Electric and electronic components - Import export

Place of Origin: China Base Material: FR-4 Copper Thickness: 1/2OZ 1OZ 2OZ 3OZ Board Thickness: 0.8mm Min. Hole Size: 0.1mm Min. Line Width: 0.065mm Min. Line Spacing: 0.065mm Surface Finishing: HASL Application: Electronics Device Type: Customizable Solder mask: Black Material: FR4 CEM1 CEM3 height TG Color: Red Blue Green Black Testing Service: 100% Supply Ability: 25000 Square Meter/Square Meters per Month

Plastic and TPU car holder, 360 ° swivel and universal to hold your phone while driving. Simply clip the bracket to the vent and put your mobile phone (up to 7 pouces) on it.

NSPV surge protective device AC Surge protection device(SPD) is an indispensable device for lightning protection of electronic equipment. It is used to limit the instantaneous overvoltage of the power line and signal transmission line to the voltage range that the equipment or system can withstand, or A powerful lightning current drains into the ground to protect the protected equipment or system from impact and damage.

NSPV surge protective device DC SPD protect against lightning surge voltages in solar system (photovoltaic power supply system). These units must be installed in parallel on the DC networks to be protected and provide common and different modes protection. Its installed location are recommended at both ends of the DC power supply line (solar panel side and inverter/converter side), especially if the line routing is external and long.High energy MOVs equipped with specific thermal disconnectors and related failure indicators.

NSPV MCCB DC The moulded case circuit breaker has the protection devices of over load, short circuit and under voltage, it can protect the circuit and power equipment from broken. The MCCB has the features of small volume, high breaking capacity, short electric arcing and anti-vibration. It is the ideal product for application in land and ship.

NSPV MCCB DC The moulded case circuit breaker has the protection devices of over load, short circuit and under voltage, it can protect the circuit and power equipment from broken. The MCCB has the features of small volume, high breaking capacity, short electric arcing and anti-vibration. It is the ideal product for application in land and ship.

NSPV miniature circuit breaker enclosure box Features: IP66 waterproof; Easy operation; Exquisite design; Highly waterproof and dustproof; Flame-resistant Material.

NSPV miniature circuit breaker enclosure box Features: IP66 waterproof; Easy operation; Exquisite design; Highly waterproof and dustproof; Flame-resistant Material.

NSPV Solar(PV) Power Protection Fuse 1000VDC NSPV-25 type This series of specifications for the use of the physical, rated working voltage 1000V, rated current 1-30A electric line for overload or short circuit protection which comply with IEC60269-6 standard.

NSPV Stainless steel cable ties They have an unique ball locking with Plastic jetting mechanism that allow easily and quickly installed and High tensile strength; Non-flammability. Stainless steel cable ties are a quick effective way of securing cables.They can be used in virtually all indoor outdoor,heavy industrial and underground applications.

NSPV Terminal block 2P-20P Features: Heavy duty, corrosion resistant screws.

● The junction box uses the PPE/PA,High rigidity, high temperature resistance chemical resistance, wear resistance and pollution resistance ● The junction box uses the glue to seal, the waterproof effect is better, the fitting interior heat is better. ● This junction box is a three-part design, and the cable adopts horizontal outlet mode, which can reduce the cable bending stress, save the cable usage, reduce the power loss of PV module, and divide the influence of "hot spot effect" into three parts. The influence of high temperature on photovoltaic modules is reduced. ● The diode and the terminal adopt an integrated packaging mode, and the terminal uses red copper

NSPV 1500VDC Solar PV din rail fuse holder NSPV-63T type Features: TUV certified; High voltage and high current; Suitable for fuse 10/14*85mm; Standard IEC60269-6.

NSPV 1500VDC Solar PV din rail fuse holder NSPV-50L type Features: TUV approved; High voltage and high current; Suitable for fuse 10/14*85mm; Standard IEC60269-6.

NSPV Solar(PV) Power Protection Fuse 1500VDC This series of specifications for the use of the physical, rated working voltage 1500V, rated current 2A-50A electric line for overload or short circuit protection. Rated breaking capacity 20KA, products comply with IEC60269-1/GB13539-1 and IEC60269-6/GB13539-6 standards, and size for 10*85 or 10/14*85mm.

NSPV Solar fuse holder din rail 1000VDC NSDF38 type Features: Replaceable fuse; Flame retardant shell; A range of 10x38mm fuse links specifically designed for protecting photovoltaic strings; With mounting rails.

Wireway Fastener material: aluminum alloy 6061-T4 thread grade: rolled/cut 3/8-18 NPSM thread x 0.39 +/-0.04 inch size: cap outer diameter 0.995-0.997 inch, height 2.50±0.03 inch cap slot - width 0.062±0.010 inch, depth 0.093±0.010 inch Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.

5 inch Round TFT IPS LCD with high resolution provides clear and rich images, widely applied in commercial and smart home appliants. This Liquid Crystal Display has a built-in HX8399C controller. Optional custom solution with capacitive or resistive touchscreen. The material is RoHS compliant. Diagonal (inch): 5.0″ Resolution (pixel): 1080×1080 Display Type: IPS Display Mode: Transmissive Optimal View: Full View Touch Screen: Custom Module Dimensions (mm) (W x H x D): 136.53×132.20×1.98 Active Area (mm) (W x H): 127.00 x127.00 Luminance (cd/m2): 400 Interface: MIPI Driver IC: HX8399C Operational Temperature (°C): -20 ~ +70 Storage Temperature (°C): -30 ~ +80

Material: Amorphous, Semi-crystalline and Mineral Filled Semi-crystalline. PEEK (polyetheretherketone) Film Provides: ● High Temperature Performance ● Excellent Tribological Properties ● Broad Chemical Resistance ● High-Strength & Toughness ● Electrical Stability & Radiation Resistance ● Low Smoke & Toxic Gas Emission ● High-Purity, extremely low extractables Appication: ● Micro speaker diaphragm, dome tweeter. ● Presslire exchanger and senior oliaphragin. ● Aerospace high-speed rail insulation and TAB heat insulation components. ● Thrust washers for micro motors, gaskets for automobiles. ● High-temperature resistant label, pressure sensitive tape substrate. ● Insulation layer of electric vehicle battery. ● Flexible film surface heater. ● Wire, cable, insulation and wrcop sheaths.

EASY AND PORTABLE TAKING FOR UNIVERSAL USE

Manufacturing Process CNC Machining & Injection Molding PEEK performance Polyetheretherketone (PEEK) is a high-performance, engineering thermoplastic characterized by an unusual combination of properties. These properties range from high temperature performance to mechanical strength and excellent chemical resistance. Material Grade ARKPEEK-1000: 100%PEEK Produced from virgin polyetheretherketone resin and offers the highest toughness and impact resistance of all types. ARKPEEK-CF30: 30% Carbon Fiber + 70% PEEK Carbon fiber reinforcement lends the material a high level of rigidity and creep strength, high mechanical strength and heat conductivity values. ARKPEEK-GF30: 30% glass fiber + 70% PEEK Glass filled PEEK exhibits increased mechanical strength and high rigidity. ARKPEEK-MOD: 10% Carbon Fiber + 10% PTFE +10% Graphite high performance engineering plastic with product characteristics including excellent sliding and abrasion & wear resistance, high mechanical.

Built-in advanced infrared sensor, auto clamping firmly once place your phone. Mount on air vent or installed on dashboard with the suction cup. 10W fast charging with a Type C cable. Compatible with all mobile phones with Qi wireless charging function.

Material: custom size: according to drawings Our company (Huan-Tai) is rooted in China since mid-90’s. As one of the early runners, we bring value to the table through our capabilities in engineering, quality control and schedule management that meet the high expectations of overseas customers in stability, consistency and predictability. We focus on quality and consistency. Batch production are always consistent with sample. Our Quality assurance: 1. Non-destructive test (NDT): magnetic particle examination (MPE), ultrasonic examination (UE), liquid penetration examination (LPE), X ray. 2. Experienced inspector on dimensions, CMM dimension testing and other tools. 3. To maintain our reputation, we still have excellent return and claim policy even some rare defects. 4. Our prices are always competitive. 5. Spectrometers to assure the material.

bearing bush material: white POM size: diameter 17 +/- 0.10 mm, height 10 +/- 0.15 mm Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.

knuckle flanged housing material: aluminum alloy 6061 size: diameter 4.25 +/-0.01 inch, 2.50 +/-0.01 inch, height 1.50 +/-0.01 inch 4 through holes diameter 0.332 +/-0.005 inch surface roughness Ra 1.6 Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.

Brass Precision Turned Components by CNC lathe turning Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.

Special Machine Parts by CNC turning, milling Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.

restrictor, a part for pool heater outer diameter: 0.750 +/- 0.010 inch, inner through hole diameter 0.421 +/- 0.010 inch, length 0.700 +/- 0.010 inch, outer diameter of knurl: 0.690 +/- 0.010 inch mechanical straight knurls, angle tooth 900, circular pitch 0.049, number of teeth: 44 material: naval brass C48500 manufactured by CNC lathe turning & milling Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.

guiding shaft material: stainless steel 303 manufactured by CNC multi-axis lathe machining length: 204 mm diameter: 4 +0/-0.1 mm 3 threads: M3 2 threads on one end, 1 thread on the other end Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.