Chemical solvents - Import export

An agent designed to remove bitumen, tar, grease, grease, oil stains. CLEAN-BIT is used to remove stains from metal, steel, chrome, aluminum and painted surfaces. The agent is ideal for cleaning tools and equipment designed to work with heavy hydrocarbon fractions such as asphalt, tar. CLEAN-BIT deeply penetrates the surface to be cleaned, reacts with the oil stains dissolving them and at the same time breaking down their structure •high efficiency of action, •easy to use, •removes even old dried stains, •wide range of action on the type of stains. APPLICATION Apply the product to the stains with a microfiber cloth. Gently wipe the soiled surface. For heavier dirt, apply the product directly to the surface to be cleaned and wait 5 minutes. After this time, wipe off the stains with a microfiber cloth.

Solvents for applications like: cosmetics, cleaning, coatings and polyurethanes.

Suction and discharge of nearly all corrosive chemical products: strong acids, solvents with high aromatic content, chlorinated or oxygenated solvents, aromatic hydrocarbons, etc. Electric properties: UPE pipe and conductive rubber coatings, R ≤ 1 MOhm/lg.

60% POLYPROPYLENE / 40% POLYESTER 1700 g/m² Pile Height: 7 mm Size: 50 x 80 cm 320000 Thread Point • Vacuum Cleaner can be used • Do not use ultra-strong chemicals such as oil solvent, softener, high-dose bleach or bleach to clean the product. • For longer usage, do not dry the product in the dryer. • Do not expose the product to direct sunlight.

60% POLYPROPYLENE / 40% POLYESTER 1700 g/m² Pile Height: 7 mm Size: 160 x 230 cm 320000 Thread Point • Vacuum Cleaner can be used • Do not use ultra-strong chemicals such as oil solvent, softener, high-dose bleach or bleach to clean the product. • For longer usage, do not dry the product in the dryer. • Do not expose the product to direct sunlight.

60% POLYPROPYLENE / 40% POLYESTER 1700 g/m² Pile Height: 7 mm Size: 140 x 200 cm 320000 Thread Point • Vacuum Cleaner can be used • Do not use ultra-strong chemicals such as oil solvent, softener, high-dose bleach or bleach to clean the product. • For longer usage, do not dry the product in the dryer. • Do not expose the product to direct sunlight.

60% POLYPROPYLENE / 40% POLYESTER 1700 g/m² Pile Height: 7 mm Size: 120 x 170 cm 320000 Thread Point • Vacuum Cleaner can be used • Do not use ultra-strong chemicals such as oil solvent, softener, high-dose bleach or bleach to clean the product. • For longer usage, do not dry the product in the dryer. • Do not expose the product to direct sunlight.

60% POLYPROPYLENE / 40% POLYESTER 1700 g/m² Pile Height: 7 mm Size: 80 x 150 cm 320000 Thread Point • Vacuum Cleaner can be used • Do not use ultra-strong chemicals such as oil solvent, softener, high-dose bleach or bleach to clean the product. • For longer usage, do not dry the product in the dryer. • Do not expose the product to direct sunlight.

60% POLYPROPYLENE / 40% POLYESTER 1700 g/m² Pile Height: 7 mm Size: 80 x 300 cm 320000 Thread Point • Vacuum Cleaner can be used • Do not use ultra-strong chemicals such as oil solvent, softener, high-dose bleach or bleach to clean the product. • For longer usage, do not dry the product in the dryer. • Do not expose the product to direct sunlight.

60% POLYPROPYLENE / 40% POLYESTER 1700 g/m² Pile Height: 7 mm Size: 100 x 300 cm 320000 Thread Point • Vacuum Cleaner can be used • Do not use ultra-strong chemicals such as oil solvent, softener, high-dose bleach or bleach to clean the product. • For longer usage, do not dry the product in the dryer. • Do not expose the product to direct sunlight.

60% POLYPROPYLENE / 40% POLYESTER 1700 g/m² Pile Height: 7 mm Size: 100 x 200 cm 320000 Thread Point • Vacuum Cleaner can be used • Do not use ultra-strong chemicals such as oil solvent, softener, high-dose bleach or bleach to clean the product. • For longer usage, do not dry the product in the dryer. • Do not expose the product to direct sunlight.

60% POLYPROPYLENE / 40% POLYESTER 1700 g/m² Pile Height: 7 mm Size: 100 x 150 cm 320000 Thread Point • Vacuum Cleaner can be used • Do not use ultra-strong chemicals such as oil solvent, softener, high-dose bleach or bleach to clean the product. • For longer usage, do not dry the product in the dryer. • Do not expose the product to direct sunlight.

Propylene, plastic table, chair production, plastic kitchenware production, ring production, automotive industry, plastic case production, construction industry (insulation, crochet, mat, conical foot etc.), bucket, It is used in flower pot and various toy industry. Monomer of propylene Polypropylene obtained by polymerizing chemical solvents It is extremely resistant to (acids and bases). Natural, milk white and colored we have varieties available. Coloring is done on request.

Propylene, plastic table, chair production, plastic kitchenware production, ring production, automotive industry, plastic case production, construction industry (insulation, crochet, mat, conical foot etc.), bucket, It is used in flower pot and various toy industry. Monomer of propylene Polypropylene obtained by polymerizing chemical solvents It is extremely resistant to (acids and bases). Natural, milk white and colored we have varieties available. Coloring is done on request.

Propylene, plastic table, chair production, plastic kitchenware production, ring production, automotive industry, plastic case production, construction industry (insulation, crochet, mat, conical foot etc.), bucket, It is used in flower pot and various toy industry. Monomer of propylene Polypropylene obtained by polymerizing chemical solvents It is extremely resistant to (acids and bases). Natural, milk white and colored we have varieties available. Coloring is done on request.

Propylene, plastic table, chair production, plastic kitchenware production, ring production, automotive industry, plastic case production, construction industry (insulation, crochet, mat, conical foot etc.), bucket, It is used in flower pot and various toy industry. Monomer of propylene Polypropylene obtained by polymerizing chemical solvents It is extremely resistant to (acids and bases). Natural, milk white and colored we have varieties available. Coloring is done on request.

Propylene, plastic table, chair production, plastic kitchenware production, ring production, automotive industry, plastic case production, construction industry (insulation, crochet, mat, conical foot etc.), bucket, It is used in flower pot and various toy industry. Monomer of propylene Polypropylene obtained by polymerizing chemical solvents It is extremely resistant to (acids and bases). Natural, milk white and colored we have varieties available. Coloring is done on request.

Propylene, plastic table, chair production, plastic kitchenware production, ring production, automotive industry, plastic case production, construction industry (insulation, crochet, mat, conical foot etc.), bucket, It is used in flower pot and various toy industry. Monomer of propylene Polypropylene obtained by polymerizing chemical solvents It is extremely resistant to (acids and bases). Natural, milk white and colored we have varieties available. Coloring is done on request.

Propylene, plastic table, chair production, plastic kitchenware production, ring production, automotive industry, plastic case production, construction industry (insulation, crochet, mat, conical foot etc.), bucket, It is used in flower pot and various toy industry. Monomer of propylene Polypropylene obtained by polymerizing chemical solvents It is extremely resistant to (acids and bases). Natural, milk white and colored we have varieties available. Coloring is done on request.

Safe energy and data transmission The igus® Chainflex® cable range offers a choice of over 850 different cables, available from stock. A main focus of the range are the data and bus cables. Solutions based on copper, glass or plastic fiber optic cables are provided for almost all bus systems in industrial use. We continue to provide you with all supply cables for your drive systems such as motor cables with and without brake/tacho cables and the matching feed cables. Ready assembled with plugs and sockets on request. Cost-reducing assembly The use of pre-assembled E-ChainSystems® enables expensive assembly hours at the place of installation to be considerably reduced. Functionally tested systems guarantee that plant components are soon put into operation. Assembly service We would be pleased to send you an offer for complete solutions, including all assembly services. You do not tie up your own resources and you have a trouble-free energy supply system for the future at a fixed price. LBT FLIZZ® - High speeds and accelerations Travel distances up to 120m, travel speed up to 8 m/s Suitable for moving or stationary controls, ideal for all bus systems When light weight is required When quiet, maintenance-free operation is required When rust-proof property is required At -10°C to +60°C constant temperature At accelerations over 10 m/s² Energy supply system for all media, not only electrical Also suitable for outdoor use (with reduced load data) Your benefit from LBT FLIZZ® Guaranteed service life Cost-effective compared with conventional energy supply systems Cable protected against dirt, rain, sun, ice, snow and leaves Insensitive to wind and motion Good resistance to chemicals, solvents, etc. Use of special cables possible, e.g. servo drive cables, fiber optic cables, bus systems etc. almost maintenance free Quick and easy installation due to delivery as a ready-assembled system Easy integration with existing plants Cable length 50% of the travel distance No central cable junction No effort required to maintain carriages Sewage treatment plant Longitudinal scrapers Sand traps Rain water overflow reservoir Galvanizing equipment Cranes Plant construction Space-saving and compact energy supply with LBT FLIZZ® - low maintenance system, delivered pre-fitted with ready-assembled igus® E-Chain Energy supply system protected from wind and weathering. The used materials are weather-resistant, as well as resistant against most chemicals, oils, fats, coolants and solvents Solid plastic with powder-coated support tubes Modular assembly: the system can be enclosed with intermediate panels! Can be delivered pre-fitted Variable fields, which are simply screwed on top of each other Glide rail integrated in the profile

Description: The double diaphragm pump is suitable for industrial applications as well as for emptying drums, IBCs and tanks. * typical applications: 200 l drums, paint circulation and feeding, feeding of chemicals, solvents, acids and liquid soap * integrated muffler up to model size AODD 1" * highly resistant TFM (PTFE) diaphragms (modified PTFE) Features & Benefits * high hydraulic performance * maintenance-optimised design and simple installation * self-priming (even when dry) * reinforced elastomers and thermoplastic diaphragms * absolutely oil-free * non-stalling operation

Description: The double diaphragm pump is suitable for industrial applications as well as for emptying drums, IBCs and tanks. * typical applications: 200 l drums, paint circulation and feeding, feeding of chemicals, solvents, acids and liquid soap * integrated muffler up to model size AODD 1" * highly resistant TFM (PTFE) diaphragms (modified PTFE) Features & Benefits: * high hydraulic performance * maintenance-optimised design and simple installation * self-priming (even when dry) * reinforced elastomers and thermoplastic diaphragms * absolutely oil-free * non-stalling operation

Description: The double diaphragm pump is suitable for industrial applications as well as for emptying drums, IBCs and tanks. * typical applications: 200 l drums, paint circulation and feeding, feeding of chemicals, solvents, acids and liquid soap * integrated muffler up to model size AODD 1" * also available in the Pure version (5224-410) Features & Benefits * high hydraulic performance * maintenance-optimised design and simple installation * self-priming (even when dry) * absolutely oil-free * non-stalling operation * conductive version approved according to ATEX Directive 2014/34/EU, Category 2

Description: The double diaphragm pump is suitable for industrial applications as well as for emptying drums, IBCs and tanks. * typical applications: 200 l drums, paint circulation and feeding, feeding of chemicals, solvents, acids and liquid soap * integrated muffler up to model size AODD 1" * also available in the Pure version (5224-410) Features & Benefits * high hydraulic performance * maintenance-optimised design and simple installation * self-priming (even when dry) * absolutely oil-free * non-stalling operation * conductive version approved according to ATEX Directive 2014/34/EU, Category 2

Description: The double diaphragm pump is suitable for industrial applications as well as for emptying drums, IBCs and tanks. * typical applications: 200 l drums, paint circulation and feeding, feeding of chemicals, solvents, acids and liquid soap * integrated muffler up to model size AODD 1" * highly resistant TFM (PTFE) diaphragms (modified PTFE) Features & Benefits * high hydraulic performance * maintenance-optimised design and simple installation * self-priming (even when dry) * reinforced elastomers and thermoplastic diaphragms * absolutely oil-free * non-stalling operation

Description: The double diaphragm pump is suitable for industrial applications as well as for emptying drums, IBCs and tanks. * typical applications: 200 l drums, paint circulation and feeding, feeding of chemicals, solvents, acids and liquid soap * integrated muffler up to model size AODD 1" * highly resistant TFM (PTFE) diaphragms (modified PTFE) Features & Benefits * high hydraulic performance * maintenance-optimised design and simple installation * self-priming (even when dry) * reinforced elastomers and thermoplastic diaphragms * absolutely oil-free * non-stalling operation

With fully automatic robots, INNORAPID is able to produce top quality molded parts within 10 workdays. - Lower Costs Piece price is significantly lower with molding vs other processes, particularly as production quantities increase into the thousands. - Strength Molded parts generally perform better than the same CNC Machined parts from the same material. Selection of the resins allow for a wide range of corrosion resistance and chemical and solvent compatibility. - High-precision Molds are CNC machined to high precision, high tolerances and are able to produce thousands of identical parts with very small and intricate details.

With fully automatic robots, INNORAPID is able to produce top quality molded parts within 10 workdays. - Lower Costs Piece price is significantly lower with molding vs other processes, particularly as production quantities increase into the thousands. - Strength Molded parts generally perform better than the same CNC Machined parts from the same material. Selection of the resins allow for a wide range of corrosion resistance and chemical and solvent compatibility. - High-precision Molds are CNC machined to high precision, high tolerances and are able to produce thousands of identical parts with very small and intricate details

With fully automatic robots, INNORAPID is able to produce top quality molded parts within 10 workdays. - Lower Costs Piece price is significantly lower with molding vs other processes, particularly as production quantities increase into the thousands. - Strength Molded parts generally perform better than the same CNC Machined parts from the same material. Selection of the resins allow for a wide range of corrosion resistance and chemical and solvent compatibility. - High-precision Molds are CNC machined to high precision, high tolerances and are able to produce thousands of identical parts with very small and intricate details