Chemical centrifugal pumps - Import export

FLUX centrifugal immersion pumps are used when larger flow rates, continuous running or special immersion lengths are required. They are especially suitable for pumping and circulating aggressive and abrasive media. There is a choice of different materials available depending on the chemical and thermal requirements. In addition sealless and horizontal versions are available. FLUX centrifugal immersion pumps are individually configured and manufactured according to the technical requirements in each case.

The TMR series is a reliable magnetic drive pump that easily handles critical operating conditions due to its patented magnetic axial thrust compensation. * Drive via magnetic coupling with patented magnetic axial thrust compensation * Typical applications: Acids, alkalis, acid and alkali mixtures, solvents, alkaline degreasing baths, electroplating baths, photographic chemicals Features & Advantages * Variable connection options * Compact dimensions, performance in line with requirements * Also for liquids with high density * Due to "magnetic axial thrust balancing" the bearing system "R" is suitable for dry running * Motor and pump are mechanically separated * Connections with thread or flange

We manufacture rough or fully machined shaft liner and wearing ring for vertical pumps in duplex stainless steel Excellent wearing properties and resistance to corrosion. Very high hardness due to special heat treatment processes.

We manufacture rough or fully balancing & sealing ring in stainless steels and copper based alloys. Large diameter and thin section parts. High dimensional stability resulting from the low and balanced internal stress.

We manufacture rough or fully machined column pipe in duplex steel and aluminium bronze. Excellent weldability and corrosion resistance due to the cleanliness of the material resulting from the centrifugal casting process.

Water driven. No need for electricity. Precise dosage independent of fluctuations in water flow or pressure. PVDF body available for aggressive products. Easy changing of dosing rate.

Installed directly in the water supply line, Dosatron pumps operate without electricity, using water pressure as its sole power source. On its way through, the water activates the plunger, which takes up the required percentage of concentrate. Inside the pump, the concentrate is mixed with water. The water pressure forces the solution downstream. Once set, the pump requires no further attention. The dose of concentrate will always be strictly proportional to the volume of water entering the pump, whatever variations in flow or pressure may occur in the main line.

Immersion Pumps are plain centrifugal pumps with the impeller fitted on the driving shaft extension. They are mounted on top of the container, the pump extension being immersed in the coolant. The maximum coolant level must stay a few mm/inches below the mounting flange. The STA serie offers a (SAE) flange with pressure gauge connection port. The flange can be rotated for either horizontal or vertical pipe connections. Volumetric delivery: up to 5000 l/min Delivery head: up to 120 m Please contact us for delivery quantity

Miniature Centrifugal Pumps of the BMK series have been desined for clean watercircuits of up to 160 degree C fluid temperature and up to 7 bar of system pressure. The pumps are equipped with a magnetic coupling. The pumps can be mounted vertically or horizontally. The specific design allows the pumps to operate wear poor. Impellers: peripheral Types of fluid: Industry water Volumetric delivery up to 55 l/min Delivery head up to 58 m Please contact us for delivery quantity

Chemical pump with electrical temperature control. The CHEM series is designed to be easy to maintain. Separate pump covers allow a quick inspection of the inner workings from both sides of the pump. To adjust the axial clearance we use shims which can be varied according to process parameters. Chemical pumps of the CHEM series are offered as standard versions with components made of stainless steel or as special versions with coated or ceramic materials. To bring or maintain the pump at process temperature, two temperature control variants can be used, electric and hydraulic.

Chemical pump hydraulically temperature controlled for a wide range of applications. This ranges from organic and inorganic chemicals to food oils, polymers and pharmaceutical products. A wide-ranging modular system provides optimum material combinations for corrosive or abrasive media.

Chemical pumps of the CHEM series are used as a modified version as submersible pumps for emptying drums and containers. For example, chemicals such as liquid sulphur are pumped at temperatures up to 150 °C. The series is well suited to transfer low-viscosity media at relatively high pressures. — For viscosities up to 1.000.000 mPas — Temperatures up to 500 °C as special version — Differential pressures up to 120 bar — Suction pressures from vacuum to 15 bar Submersible suspension pumps are designed in such a way that the pumps are submerged in the container with the medium and the medium is sucked in via the flangeless suction side. The medium then enters the process from the tank via a pipe from the discharge side. Submersible suspension pumps are often made of special or stainless steels. A special feature of these pumps, as a rule no additional seals are required on the pump. Only the tank is sealed towards the atmosphere.

The CHEM gear pump series was developed especially for the requirements of the chemical industry. The series is used for pumping and transferring low to medium viscosity media. The CHEM series is extremely flexible in its design and areas of application. Technical details: — Suction pressures from vacuum up to 15 bar and suction pressures with magnetic coupling up to 25 bar — Delivery volume 1.28 cc/rev to 12,000 cc/rev — Temperatures up to 300 degrees — As special pumps for the chemical industry according to customer specifications — Viscosities up to 1.000.000 mPas

We bring our success, our wealth of experience and our know-how to the chemical industry. The requirement to pump viscous and sticky substances out of a vacuum is no easy task. However, our CHEM design easily meets this requirement. The requirements for dosing and transfer pumps as well as for distillate pumps in the CBD segment, for example, also match our CHEM design so that you get a pump solution for your entire distillation process with just one pump. More than 600 pumps of this design are running reliably in a wide range of cannabis applications at a number of our US customers. This robust and reliable pump series is used worldwide in demanding processes in the chemical and pharmaceutical industries.

Brand Services represents German ZUWA-Zumpe company in Poland. German ZUWA-Zumpe company supplies the pumps on Polish market. German ZUWA-Zumpe company delivers their pumps to OEM producers. The scope of pumps: Impeller pumps Drill powered pumps Pumps and refuelling systems for diesel Oil pumps AdBlue pumps Gasoline pumps Barell and nad pumps Waste water pumps Side channel pumps Diaphragm pumps PTO pumps Hand pumps

A pump is a mechanical device for moving a fluid from a lower to a higher location, or from a lower to a higher pressure area. The fluid can be any type of liquid or gas, and pumps may be classified in many ways according to their purpose, specifications, environment, design, etc. Pumps are used in a wide range of industrial and residential applications. Pumping equipment is extremely diverse, varying in type, size, and materials of construction. Classifications and Types: Pumps may be classified on the basis of the applications they serve, the materials from which they are constructed, the liquids they handle, and even their orientation in space. All such classifications, however, are limited in scope and tend to substantially overlap each other. A more basic system of classification first defines the principle by which energy is added to the fluid, goes on to identify the means by which this principle is implemented, and finally delineates specific geometries.

The ORCUT TMS, TES, ES and KM grinder pumps are manufactured by ORPU Pumpenfabrik GmbH, an oddesse subsidiary in Oranienburg. These pumps are characterised by a tried-and-tested, effective multiple-grinder system and are operated with motors of efficiency class IE2. ADVANTAGES - Available in standard and explosion-proof versions - Blockage-free operation, either through the use of a patented cutting system or by ensuring the passage of large particles - Stationary or mobile use - Wet or dry installation - DIN flange of sizes DN 32 through DN 150 for PN 6 and PN 10 can be used - Spiral hose can be connected - Comprehensive accessories - Highly efficient - Cost-efficient installation - High operating safety - Long service life - Effluent containing fibres and solids, faeces - Delivered medium temperatures up to 40 °C - Comprehensive service network PERFORMANCE RANGE Delivery volume Q = … 520 m³/h Delivery height H = … 60 m Rated wattage P = … 26 kW

oddesse-propeller pumps are used for irrigation and drainage of agricultural areas, water-level regulation, oxygen enrichment of breeding water at fisheries, trimming of ships, ferries and tankers and so on. EXECUTIONS - Single-stage centrifugal pumps with open semi-axial impeller - Submersible, rewindable and water-filled motors with protection level IP 68 - Motor cooling through pumped medium that flows around it - Water-lubricated radial and axial slide bearings - Encapsulation of rewindable motor via mechanical seal - Optimal motor filling guaranteed by a volume-compensation system - Rubber-sheathed electrical cable, watertight connected - Continuous operation, switching operation or frequency control - Tandem operation - High-quality materials for application in service, industrial and seawater PERFORMANCE RANGE Delivery volume Q = … 1,000 m³/h Delivery height H = … 24 m

Blood centrifuge is a test for blood group serology, blood type routine test, micro surgery Gel, erythrocyte washing and immunoassay development dedicated centrifuge.Set a variety of different test procedures, control prec Features: Blood centrifuge is a test for blood group serology,blood type routine test,micro surgery Gel,erythrocyte washing and immunoassay development dedicated centrifuge.Set a variety of different test procedures,control precision,easy to use

We supply; - Sampi RVP Fuel Vane Pumps - Mouvex Blackmer CC8 Cargo Pumps - ATEX Centrifugal Fuel Pumps - RVP Fuel & oil motor pumping sets

Main products: pump housing, shaft, liner, wearing ring, colomn pipe, sealing ring, cover, pump impeller, PELTON runner, FRANCIS runner, KAPLAN runner, pump casing... Alloys: - bronze and brass - low allied and pure copper - aluminium bronze - aluminium - stainless steel - Ni-based and special alloys