Chemical process engineering - Import export

In petrochemical and chemical process engineering, screw pumps, acting as displacement pumps, offer hydraulic characteristics which make them indispensable for the entire viscosity range. In chemical applications in particular, the high suction force and the gentle handling of the fluids to be pumped are the outstanding features of this type of pump. In general, all of our pumps can be used in this field, but the most common one is the two-rotor pump. Leistritz screw pumps are used to pump clean or slightly abrasive, low and high viscosity fluids with lubricity from poor to good, such as: additives, bitumen, resins, crude oil, greases, benzenes, adhesives, silicates, isocyanates, tar, polyols, asphalt, paints/varnishes, paraffin, polymers, and various other chemical products.

The sliding gate valve type 8040 in reinforced design and long construction is universally applicable for neutral and aggressive media in the chemical industry, process engineering and plant construction. This sliding gate valve with its small stroke achieves a very high switching capacity with extremely short switching times.

The sliding gate valve type 8041 in the short design is universally applicable for neutral and aggressive media in the chemical industry, process engineering and plant design. This sliding gate valve with its small stroke achieves a very high cycle capacity combined with extremely fast cycle times. Metal bellows Limit switch Pilot valve Stroke limitation . . .

The sliding gate valve type 8040 in the long design is universally applicable for neutral and aggressive media in the chemical industry, process engineering and plant construction. This sliding gate valve with its small stroke achieves a very high switching capacity with extremely short switching times.

The sliding gate control valve type 8043 in a reinforced version and long design with piston actuator and integrated positioner is due to its compact design universally applicable for neutral and aggressive media in the chemical industry, process engineering and plant design. Due to the direct and backlashfree installation of the positioner on that piston actuator, these valves have no exposed moving parts and are characterized by a high control quality and control dynamics. Digital positioner type 8049 Electropneumatic positioner type 8047 Pneumatic positioner Positioner with integrated process controller Metal bellows Limit switch Position feedback Pilot valve . . .

The sliding gate control valve type 8043 in long design with piston actuator and integrated positioner is due to its compact design universally applicable for neutral and aggressive media in the chemical industry, process engineering and plant construction. Due to the direct and backlashfree installation of the positioner on that piston actuator, these valves have no exposed moving parts and are characterized by a high control quality and control dynamics. Digital positioner type 8049 Pneumatic and electropneumatic positioner type 8047 Positioner with integrated process controller type 8049 IPC Positioner type 8047 and type 8049 also in explosionproof version Metal bellows Limit switch Position feedback Pilot valve . . .

The gas cyclone belongs to the mostly applied technical separators, because it has applicationwise some fundamental advantages. One of them is certainly the fact that its construction does not show any movable components. For the large variety of different kinds of dispersed (particulate) phases (for example dust particles, metal chips, wooden waste, liquid droplets) and different gas conditions (pressure, temperature) the lay out and computation of a cyclone is still a complex task. Suvis has specialised in the development and lay out of cyclone separators and can offer professional solutions and consulting in the area of gas cyclones. Many years of experience gained through numerous cyclone development projects results in optimal solutions for our customers. A cyclone separator applies centrifugal forces and represents an effective apparatus for separating gas, liquid or solid particles from a continuous phase in chemical, process or environmental engineering.

The B80 KME series was developed as a wet-installed centrifugal immersion pump for stationary use in tanks and basins. The direct-coupled pump with plain bearings is suitable for pumping and circulating neutral and chemically aggressive liquids in the chemical industry and process engineering, in electroplating and surface technology, in washing systems and water treatment plants, for sump drainage in industrial and municipal waste disposal plants or as a circulation pump in gas scrubbers and heat exchangers. * with various plain bearing designs * available in immersion depths from 600 - 1500 mm Features & Advantages * Compact dimensions * Abrasion resistant material combinations possible * Extremely low-vibration and low-wear operation * All wetted parts made of corrosion resistant plastic * Self-centering alignment in the bearing shell

A further area of activity of Suvis is the development and application of modern numerical methods for the calculation (prediction) of flows using CFD in industry, science etc. Our employees are especially trained in view of technical applications of numerical flow simulations. Within the recent years we conducted several projects in the area of multiphase flows. We dealt with applications in the optimisation of processes in chemical engineering, the transport of particles, gas cleaning and particle separation from gases and liquids, and the calculation and optimisation of cyclone separators. We apply powerful commercial software tools like grid generators in order to generate numerical grids using CADdata in a short time for even complex applications. Also, for flow calculations and the evaluation of 3D flow fields we apply powerful software solutions. Furthermore, for certain individual problems we apply codes we have developed our selves.

The B80 HME series is a design with bearingless cantilever construction that is directly coupled to the IEC Motor. Specially designed for plant engineering and confined installation conditions. It can be operated in dry installation next to the tank, thus facilitating access for maintenance and repair work. The pump is suitable for pumping /circulating neutral, corrosive and mechanically contaminated liquids. However, it can also be used in stationary installation in the chemical industry and process engineering, in surface and electroplating technology and in gas scrubbers. * temporarily also possible in dry running * directly coupled in bearingless cantilever design * available in immersion depths from 275 - 450 mm Features & Advantages * Service friendly dry running installation * Extremely low vibration and wear operation * Self-centering alignment in the bearing shell * All wetted parts made of corrosion resistant plastic

347 (UNS S34700/1.4550) is a fully austenitic niobium stabilised stainless steel. The addition of Niobium reduces the creation of carbide precipitation in service between 430 to 900 degrees C and during welding processes and increases the mechanical strength of the material. This grade has good resistance to oxidation and corrosion along with good creep strength and can be used at temperatures where carbide precipitation may occur in non-stabilised grades e.g., 304. It is used principally in aerospace exhaust manifolds and engine components, chemical processing equipment running at high temperatures and in nuclear processing piping. Please note that we have a minimum order value of £10,000.

Our Gas Quality Competence Centre answers chemical analysis and process engineering questions in all matters connected with the transportation and use of natural gas. Our Competence Centre uses high-performance methods and processes for the analysis of gases and accompanying substances and can draw on many years of experience in the operation of our transmission system and cooperation with customers. The full range of our laboratory services if of course also available to other companies and organisations. They include: Determination of natural gas compositions in accordance with DVGW Code of Practise G 260 Natural gas analyses up to C14 Determination of trace concentrations of accompanying substances Water analyses on preheaters in accordance with DVGW Code of Practise G 495 Natural gas safety data sheet and much more Our Gas Quality Competence Centre is certified to DIN EN ISO 9001. The natural gas analysis laboratory is accredited to DIN EN ISO/IEC 17025.

Our fields of expertise are in areas where processes are influenced by temperature changes. We act as a reliable partner always there where electric heating technology, integrated with functional process control, requires high operational safety.

Molecular formulaC17H36O2 Molecular weight272.4 CAS number22174-70-5 EC number244-815-1 IUPAC name3-({[(2-Ethylhexyl)oxy]methoxy}methyl)heptane EC name3,3'-[Methylenebis(oxymethylene)]bisheptane