Chamber inspection - Import export

Optigrun Inspection Chamber TAR 250 to keep roof drainage outlets free with four connection options for TAR 80/250 or TAR 120/250.For pressure drainage and keeping drainage outlets free 4 possible connections for the drainage gutter TAR 80/250 or TAR 120/250 (preperforated openings) Chamber walls and lid with entry seals With aluminium chequered plate Walkable

Optigrun Combi Inspection Chamber TKS Plus is a control shaft for use as roof outlet inspection; includes base plate and cover. Extendable in 100 mm increments. Combinable with Triangle Water Discharge Profiles.

For storm water and foul water applications

Sewer inspection chambers of the "Zagožen" type are universal chambers, intended for a broad circle of users with the most varied of requirements. The structural solution of the chambers guarantees, along with ecological acceptability, the following: - long life (the manufacturer guarantees a 50 year life expectancy of material), - watertightness, - waste water resistance, - age resistance, - wear resistance, - simple and quick adaptation of installation height, - simple and quick construction of an additional attachment, - of various combinations of entry and exist attachments, - savings when making the reinforced concrete plate (cone), - suitable for all types of sewers, - suitable for all types of connection pipes, - height of through suits max. cross-section of attachment pipe or is equal to the - - diameter of attachment pipe, - saves time due to quick and simple installation, - simple transport, - easy manipulation (manual handling).

300mm Diameter Shallow Inspection Chambers 5no Inlet Base c/w 4no Bungs c/w 1no 400mm Riser & Circular Opening Cover & Frame

300mm Diameter Shallow Inspection Chambers 5no Inlet Base c/w 4no Bungs c/w 1no 400mm Riser & Circular Opening Cover c/w Square Frame

300mm Diameter Shallow Inspection Chambers 3no Inlet Level Base c/w 2no Bungs c/w 1no 400mm Riser & Recess Pavior Cover & Frame

300mm Diameter Shallow Inspection Chambers 3no Inlet Level Base c/w 2no Bungs c/w 1no 400mm Riser & Circular Opening Cover & Frame

300mm Diameter Shallow Inspection Chambers 3no Inlet Level Base c/w 2no Bungs c/w 1no 400mm Riser & Circular Opening Cover c/w Square Frame

300mm Diameter Shallow Inspection Chambers 5no Inlet Base c/w 4no Bungs c/w 1no 200mm Riser & Recess Pavior Cover & Frame

300mm Diameter Shallow Inspection Chambers 5no Inlet Base c/w 4no Bungs c/w 1no 200mm Riser & Circular Opening Cover & Frame

300mm Diameter Shallow Inspection Chambers 5no Inlet Base c/w 4no Bungs c/w 1no 200mm Riser & Circular Opening Cover c/w Square Frame

300mm Diameter Shallow Inspection Chambers 3no Inlet Level Base c/w 2no Bungs c/w 1no 200mm Riser & Recess Pavior Cover & Frame

300mm Diameter Shallow Inspection Chambers 3no Inlet Level Base c/w 2no Bungs c/w 1no 200mm Riser & Circular Opening Cover & Frame

300mm Diameter Shallow Inspection Chambers 3no Inlet Level Base c/w 2no Bungs c/w 1no 200mm Riser & Circular Opening Cover c/w Square Frame

300mm Diameter Inspection Chamber Cover & Frames Polypropylene Cover & Frame Square Cover & Frame c/w Universal Fitting Circular Opening Square Frame

300mm Diameter Shallow Inspection Chambers 5no Inlet Base c/w 4no Bungs c/w 1no 400mm Riser & Recess Pavior Cover & Frame

Optigrun Triangle Maxi Inspection Chamber TMK suitable for negative pressure drainage. Combinable with Triangle and TSK water discharge systems. Drainage capacity for 2 % roof pitch and profiles connected to all four sides: 24 l/s. Extendable in 50 and 100 mm increments.

Optigrun Edge Inspection Chamber RKS 80 for use on greened or gravelled roof areas above drains on edge areas directly before any ascending structural components.Especially suitable for use around edges in front of rising components Above rainage outlets for green or gravelled rooftops Can be connected to 3 strands of WLP Plus Triangle Water Conduit Inspection lid with entry seals Insulation wedge profile released from the back Walkable

Inspection chamber for use on greened or gravelled roof areas above drains in edge areas directly before any ascending structural components.Special inspection chamber for use over roof drainage outlets at the edge before ascending components, especially for outlets at the side through the fascia Chamber walls and cover with inlet slots, possible to connect 2 lengths triangle water conduit plus on three sides Chamber cover with inlet slots, compressive strength approx. 150 kg Insensitive to humid acid Reverse releasable 80 mm high

Special version of the Optigreen Triangle Maxi Inspection Cham-ber TMK with perforated intermediate floor to guide excess water from higher roof areas.For feeding and conveying excess water from rooftops located higher up to floors located lower down Conveys water through downpipes directly into a tie-in conduit with an open inlet at the top, e.g. in case of: Cascading drainage from smaller top floors, feeds roof drainage water from downpipes on façades into drainage levels of underground car parks or similar Can be connected to up to 6 WLP Plus and 3 TSK With perforated sheet metal intermediate partition Walkable

The drainage gutters are suitable for all applications in which excess water needs to be drained quickly and in a targeted manner: terraces, façades and other rising components, as well as around the eaves of pitched roofs. Gutters are particularly crucial with barrier-free designs. They are made of galvanised steel or stainless steel and are available in various lengths, heights and cross-sections.For drainage surface water from pavements, e.g. in inspection chambers above drainage outlets For draining driving rain on façades Fixed height or height-adjustable Available with many different covers Various accessories such as branch lines and end caps

Optigrun Triangle Collection Channel TSK is compatible with Optigrun Water Discharge Profiles.

Optigrun Triangle Water Conduit WLP Plus is used as water conduit system to support the discharge of excess water from drainage and substrate layers. Profiles may be interconnected by means of simple click-locks to any desired length.

As a load distribution panel for the Optigrun system solution "Public Roof with Inspection Chamber". Including Optigrün Water Retention Box WRB 95 with corresponding cut-out.

Load capacity: 15 kN test load EN 124. Material: Frame made of 2 mm cold formed precision steel profiles. Hot dip galvanised. Durbar-plate cover. Features: Sealed cover, flat design. EPDM seal. Opening tool included. Applications: For pedestrian use inside buildings and their surroundings, particularly for inspection chambers. Installation: Installation must be carried out according to our instructions. With water-tight models, care must be taken to seal the outer frame into the surrounding flooring. Installation height ≈ 6 cm Special sizes possible *S = available from stock *O = to order

Load capacity: 125 kN test load EN 124. Material: Frame and cover made of 2 mm cold-formed precision steel profiles, hot-dip galvanised. Or in grade 304 stainless steel, passivated. Stainless steel hinges. High-specification gas strut(s). Features: Comfort-lift access cover. Smell proof, largely water-tight (not guaranteed to be completely water-tight). EPDM seal. Opening tools included. Opening is assisted by the gas strut(s) to such an extent that the BV-GD/BVE-GD cover can be opened and closed by one person. Safety device fitted to prevent the open cover from closing. Applications: As a cover over installations that need to be opened frequently, without particular effort. Particularly for inspection chambers. BVE-GD is particularly recommended over plant in swimming pool areas For indoor swimming pools only use grade 316 material! Installation: Please study the enclosed installation instructions carefully before installation and pay attention to our specifications. Care...

Load capacity: 125 kN test load EN 124. Material: Frame and cover made of 2 mm cold-formed precision steel profiles, hot-dip galvanised. Or in grade 304 stainless steel, passivated. Stainless steel hinges. High-specification gas strut(s). Features: Comfort-lift access cover. Smell proof, largely water-tight (not guaranteed to be completely water-tight). EPDM seal. Opening tools included. Opening is assisted by the gas strut(s) to such an extent that the BV-GD/BVE-GD cover can be opened and closed by one person. Safety device fitted to prevent the open cover from closing. Applications: As a cover over installations that need to be opened frequently, without particular effort. Particularly for inspection chambers. BVE-GD is particularly recommended over plant in swimming pool areas For indoor swimming pools only use grade 316 material! Installation: Please study the enclosed installation instructions carefully before installation and pay attention to our specifications. Care...

Main features • Short mixing time • Extremely high mixing quality • Batches with repeatable and scalable results • Mixing ratio 1/100.000 • Coefficient of variation (CV): ≤ 3 % • Low maintenance • Functional design for installation in R&D area Techanical features • Batch size: 1,4 / 3 / 7 / 20 liters (net) • Cylindrical mixing chamber • MIxing tools: ploughshare / ploughshare with toothed design / Mix Paddle / Mix Paddle with toothed design • Material of costruction: AISI 304 / AISI 316 / AISI 316Ti • Discharge door with round profile, building the bottom side of the mixing chamber • Front side inspection door complete with safety electric lock • Electric control panel with inverter for speed variation of the main rotor shaft • Internal finishing with roughness Ra 0.5-0.8 µm