Results for
XIAMEN INNOVACERA ADVANCED MATERIALS CO., LTD
China
With its properties of electrical insulation and excellent thermal conductivity, Aluminum Nitride Ceramics is ideal for applications where heat dissipation is required. In addition, since it offers a coefficient of thermal expansion (CTE) near that of silicon, and excellent plasma resistance, it is used for semiconductor processing equipment components.
Request for a quoteXIAMEN INNOVACERA ADVANCED MATERIALS CO., LTD
China
Silicon nitride (Si3N4) is a high-melting-point material with high fracture toughness and excellent thermal shock resistance, It is considered to be one of the few monolithic ceramic materials that can withstand severe thermal shock and thermal gradient generated by hydrogen and oxygen rocket engines.
Request for a quoteXIAMEN INNOVACERA ADVANCED MATERIALS CO., LTD
China
The Aluminum oxide (Al2o3) 96% ceramic plates are widely used in thick-film circuit of electronics industry. Large scale integrated circuit,power hytrid IC,semiconductor package,pieced -film reistor, network,resistor, focusing potentiometer etc.According to the demands of customers,our company can manufacture products of special types and specifications. Alumina ceramic substrate / plate specification: > 10x10x1mm, 20x20x2mm, 40x40x8mm, 100x60x8mm, 150x150x12.5mm, 200x200x25mm etc. > The thickness of ceramic plate ranges from 0.25 to 1.0mm Can be made according to your requirements.
Request for a quoteXIAMEN INNOVACERA ADVANCED MATERIALS CO., LTD
China
The aluminum nitride (AlN) ceramic has high thermal conductivity(5-10 times as the alumina ceramic), low dielectric constant and dissipation factor, good insulation and excellent mechanical properties, non-toxic, high thermal resistance, chemical resistance ,and the linear expansion coefficient is similar with Si,which is widely used in communication components, high power led, power electronic devices and other fields.Special spec products can be produced upon requests. Product Features: 1.Uniform microstructure 2.High thermal conductivity* (70-180 Wm-1K-1), tailored via processing conditions and additives 3.High electrical resistivity 4.Thermal expansion coefficient close to that of Silicon 5.Resistance to corrosion and erosion 6.Excellent thermal shock resistance 7.Chemically stable up to 980°C in H2 and CO2 atmospheres, and in air up to 1380°C (surface oxidation occurs around 780°C; the surface layer protects the bulk up to 1380°C).
Request for a quoteXIAMEN INNOVACERA ADVANCED MATERIALS CO., LTD
China
Innovacera Ceramic Oxygen Sensor Heater is suitable for use in Bosch, Denso, Delphi, NTK & NGK Oxygen Lambda Sensor, Oxygen sensors are designed to monitor the amount of oxygen that’s in the car’s exhaust stream, while ceramic heater plays an important role in the O2 sensor.
Request for a quoteXIAMEN INNOVACERA ADVANCED MATERIALS CO., LTD
China
Typically ceramic bolt and screws are used in low-stress & high temperature conditions. These conditions are most commonly found in electronic equipment, where ceramic screws are particularly attractive due to their lack of electrical conductivity. Another benefit of ceramic screws over polymer based ones are that they have much higher and longer lasting performance due to their ability to withstand sustained heat cycling. Supply in M2x5, M3x10 and M4x10 screws with nuts, customized size is acceptable.We recommend to use the screws only together with the supplied nuts. The usage with metallic threads might not fit as the ceramic parts are manufactured in moulds and reach their final dimension after sintering. Hence they have other tolerances than metallic threads. >Thread Specification:M3-M24 >Screw cap:Hexagonal socket, flat head >Plain Ceramic Hex M3 x 10mm Set Screw >Made from alumina ceramic >Suitable replacement for plastic screws to solve embrittlement or creepage problems
Request for a quoteXIAMEN INNOVACERA ADVANCED MATERIALS CO., LTD
China
DBC ceramic substrate: Direct bonded copper (DBC) substrates are commonly used in power modules, because of their very good thermal conductivity. They are composed of a ceramic tile (commonly alumina) with a sheet of copper bonded to one or both sides by a high-temperature oxidation process (the copper and substrate are heated to a carefully controlled temperature in an atmosphere of nitrogen containing about 30 ppm of oxygen; under these conditions, a copper-oxygen eutectic forms which bonds successfully both to copper and the oxides used as substrates). The top copper layer can be preformed prior to firing or chemically etched using printed circuit board technology to form an electrical circuit, while the bottom copper layer is usually kept plain. The substrate is attached to a heat spreader by soldering the bottom copper layer to it. 1. Thickness of substrate can be thin: 0.25mm,0.28mm,0.45mm,0.5mm,0.635mm,1.0mm,1.5mm, 1.8mm,2.0mm 2.
Request for a quoteXIAMEN INNOVACERA ADVANCED MATERIALS CO., LTD
China
INNOVACERA is good at yttria stabilized zirconia. Unlike other ceramic materials, zirconia is a material with very high resistance to crack propagation. Zirconium oxide ceramics also have very high thermal expansion and are therefore often the material of choice for joining ceramic and steel. > high fracture toughness > thermal expansion similar to cast iron > extremely high bending strength and tensile strength > high resistance to wear and to corrosion > low thermal conductivity
Request for a quoteXIAMEN INNOVACERA ADVANCED MATERIALS CO., LTD
China
Alumina cearmic bar is used when conditions exclude the use of metal, either for chemical reasons or because of excessive temperatures.Their main applications are between 1000 and 1800°C. They may be in directly contact with the medium or may be used as a gas-tight inner sheath to separate the thermocouple from the actual metal protection tube. Ceramic tubes should be mounted in a hanging position above 1200°C to prevent distortion or fracture due to bending stresses. Evenhair-line cracks can lead to contamination of the thermocouple resulting in drift or failure. High purity ceramic strip provide a broad range of engineering properties: High Temperature-Superior Strength-Corrosion Resistance-Thermal & Electrical Insulation along with other specialized characteristics. -Precision Close, Tight Tolerances, -Ceramic Bar & Ceramic Strip machined to customer specifications-Prototype to Production-Intricate ceramic machining -Alumina is widely used in automotive,petro-chemical
Request for a quoteXIAMEN INNOVACERA ADVANCED MATERIALS CO., LTD
China
Ceramic reflectors supplied by us work particularly well in Ruby and Nd:YAG laser pumping chambers and can be a highly cost effective alternative to metal coated reflectors. They are also used extensively as reflectors in housings for high intensity lamps. > resists chemical attack > has high strength > has a high reflectivity over a broad wavelength band > has good thermal conductivity and > excellent dimensional and electrical stability at all operating temperatures. Specification: - - BAB192 (TCT97, BAB349) - - Material: 99% Alumina - - Specification: Φ31.00xΦ12.00x97.00 - - Application: welding, cutting, marking and in medical lasers (2) Single lamp and single rod - - Ceramic reflector TCT117 used - - Matchable YAG rods: φ(3-7)x140mm or longer - - Matchable lamps: ST256 (maximum OD is 8mm, overall length >270mm.) - - Suitable for 80W to 150W YAG lasers - - Dimension: 260x55x40mm
Request for a quoteXIAMEN INNOVACERA ADVANCED MATERIALS CO., LTD
China
Zirconia (ZrO2) Ceramics have the highest toughness and strength at room temperature of all the advanced ceramic materials. At present, it has been widely used in grinding balls, dispersion and grinding media, nozzles, ball valve seats, zirconia molds, micro fan shafts, optical fiber pins, optical fiber sleeves, drawing dies and cutting tools, wear-resistant knives, and other room-temperature resistant Grinding parts and so on. Zirconia is widely used in the fields of the thermal barrier layer, catalyst body, medical treatment, health care, textile, and so on. This dense advanced ceramics material is usually precision ground using conventional diamond cutters and wheels. Machines used for precision grinding include: * Surface grinders * CNC milling machines * Jig grinders * Centerless grinders * CNC lathes * ID grinders
Request for a quoteXIAMEN INNOVACERA ADVANCED MATERIALS CO., LTD
China
Zirconia Ceramic Screw and Bolts Ceramic screw and nuts refers to the ceramic screw is made of zirconia, alumina, silicon nitride and other materials of screw products,which has more stable physical stability and chemical stability, physical stability is mainly manifested in high and low temperature resistance, insulation, antimagnetic, wear resistance and other aspects; Chemical stability of the main surface in corrosion resistance, oxidation resistance. However, because it is a hard and brittle material, its mechanical properties can not be compared with metal materials. Of course, with the progress of material technology and the improvement of product structure,this gap is gradually narrowing. > Alumina Zirconia Ceramic Insulation Fastener Bolt And Screw > Thread Specification:M3-M24 > Screw cap:Hexagonal socket, flat headl > Plain Ceramic Hex M3 x 10mm Set Screwl M3 × 10mm > Screw cap:Hexagonal socket, flat headl > Plain Ceramic Hex M3 x 10mm Set Screwl M3 × 10mm
Request for a quoteXIAMEN INNOVACERA ADVANCED MATERIALS CO., LTD
China
Pyrolytic boron nitride is a grade of hexagonal boron nitride. It is produced by the chemical vapor deposition process to create its solid body and all the boron nitride crystals grow parallel to the surface on which the vapor is deposited.
Request for a quoteXIAMEN INNOVACERA ADVANCED MATERIALS CO., LTD
China
Innovacera manufactures custom and standard ceramic reflector designs for flash lamps, continuous-wave lasers, diode-pumped lasers, and cosmetic surgery markets. Ceramic Reflector is made by high purity porous alumina ceramic of 99% Al2O3 content, used extensively for long-life laser reflectors. This material is sintered at high temperatures to achieve a controlled porosity.
Request for a quoteXIAMEN INNOVACERA ADVANCED MATERIALS CO., LTD
China
The Aluminum oxide (Al2o396%) ceramic substrate are widely used in thick-film circuit of electronics industry. Large scale integrated circuit,power hytrid IC,semiconductor package,pieced -film reistor, network,resistor, focusing potentiometer etc.According to the demands of customers,our company can manufacture products of special types and specifications. The Maximum dimension of ceramic plate is 138x138mm and the thickness of ceramic plate ranges from 0.25 to 1.0mm. Features: 1.High reliablility and sfety; 2.High density and mechanical properties 3.High electrical and thermal loading perormances 4.Low dilelectic loss and other characteristics
Request for a quoteXIAMEN INNOVACERA ADVANCED MATERIALS CO., LTD
China
Zirconia is a very strong industrial ceramic with excellent properties in terms of hardness, fracture toughness and corrosion resistance; it solves the most common characteristic of ceramics-high brittleness. Its unique crack propagation resistance and high thermal expansion make it an excellent material for joining ceramics and metals such as steel. Due to the unique properties of zirconia, it is sometimes referred to as “ceramic steel”.
Request for a quoteXIAMEN INNOVACERA ADVANCED MATERIALS CO., LTD
China
The range of Innovcera porous ceramic filters is made from aluminum oxide and silicon carbide. The strong, uniform porous ceramic has 40-50% open porosity with a tortuous pore structure and is available in pore sizes ranging from 1 to 100 microns.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
XIAMEN INNOVACERA ADVANCED MATERIALS CO., LTD
China
Innovacera supplies precision metallized ceramic components in aluminum oxide ceramics for the military, medical, and aerospace industries. Through spray, needle, and brush coatings or screen printing our capabilities allow us to metallized on flat, cylindrical, and complex ceramic bodies. Moly-Manganese is the typical base coat materials used for metallization.
Request for a quoteXIAMEN INNOVACERA ADVANCED MATERIALS CO., LTD
China
Innovacera offers a complete line of kiln furniture, kiln components and accessories, everything from dense to low mass products to meet every application need. Our complete line of kiln components will provide a solution for every rebuild project along with applications engineering assistance for special design requirements.
Request for a quoteXIAMEN INNOVACERA ADVANCED MATERIALS CO., LTD
China
Innovacera provided advanced ceramic solutions for fluid dispensing and filling in the pharmaceutical, cosmetic and food industries.Our pumps and valves are made in advanced ceramic materials.
Request for a quoteXIAMEN INNOVACERA ADVANCED MATERIALS CO., LTD
China
Innovacera ceramic blades are designed for high performance and precisions cutting processes in various including film and foil, medical, converting or assembling of electronic components. Market leaders around the globe have chosen our solid ceramic slitting blades to improve their cutting application.
Request for a quoteXIAMEN INNOVACERA ADVANCED MATERIALS CO., LTD
China
Aluminium Oxide, Al2O3 is a major engineering material. It offers a combination of good mechanical properties and electrical properties leading to a wide range of applications. Alumina can be produced in a range of purities with additives designed to enhance properties. A wide variety of ceramic processing methods can be applied including machining or net shape forming to produce a wide variety of sizes and shapes of component. In addition it can be readily joined to metals or other ceramics using metallising and brazing techniques. Alumina based ceramics are by far the largest range of advanced ceramics made by INNOVACERA. Due to the important combination of properties, we have thoroughly researched the behaviour and characteristics of our Alumina products to give you the best possible component. Typical Alumina characteristics include: Good strength and stiffness Good hardness and wear resistance Good corrosion resistance Good thermal stability Excellent dielectric properties
Request for a quoteXIAMEN INNOVACERA ADVANCED MATERIALS CO., LTD
China
Beryllium Oxide (BeO), which is commonly referred to as Beryllia, is endowed with a virtuously unique combination of thermal, electrical, optical, and mechanical properties which may be exploited for a diverse range of applications from thermal management systems for integrated electronics to high-performance refractory components for nuclear reactors.
Request for a quoteXIAMEN INNOVACERA ADVANCED MATERIALS CO., LTD
China
Hexagonal Boron Nitride has a microstructure similar to that of Graphite. In both materials this structure, made up of layers of tiny platelets, is responsible for excellent machinability and low-friction properties. we called hexagonal boron nitride (HBN) or white graphite.
Request for a quoteXIAMEN INNOVACERA ADVANCED MATERIALS CO., LTD
China
Alumina Ceramic Heaters are produced by implementing unique metallization and ceramic lamination processes. Due to the advanced manufacturing techniques utilized in the electric element, Alumina Heaters can provide higher reliability than ever before. Currently, applications include use as innovative types of heaters in the automotive, medical and semiconductor industries.
Request for a quoteXIAMEN INNOVACERA ADVANCED MATERIALS CO., LTD
China
Alumina ceramic (Aluminum Oxide or Al2O3) is an excellent electrical insulator and one of the most widely used advanced ceramic materials. In addition, it is extremely resistant to wear and corrosion and is an industrial ceramic that can only be formed by diamond grinding. The melting point is very high at 2,072°C, and it is very hard. Alumina components can be widely used in electronics, pump components and automotive sensors.
Request for a quoteXIAMEN INNOVACERA ADVANCED MATERIALS CO., LTD
China
Alumina Ceramic Cavity Laser Reflectors Introductions : High purity porous alumina ceramic of 99% Al2O3 content, used extensively for long-life laser reflectors. This material is sintered at high temperatures to achieve a controlled porosity. Ceramic Reflector Prime Features: > Surfaces can be sealed and coated with a solarization-resistant glaze to give high bulk refectivity > 97% reflectance efficiency at 600-1000nm > Reflectance efficiency exceeds 95% across the wavelength range 400-1200nm (see curve) > Controlled porosity > Good thermal conductivity > High electrical resistivity Ceramic Cavity Laser Reflectors Physical properties: > Color: White > Bulk density (fired), Mg/m3 :3.1 > Porosity (apparent), % nominal :22 > Flexural strength (ASTM C1161, 3-point), MPa :170 > Thermal expansion coefficient 200-500C, 10-6 /C 7.9 200-1000C, 10-6 /C 9.0
Request for a quoteXIAMEN INNOVACERA ADVANCED MATERIALS CO., LTD
China
Machinable Glass Ceramic has a continuous use temperature of 800ºC and a peak temperature of 1000ºC. Its coefficient of thermal expansion readily matches most metals and sealing glasses.It processes good machinability and can be lathed, milled, planed, ground, bored, incised and threaded. It also has the advantages of insulation, pore-free, high/low-temperature resistant, acid and alkali resistant and thermal impact resistant.
Request for a quoteXIAMEN INNOVACERA ADVANCED MATERIALS CO., LTD
China
Alumina ceramic is a kind of ceramic material with a-al2o3 as the main crystal phase, because of its own high melting point, high hardness, heat resistance, corrosion resistance, and electrical insulation characteristics, it can be used in more stringent conditions. Alumina ceramics, with low price and mature production process, is one of the largest and most widely used ceramic materials, mainly used in the field of cutting tools, wear-resistant parts, and bioceramics. In addition, it is also widely used in energy, aerospace, chemical electronics, and other aspects. Especially 95% alumina and 99% aluminas, whether in structural ceramics or electronic ceramics are one of the most widely used ceramic materials. .Purity:92%,96% and 99.7% .Good mechanical strength .Excellent electrical insulation .High-frequency loss .Good thermal conductivity .Heat,wear and corrosion resistance Alumina is the best-known advanced ceramic material, is widely used in automotive,petro-chemical
Request for a quoteResults for
Ceramics- refractory - Import exportNumber of results
49 ProductsCountries
Company type