Chip drying - Import export

PINY KAY briquettes consist in rectangular form agglomerations with easy stacking and handling. Because of the hole in these briquettes, it reduces amount of smoke. These briquettes are produced by pressing dry chipped wood at high pressures and high temperatures. They have the maximum burning time and produce the maximum useful heat. Piny&Kay fuel briquettes are remarkably resistant to mechanical action and moisture and store well. Pini kay Fireplace Briquette burns slowly, which gives off more heat, thus saves money. The unique technology of producing this briquette enables aesthetic combustion, without absorbing moisture from the air, and prevents contamination of heating devices.

PINY KAY briquettes or PINI KAY briquettes consist in rectangular form agglomerations with easy stacking and handling. Because of the hole in these Briquettes, it reduces amount of smoke. These Briquettes are produced by pressing dry chipped wood at high pressures and high temperatures. They have the maximum burning time and produce the maximum useful heat. Piny and Kay fuel briquettes are remarkably resistant to mechanical action and moisture and store well.

Compact, skid-mounted scrap metal equipment for turnings volume reduction and solid-liquid separation of small to medium volumes of flowable chips. Fluid reclamation and dry chip output make this scrap removal system ideal for smaller shops

Process loose metal turnings into flowable chips. Scrap metal recycling system couples volume reduction with fluid separation to produce dry chips and reclaim 99% of valuable coolants and cutting oils. The ideal solution for scrap metal consisting of flowable chips and loose turnings

Reduce volumes of large bundles and stringy turnings. This scrap metal equipment delivers dry, shovel-grade chips and reclaims up to 99% of valuable coolants and cutting oils

Magnetic chip conveyors transfer wet or dry ferrous scrap without carryover. PRAB’s magnetic chip conveyors effectively transfer wet or dry ferrous chips, stamping slugs, turnings, parts or die scrap without carryover. This scrap conveyor system moves material with the aid of permanent ceramic magnets located under a stainless-steel slider bed. An oil reservoir in the base of the conveyor self-lubricates the chain for quiet performance and low maintenance of this scrap handling system.

Chain conveyors made to handle severe-duty, highly abrasive, metal chips, fines and swarf. Transfer and elevate the most difficult and abrasive wet or dry metal chips, fines, swarf, die scrap and other materials with this rugged, chain driven, liquid-tight conveyor. Every part of this rugged chain driven conveyor is designed for severe duty. The Heavy-duty, abrasion-resistant flight bars of the scrap conveyor feature an exclusive bolt-free connection so they stay strong under grueling conditions. The abrasion-resistant steel press-formed trough is liquid tight and comes standard with safety covers

Move or dump more scrap with heavy-duty dumpers and industrial carts. PRAB’s line of industrial carts and automatic dumpers help move wet or dry metal chips, turnings and die scrap, safely and easily to and from scrap metal equipment. Customize the model and capacity cart you need with tow links, dumping frames, pouring baffles (contains cutting fluids), drain plugs, drain racks and casters designed to meet your floor conditions. Mechanical or automatic hydraulic dumpers help simplify the process of unloading carts. Improves housekeeping with efficient one-person operation Minimizes scrap handling costs Reduces production downtime

Industrial centrifuge designed for effectively separating metal chips from cutting fluids. The PRAB Metal Chip Wringer/Centrifuge uses 600G’s of centrifugal force to spin fluid from metal chips. This process is the most cost-effective solution for producing dry metal chips—which are more valuable to the scrap dealer. Wringers also help to reclaim up to 98% of spent cutting fluid for recycling and reuse. Metal chip wringers/centrifuges handle various types of metal scrap, including aluminum, brass, cast iron, steel, stainless steel, and more.

Highly flexible installation layout capabilities for maximized floor space. Pneumatic Scrap Conveyors are air transfer systems for moving wet or dry chips to a central chip processing system or load-out container. No plant air is required. PRAB Pneumatic scrap conveyors offer operation and installation flexibility. This specific scrap material conveyor model is designed to pick up directly from CNC machining centers and transfer wet or dry material to a central chip processing system or load out container. The overhead piping of the pneumatic scrap conveyor allows for installation flexibility, whether you need to locate your scrap metal equipment near the ceiling or in tight spaces. The pneumatic design allows for easy reconfiguration when modifying plant space.

Meter feed and distribute wet or dry chips, turnings and swarf with the metal screw conveyor. Cost effective scrap conveyor system suited for horizontal or inclined applications. The PRAB metal screw conveyor is often used to feed other scrap metal equipment, such as a shredder or wringer, because of its ability to separate bundled material and meter feed. Easy to operate and virtually maintenance free. This scrap conveyor is engineered to handle a wide range of metalworking scrap for chip processing. It is most often used to feed other scrap metal equipment, such as a shredder or wringer, because of its ability to separate bundled material and meter feed equipment. This model scrap conveyor is available in a wide range of sizes with many options depending on the type and form of material, and storage or recycling needs. PRAB engineers each screw conveyor to match the exact needs of each individual application.

Moisture and size controlled pine wood chips for biomass industry.

Pine Wood chips, our manufacture is high quality as requested size, moisture, dust, can be screened or direct load. Dust free pine wood chips, contact for more details. P45 standards or any other standard can be achieved. Size and moisture can be controlled.

CSB series drum driers manufactured by our company with a capacity of 2 to 15 t/h are intended for drying chipped biomass, including sawdust, microchips, straw, etc. All models of CSB series drum dryers are adapted to work with heat generators for both wet (humidity up to 55%) and dry biomass (humidity up to 20%). Our dryers are designed with a view to maximally increase the level of safety during their operation which is guaranteed by the significant reduction in the temperature of the drying agent, the application of a flap automatically cutting off the flow of the drying agent to the drum of the dryer and the implementation of a modern fire protection system and an exhaust gas purification system in all dryer models.CSB series drum dryers feature a solid construction and aesthetic design. They work stably and efficiently.

Series V 300 - 700 TM The HEINKEL Multipurpose centrifuges V 300 – V 700 TM are known as robust, economical and reliable centrifuge. Fields of application are the de-oiling of parts or chips and drying of bulk parts, further the oiling or impregnation of bulk goods. Special properties for the customer´s benefit: Rugged, long life design based on the modular principle Very simple to operate – optionally to be improved through a basket lifting device Speed control Flexible deployment directly at the place where the chips are produced Maintenance friendly

The Centrifuge takes in a slurry of chips and coolant, separates the coolant out by high speed spinning, leaving dry chips.

The lift bottom centrifuge is designed for continuous operations. This up and down motion of the live bottom pushes the chips upward through the sieve. The centrifugal force, up to 500 times the force of gravity, will dry the chips, resulting in the maximum degree of de-oiling. The remaining oil content is extremely low. The dry chips fall down over the edge of the drum into a container. The are different models and different drives available.

Granito is composed of physical irregular chips of frit applied dry in either homogeneous or heterogeneous dispersions by adequate equipment over the surface of glazed ceramic ware and fixed in place with proper fixers. Particle sizes offered are in relation to standardised intervals. Products obtained using granito are useful from the decorative standpoint as well as the solution to many physical problems encountered in use. Usual particle size ranges are inferior to 2, 1.5, 1, 0.75, and 0.5 mm.

Kindling dry (wood chips) in a net 3 kg