Check valves for industries - Import export

Ball check valve Ductile iron body Blue epoxy anti-corrosion coating Nominal pressure 16Bars ISO PN10 and PN16 drilled flanges up to DN 150, from DN 200, PN 10 or PN16 drilling to be specified

Body- Cover : GG-25 Cast Iron (EN GJL 250) / Disc : GG-25 Cast Iron (EN GJL 250) / Seats : Brass - Bronze / Connection : Flanged / Max. Working Temp. : 120 ºC / Max. Working Pressure : 16 Bar *** Applications Area : Hot and Cold Water Systems / All non-Asidic Fluids

Disco Check Valve / Wafer Type ** Body : MS 58 Brass - From( DN15-DN100) / Ductile Iron (EN GJS 400-15) - From (DN125-DN200) / Spring, Disc, Centering : Stainless Steel / Max. Working Temp. : 120 ºC / Max. Working Pressure : 16 Bar / Connection Flanged- Wafer Type *** Applications Area : Hot and Cold Water Systems / Compressed Air System / Non-acidic and non-flammable liquid fluids / Liquid Fuel Systems

Design: API6D / BS1868 Pressure Rating: 150/300/600/900/1500/2500# Face to face length: ASME B16.10 Valve end connections: Flanged RF or RTJ to ASME B16.5 Welded BW to ASME B16.25 Marking: MSS SP-25 Inspections & Tests: API598 Primer painted for protection during storage and transport (carbon steel body/bonnet) Product may be compliant with Pressure Equipment Directive PED, up to category III for European territory

Piston valves for petrol or oil lines. The valves prevent the line from draining after the pump has been switched off. This type of valve is only used in applications above 5 bar. The opening pressure is set to the corresponding counter pressure.

The valve closes totally the pipe line when back flow occurs. The valve is complete with an hydraulic control circuit able to regulate operation’s speed during closing, preventing surge.

Protection of hydraulic networks Axial check valve Ductile iron body Nominal pressure 16Bars ISO PN10 and PN16 drilled flanges up to DN 150, from DN 200, PN 10 or PN16 drilling to be specified

We manufacture valves in aluminium bronze, delivered "as cast" , rough or fully machined according to international quality standards

DOUBLE FLANGED, ENGINE COMPATIBLE BUTTERFLY VALVE

Double Plate Check Valve / Body : GG-25 Cast Iron (EN GJL 250) / Disc : Ductile Iron (EN GJS 400-15) / Max. Working Temp. : 110 ºC / Max. Working Pressure : 16 Bar *** Applications Area : Hot and Cold Water Systems / Irrigation and Water Supply Lines / Purification System and Waste Water Discharge / Fire Protection Lines / Oil- Cooling Cycles

Unidirectional valve used for temperatures from −60°C to +550°C, pressures up to PN 400 and designed to prevent from reverse flow of the service fluid. • DN 50 – DN 400 • PN 16 – PN 400

Non-Return Valves WITT non-return valves protect plants, pipelines and outlet points against reverse gas flow and meet all relevant standards and regulations. The product range of non-return valves includes a large choice of nominal sizes (up to DN200) and flow rates (0.35 – 106 SCFH). The sophisticated valve technology of WITT non-return valves provides small pressure drops making them also suitable for applications with smallest opening pressures. A high-quality sealing system with elastomeres prevents leakages, and dirt filters at the inlet point assure long service life of the non-return valves. Some non-return valve models can also be used as flashback arrestors. All non-return valves can be mounted in any orientation, are available with all connections, in brass and stainless steel and are suitable for almost all technical gases.

We focus on quality and consistency. Batch production are always consistent with sample. Our Quality assurance: 1. Non-destructive test (NDT): magnetic particle examination (MPE), ultrasonic examination (UE), liquid penetration examination (LPE), X ray. 2. Experienced inspector on dimensions, CMM dimension testing and other tools. 3. To maintain our reputation, we still have excellent return and claim policy even some rare defects. 4. Our prices are always competitive. 5. Spectrometers to assure the material.

Non-Return Valves WITT non-return valves protect plants, pipelines and outlet points against reverse gas flow and meet all relevant standards and regulations. The product range of non-return valves includes a large choice of nominal sizes (up to DN200) and flow rates (0.35 – 106 SCFH). The sophisticated valve technology of WITT non-return valves provides small pressure drops making them also suitable for applications with smallest opening pressures. A high-quality sealing system with elastomeres prevents leakages, and dirt filters at the inlet point assure long service life of the non-return valves. Some non-return valve models can also be used as flashback arrestors. All non-return valves can be mounted in any orientation, are available with all connections, in brass and stainless steel and are suitable for almost all technical gases.

ES-4212 HYDRAULIC CHECK BUTTERFLY VALVE

TILTING CHECK VALVE

Brass Check Valve ( Vertical Type - Swing Type) ** / Body : Brass ( CW617N-CuZn40Pb2) / Connection : Threaded / Body Type : Vertical & Swing Type / Disc : Polymer Plastic For Vertical, Brass For Swing / Max. Working Temp. : 90 ºC / Max. Working Pressure : 10-16 Bar *** Application Areas : Hot and Cold Water Systems / Compressed Air System / Non-acidic and non-flammable liquid fluids

Our Brass valves from ACL are employed in a large variety of industrial sectors: water treatment, electrical appliances, industrial process, heating and air-conditioning, medical equipment, automotive, textile, food, pneumatic and many more.....

Our Stainless Steel valves from ACL are employed in a large variety of industrial sectors: water treatment, electrical appliances, industrial process, heating and air-conditioning, medical equipment, automotive, textile, food, pneumatic and many more.....

Please refer to our website for the various specifications and documentation https://afcvalves.co.uk/products/#direct-acting

Please refer to our website for the various specifications and documentation https://afcvalves.co.uk/products/#strainers

Please refer to our website for the various specifications and documentation https://afcvalves.co.uk/products/#marine

Please refer to our website for the various specifications and documentation https://afcvalves.co.uk/products/#ball-valves

• Fully engaged rolled bonnet threads provide protection from process media by a metal body / bonnet seal. • Swaged self centering non rotating Duplex stem point ensures positive seat closure under all conditions. • Rolled stem threads protected from process media by fully adjustable sandwich’ packed gland. • Fully back seating - bonnet with anti blowout stem. • Totally encapsulated dust seal gives greater stem thread protection. • Vibration proof handle with positive location and excess torque break feature. • NACE MR-01-75 standard. • Fully developed field mounting system for all products. • All options available. Full range of materials, thread types and sizes. • Conformance to ASME B31.1 • Pressure - Temperature ratings as listed in ASME/ ANSI B 16.34 Class 2500. • All Pressure wetted parts fully traceable and certified in accordance with EN10204 31B. • Material of construction as listed in ASME/ANSI B 16.34. • Guaranteed 4 time factors of safety at Class 2500.

Main products: valve body, housing, gate for butterfly valves, ball trunnion bearing & ball for trunnion mounted ball valve, flange, seat for ball and butterfly valves, cage for pressure control valves,... Alloys: - bronze and brass - low allied and pure copper - aluminium bronze - aluminium - stainless steel - Ni-based and special alloys

Desing Size : VARNASAN Connection: DIN 259 BSP ve NPT Actuator Adaptation : ISO 5211 Technical Features Working Pressure : PN16 - PN40 Working Temperature: -300C / + 1800C Usage: Actuator connected and handle option Certificate CE0036, TS EN 10204 3.1 Application Corrosive fluid (acid, base), pharmaceutical raw materials, food, plastic etc.