.3mm \ 0.125" - 0.839" \ 0.8kg OSK 38 CS \ OD 3.17 - 38.1mm \ 0.125" - 1.500" \ 1.2kg —-- Our new generation of compact weld heads for high duty cycle requirements have watercooled clamp housings and clamping levers. Both OSK CW weld heads are operated using a sharable handle and cable assembly. Weld head type \ Field of application mm \ inch \ weight OSK 21 CW \ OD 3.17 - 21.3mm \ 0.125" - 0.839" \ 1.0kg OSK 38 CW \ OD 3.17 - 38.1mm \ 0.125" - 1.500" \ 1.4kg Only one drive unit is needed for all C and CW weld heads. —-- OSK 21 CB gas-cooled weld head with clamping block for tube-totube connectons incl. setting gauge for pipe Weld head type \ Field of application mm \ inch \ weight OSK21 CB \ OD 3.17 - 21.3mm \ 0.125" - 0.839" \ 1.0kg

MBX magnetic clamping blocks have opposite clamping sides that are activated when actuated. They are designed to clamp workpieces on steel surfaces such as machine or assembly tables. Several MBX can also be connected together via the internal hexagon of the indexing shaft to clamp longer or larger workpieces.

FXL magnetic clamping blocks are available in many sizes and designs. They can be manufactured with one or more clamping surfaces and different pole sizes. As with the FXL magnetic clamping plates, they are controlled by an FXL-C control unit; optionally with only one channel or also with several channels in order to be able to control the individual clamping surfaces of a block separately.

The MCF control units are designed to operate electro-permanent magnet modules. It is available both as a single board for installation in the customer's existing control cabinets and as an IP 54 control cabinet solution. In addition to the FXE lifting magnet modules, other electro-permanent magnet components such as magnet clamping plates or magnet clamping blocks can also be controlled with the MCF, both as a single system (ALNICO) and as a double system (ALNICO/ND). The MCF can be controlled via a machine control, radio remote control, manual pushbutton or other potential-free contacts.

Original STAUFF Block Clamps in addition to clamps in the Heavy Series and the Twin Series according to German Industry Standard DIN 3015 (Parts 2 and 3), designed as a construction kit for the installation of pipes, tubes, hoses, cables and other flexible or rigid components with the most common metric and imperial outside diameters from 6 mm to 10 mm / .24 inch to .39 inch. Clamp bodies manufactured from Polypropylene. Excellent UV, weathering and chemical resistance – even under extreme conditions.

Most economical solution available for quick, easy and secure pipe, tube, hose and cable installation Original STAUFF Block Clamps in addition to clamps in the Heavy Series and the Twin Series according to German Industry Standard DIN 3015 (Parts 2 and 3), designed as a construction kit for the installation of pipes, tubes, hoses, cables and other flexible or rigid components with the most common metric and imperial outside diameters from 6 mm to 42 mm / .24 inch to 1.65 inch. Clamp bodies manufactured from various thermoplastics – also with shock-absorbing and noise-reducing elastomer inserts. Excellent UV, weathering and chemical resistance – even under extreme conditions.

Most economical solution available for quick, easy and secure pipe, tube, hose and cable installation Original STAUFF Block Clamps according to German Industry Standard DIN 3015 (Part 3), designed as a construction kit for the installation of pipes, tubes, hoses, cables and other flexible or rigid components with the most common metric and imperial outside diameters from 6 mm to 42 mm / .24 inch to 1.65 inch. Clamp bodies manufactured from various thermoplastics. Excellent UV, weathering and chemical resistance – even under extreme conditions. Tested and approved by several independent certification organisations.

Most economical solution available for quick, easy and secure pipe, tube, hose and cable installation Original STAUFF Block Clamps according to German Industry Standard DIN 3015 (Part 2), designed as a construction kit for the installation of pipes, tubes, hoses, cables and other flexible or rigid components with the most common metric and imperial outside diameters from 6 mm to 450 mm / .24 inch to 17.71 inch. Clamp bodies manufactured from various thermoplastics, thermoplastic elastomers or aluminium – also with shock-absorbing and noise-reducing elastomer inserts. Excellent UV, weathering and chemical resistance – even under extreme conditions. Tested and approved by several independent certification organisations.