Results for
China
Manufacturing Process CNC Machining & Injection Molding PEEK performance Polyetheretherketone (PEEK) is a high-performance, engineering thermoplastic characterized by an unusual combination of properties. These properties range from high temperature performance to mechanical strength and excellent chemical resistance. Material Grade ARKPEEK-1000: 100%PEEK Produced from virgin polyetheretherketone resin and offers the highest toughness and impact resistance of all types. ARKPEEK-CF30: 30% Carbon Fiber + 70% PEEK Carbon fiber reinforcement lends the material a high level of rigidity and creep strength, high mechanical strength and heat conductivity values. ARKPEEK-GF30: 30% glass fiber + 70% PEEK Glass filled PEEK exhibits increased mechanical strength and high rigidity. ARKPEEK-MOD: 10% Carbon Fiber + 10% PTFE +10% Graphite high performance engineering plastic with product characteristics including excellent sliding and abrasion & wear resistance, high mechanical.
Request for a quoteChina
Material: Amorphous, Semi-crystalline and Mineral Filled Semi-crystalline. PEEK (polyetheretherketone) Film Provides: ● High Temperature Performance ● Excellent Tribological Properties ● Broad Chemical Resistance ● High-Strength & Toughness ● Electrical Stability & Radiation Resistance ● Low Smoke & Toxic Gas Emission ● High-Purity, extremely low extractables Appication: ● Micro speaker diaphragm, dome tweeter. ● Presslire exchanger and senior oliaphragin. ● Aerospace high-speed rail insulation and TAB heat insulation components. ● Thrust washers for micro motors, gaskets for automobiles. ● High-temperature resistant label, pressure sensitive tape substrate. ● Insulation layer of electric vehicle battery. ● Flexible film surface heater. ● Wire, cable, insulation and wrcop sheaths.
Request for a quoteChina
Machinable Glass Ceramic has a continuous use temperature of 800ºC and a peak temperature of 1000ºC. Its coefficient of thermal expansion readily matches most metals and sealing glasses.It processes good machinability and can be lathed, milled, planed, ground, bored, incised and threaded. It also has the advantages of insulation, pore-free, high/low-temperature resistant, acid and alkali resistant and thermal impact resistant.
Request for a quoteChina
Abrasion resistance/Zirconia ceramic ring for sealed ink cup/pad printing/innovacera 1. Introduction: Round Zirconia ceramic ring is used for a Ever Bright pad printing ink cup machine, electronic control, lighting and electrical temperature control and other industries.Zirconia ceramic scraper ring is also used for thermostat,technical ceramic,temperature control. The temperature controllers,manufactured with Zirconia,have revolutionary breakthrough if compared with traditional plastic parts.They are highly improved in strength,insulation performance,heat resistant performance,especially sensitivity to temperature Innovacera is offered Yttria Tetragonal Zirconia Polycrystal(Y-TZP), there are many applications of Zirconia ceramics in the chemical and petrochemical industries. They provide economic payback in the way of reduced maintenance and down time. Zirconia ceramics is also becoming the material of choice for components in healthcare applications.
Request for a quoteChina
guiding shaft material: stainless steel 303 manufactured by CNC multi-axis lathe machining length: 204 mm diameter: 4 +0/-0.1 mm 3 threads: M3 2 threads on one end, 1 thread on the other end Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.
Request for a quoteChina
Brass Precision Turned Components by CNC lathe turning Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.
Request for a quoteChina
bearing bush material: white POM size: diameter 17 +/- 0.10 mm, height 10 +/- 0.15 mm Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.
Request for a quoteChina
Steel Machining Parts manufactured by CNC turning & milling Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.
Request for a quoteChina
Steel Machined Components by CNC turning & milling Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.
Request for a quoteChina
Steel Machined Parts manufactured by CNC turning & milling Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.
Request for a quoteChina
Non-standard Brass Machine Parts manufactured by sliding head multi axis CNC lathe Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.
Request for a quoteChina
knuckle flanged housing material: aluminum alloy 6061 size: diameter 4.25 +/-0.01 inch, 2.50 +/-0.01 inch, height 1.50 +/-0.01 inch 4 through holes diameter 0.332 +/-0.005 inch surface roughness Ra 1.6 Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.
Request for a quoteChina
revolving shaft material: free-cutting steel finish: plated with white zinc edge milled, side tapped with thread Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.
Request for a quoteChina
ladder-shaped threaded rod size helical pitch: 10 mm diameter: 14 mm length: 300 mm 2 holes milled and threaded in one end, thread specification: M3 material: stainless steel 303 Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.
Request for a quoteChina
turbine shaft manufactured by CNC turning material: cold drawn 18-8 (303) stainless steel, surface finish: passivation hex bar incircle diameter 5.556 +0.000/-0.060 mm internal thread: 8-32 UNC 2B, on both ends 2 grooves, width: 0.64 +0.10/-0.00 mm Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.
Request for a quoteChina
wheel shaft manufactured by CNC multi-axis lathe machining length: 214.5 mm diameter: 6 mm material: stainless steel 303 Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.
Request for a quoteChina
wheel shaft manufactured by sliding head CNC multiple axis lathe machining material: stainless steel 303 diameter: 10 mm length: 258 mm Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
China
Steel Hex Pipe Fittings manufactured by CNc turning, threading Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.
Request for a quoteChina
orifice holder hex incircle diameter: 1.06 +/-0.02 inch length: 2.00 +/-0.02 inch external thread section length 0.75+/-0.02 inch on both ends external thread 3/4-14 male NPT (TYP) interior thread 5/8-28UN-2A material: free-cutting steel C12L14 Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.
Request for a quoteChina
End Fitting material: stainless steel AISI 316 hex distance across flats: 24 mm length: 42.5 mm external thread: NPTF 1/2”, 3/4x16UNF inner diameter: 9.9 mm Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.
Request for a quoteChina
stainless steel nipple manufactured by CNC turning external thread 1/2〞NPSM THD schedule 80 length 1.25 +0.13/-0.00 inch Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.
Request for a quoteChina
hex pipe nipple material: carbon steel ASTM 1045 finish: zinc plated size: hex distance across flats 1.125 inch, length 1.96 inch thread: 3/4 NPTF, 14 threads per inch, 0.55 inch thread engagement manufacturing process: sawing, turning, threading, plating Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.
Request for a quoteChina
Aluminum Alloy Parts manufactured by CNC turning Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.
Request for a quoteChina
Aluminium Alloy Machined Parts manufactured by slideing head multi axis CNC lathe Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.
Request for a quoteChina
Aluminum Alloy Parts by CNC lathe turning Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.
Request for a quoteChina
tube cap screw material: aluminum alloy 6061-T4 finish: clean and deburred external thread: 1/2-20 UNF 2A size: external diameter 0.750 +/-0.015 inch, length 1.125 +/-0.015 inch socket hex incircle diameter 0.390 +0.010/-0.000 inch, depth 0.31 inch, to accept 3/8” hex key Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.
Request for a quoteChina
Brass Machine Elements manufactured by sliding head multi axis CNC lathe Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.
Request for a quoteChina
Brass Screw manufactured by CNC turning hex incircle diameter 13.88 - 14.25 mm diameter: 14.22 mm, length: 17.9 +/- 0.45 mm through hole material: brass ASTM C36000 Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.
Request for a quoteChina
Brass Components manufactured by CNC lathe turning Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.
Request for a quoteResults for
Electronic machines - Import exportNumber of results
93 ProductsCountries
Company type
Category