Results for
SICHUAN ODOT AUTOMATION
China
Terminal modules are used to stabilize the internal bus communication. When the number of adapter extension IO modules reaches 16 or more and terminal modules should be required. When the number of adapter extending IO modules is less than 16, and the terminal module CT-5810 only for dustproof could be selected. The dustproof terminal could cover the internal bus and field power supply hardware of the last IO module. And terminal modules have no process data and configuration parameters.
Request for a quoteSICHUAN ODOT AUTOMATION
China
CT-3238: 8-channel analog input /0&4-20mA/15-bit single-terminal Module features The module supports 8-channel current signal acquisition. The module can be configured for 0-20mA or 4-20mA current signal acquisition. The module supports 2-wire (non-loop output, external power supply required) or 4-wire current sensor input. The internal bus of the module and field input adopts magnetic insulation. The module input channel is connected to the field active analog signal current output sensor. The module channel equips with TVS overvoltage protection
Request for a quoteSICHUAN ODOT AUTOMATION
China
IO Config V1.0.0.6(Fully with .NET4.0.rar|CT-3804 CT-4234: 4-channel analog output /0&4-20mA/16-bit single-terminal Module features 2 output ranges can be set(0-20mA、4-20mA) The module internal bus and field output adopts magnetic insulation Single-terminal grounded together output mode
Request for a quoteSICHUAN ODOT AUTOMATION
China
CT-5720 Bus extended slave module Module Description The bus extened slave module is used to extend the bus.The bus extended slave module has no process data and configuration parameters.
Request for a quoteSICHUAN ODOT AUTOMATION
China
CT-5710 Bus extended master module Module Description The bus extened master module is used to extend the bus.The bus extended master module has no process data and configuration parameters. Wiring Bus extended cable requires 5 core shielded cable, IBS+ and IBS- must use twisted pair. PE guarantees a reliable grounding and the total length of the bus extended cable should not exceed 10 meters.
Request for a quoteSICHUAN ODOT AUTOMATION
China
CT-5321 Modbus Serial Port Module 1 Module Description The Modbus serial port module supports 1 channel RS485/RS232 /RS422 (optional), supports Modbus RTU/ASCII protocol, and supports master, slave and free transparent transmission mode. The serial Module CT-5321 could be applied with the adapter modules, so it could convert Modbus into other protocols such as Modbus TCP, Profinet, EtherCAT, EtherNet/IP, etc. When the module is used, serial port parameters and Modbus instructions should be configured in IO Config software. Devices with RS485/RS232/RS422 interface, which support modbus-RTU /ASCII, could be applied with CT-5321 to realize interconnection with upper PLC or upper computers. CT-5321 could be applied with devices such as: PLC, DCS, remote IO, VFD, motor start protection device, intelligent high and low voltage electrical apparatus, power measurement device, intelligent field measurement equipment and instruments, etc.
Request for a quoteSICHUAN ODOT AUTOMATION
China
CT-4154 4 channels Voltage Output 0~5VDC/0~10VDC/±5VDC/±10VDC,16 bits Module features The module supports 4 channels voltage signal output Output range: 0~5VDC, 0~10VDC, ±5VDC, ±10VDC, 16 bits The module carries with 4 analog output LED indicators Module output signal is single - ended common - grounded output
Request for a quoteSICHUAN ODOT AUTOMATION
China
The module supports 8 channels voltage signal output Output range: 0~5VDC, 0~10VDC, ±5VDC, ±10VDC, 16 bits The module carries with 8 analog output LED indicators Module output signal is single - ended common - grounded output
Request for a quoteSICHUAN ODOT AUTOMATION
China
CT-3158: 8 Channel Voltage Input 0~5VDC/0~10VDC/±5VDC/±10VDC, 12Bit Module features The module supports 8 channels of voltage signal input The module could collect 0~5VDC, 0~10VDC, ±5VDC, ±10VDC, with a 12-bit resolution The module carries with 8 analog input channel LED indicator The module input signal is a single ended common grounding input
Request for a quoteSICHUAN ODOT AUTOMATION
China
The module supports 4-channel thermocouple signal acquisition The module carries with 4 analog indicators The module supports 9 kinds of conventional thermocouple temperature measurement type The internal bus of the module and field input adopts magnetic isolation The module input channel supports TVS overvoltage protection 24-bit ADC resolution (Σ-δ type)
Request for a quoteSICHUAN ODOT AUTOMATION
China
IO Config V1.0.0.6(Fully with .NET4.0.rar|CT-7221CT-7221 Power Supply Extension Module 5V/2A Module features System Power and Field Power Extension System Power Output 2A@5VDC Field Power Extension 8A Current
Request for a quoteSICHUAN ODOT AUTOMATION
China
CT-3713: 3-channel RTD-PT100 temperature acquisition module Module features The module supports 3-channel RTD thermal resistance (PT100) temperature acquisition The module could be connected to a 2-wire or 3-wire PT100 temperature sensor The internal bus of the module and field input adopts magnetic isolation The module carries with 3 analog input channel LED indicator 15-bit ADC resolution
Request for a quoteSICHUAN ODOT AUTOMATION
China
IO Config V1.0.0.6(Fully with .NET4.0.rar|CT-2718 CT-2718: 8 channel relay output 2A/30VDC/60W Module features 8-channel relay normally on output 8 LED channel indicators Low on resistance (≤100mΩ) 250VAC/220VDC the max. switch voltage is 250VAC/220VDC
Request for a quoteSICHUAN ODOT AUTOMATION
China
CT-2228: 8 channel digital output/24VDC/ Source type Module features the module supports 8-channel digital output, output high level effective, and output voltage 24V the module could drive field equipment (relay, solenoid valve, etc.) the module internal bus and field output are isolated by optocoupler the module carries with 8 digital output channel LED indicator the module has the functions of thermal shutdown and overcurrent protection the module supports short circuit protection and overload protection
Request for a quoteSICHUAN ODOT AUTOMATION
China
CT-221F 16 channels digital output/24VDC/Sink type/output is 0V, the output low level is valid Module features the module supports 16 channels digital output, the output voltage is 0V and he output low level is valid. the module can drive field equipment (relay, solenoid valve, etc.) the internal bus and field output of the module both adopt electromagnetic isolation the module carries 16 digital output channel LED indicator the module has the function of thermal shutdown and over current protection
Request for a quoteSICHUAN ODOT AUTOMATION
China
CT-122F 16 channels digital input/0VDC/Source type/Input 0V, the input low level is valid Module features the Module supports 16 channels digital input, supports source input, the input voltage is 0V and the input low level is valid. the module could collect the digital output signal of field equipment (dry contact or active output). the module can be connected to a 2-wire or 3-wire digital sensor. the internal bus of the module and field input are isolated by optocoupler. the module supports input signal holding function, holding time can be set. the module carries with 16 digital input channel LED indicator. after adding counting submodule, the counting function is effective. each input channel of the module supports 32-bit counter with counting frequency <200Hz. the module could set the digital signal input filter time and counter byte transmission sequence.
Request for a quoteSICHUAN ODOT AUTOMATION
China
CT-222F 16 channel digital output/24VDC/source type/output 24VDC, the output high level is valid Module features the module supports 16 channels digital output, the output high level is valid, the output voltage is 24VDC. module can drive field equipment. (relay, solenoid valve, etc.) the internal bus of the module and field output are using opto-coupler. the module has 16 digital output channel LED indicator light. the module has the functions of thermal shutdown and overcurrent protection. the module supports short circuit protection and overload protection.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
SICHUAN ODOT AUTOMATION
China
CT-623F: 8-channel digital input /24VDC/ source or sink type & 8-channel digital output /24VDC/ source type Module features The module supports 8-channel digital input, and supports source type and sink type two-way input. The input voltage is 0V/24VDC. The module supports 8-channel digital output, Output high level valid, and the output voltage is 24VDC. Module input channel can collect digital output signal of field equipment. (dry contact or active output) The module input channel can be connected to the 2-wire or 3-wire digital sensor. Module input channel supports 32-bit counter for each channel, the counting frequency < 200Hz. The input channel of the module supports the signal maintenance function, and the maintenance time can be set. The input channel of the module can set the digital signal input filtering time and the byte transfer order of the counter. The input channel of the module can set the counting mode and counting direction independently.
Request for a quoteResults for
Cts - Import exportNumber of results
19 ProductsCountries
Company type