Ceramics for heater elements - Import export

Ceramic Insulated (Band) Heaters are predestined for high-temperature applications beyond 450 °C, for example for pipe heating in process heat technology, especially when gases are involved. Ceramic insulated sectional surface heating elements are also brought into action where a heat storage capacity is needed, as in hot plates the case. With the heating surface of ceramic flat heaters being composed by small-limbed ceramic elements with aligned holes in the centre for the resistance coils to be fed through, ceramic sectional heating mats are also applicable for bent or cylindric surfaces. Like Micanite insulated flat heating elements also Ceramic insulated elements can receive a metal sheath. The latter provides additional protection against mechanical load and allows for attaching connection boxes. Another advantage is the easy installation by means of mounting holes in the metal cladding.

Screw-in heaters are versatile and intended for heating liquid media in industrial and commercial applications. When selecting, the specific surface load permitted for the respective medium must be observed and checked by the customer. EHK G2 are mainly used for heating hydraulic oil in containers in which the replacement of the heating cartridge without draining the medium must be possible. Ceramic heating cartridge in stainless steel tube ø 50mm, material-no. 1.4512 or material-no. 1.4404. G2″ thread SW70 welded from V2A. Terminal box made of PA6-GF30, impact-resistant and oil-resistant, degree of protection IP66/67. Unheated zone 50mm, surface load 1,5 W/cm², voltage 230/400 V. Special versions on request.

Product Specification Application: Mainly applied to the electronic soldering iron Voltage: 110VAC Heating Resistance: 37Ω±15% Dimension: L80*φ5.0mm Electrode: Welding 2 nickel wires on the surface

Product Specification Application: Mainly applied to the electronic soldering iron Voltage: 110VAC Heating Resistance: 310Ω±10% Dimension: L60*φ3.8mm Electrode: Welding 2 nickel wires on the surface

Planar ceramic heater oxygen sensors are subject to extreme conditions. A properly functioning oxygen sensor forms the basis for reliable engine operation and thus fuel economy, low pollutant emissions, and good exhaust gas values. Oxygen sensors with planar ceramic heater characteristics: ● Quick ignition time ● Good insulation performance ● Strong resistance to high temperature and poisoning ● Long lifetime ● Pump current switch type, conventional switch type, air-fuel ration type, and wide range type are available Appliaction: Plate Ceramic Heater for Automobile / Oxygen Senser

Alumina Ceramic Heaters are produced by implementing unique metallization and ceramic lamination processes. Due to the advanced manufacturing techniques utilized in the electric element, Alumina Heaters can provide higher reliability than ever before. Currently, applications include use as innovative types of heaters in the automotive, medical and semiconductor industries.

Electric 12V 13V Alumina Ceramic Heating Element Heater Rod for Oxygen Sensor Advantages Ceramic Heater for Oxygen senster is used for heating oxygen sensors that detect the exhaust gas of vehicles and is equipped to most of automobile gasoline engines. Because the temperature can be rapidly raised, it is possible to activate the sensor immediately after the engine start which provides useful feedback to reduce emissions. 1.Based material: a.white alumina ceramic b.the content of alumina is no less than 95%. c.the tungsten slurry is printed on the ceramic tape, laminated by hot pressing, and thensintered under the protection of a hydrogen atmosphere at 1650 ° C 2.Ni-wires:N6 Ni-wires with 0.6mm diameter 3.Brazing material: siliver-copper braging alloy

Fireplaces (Ceramic-granite stoneware heaters are a unique combination of energy-efficient heating and original design. They go beyond the concept of heating devices: they have non-standard sizes, shapes, textures, and appearance, which will become a real decoration of any interior and emphasize the unique style of its owner)

Ceramic-granite heater KEN-900 "Cosmos jacquard" aquamarine (Ceramic- granite design heaters of the ART collection are a refined artistic line embodied in the author's artistic painting, which will not leave indifferent connoisseurs of inspired and sensual images)

The Herschel Aspect range of outdoor heaters use Far Infrared to gently heat people. These heaters are ideal for use where a more permanent heat is required, such as outdoor eating areas, under parasols and patios. They emit no light or noise and provide a gentle heat similar to the feeling of winter sun. Incorporating the latest high quality ceramic heating elements, all Aspect heaters come with a 5 year warranty, require no maintenance and are designed and built to last for many years.

Heating bands are the ideal solution for the heating of tubes an cylinders. Mica band heaters, frequently used as nozzle heaters, are made with a plastic-tight stainless steel casing. Such mica heating bands are in many dimension available from stock. The Ceramic heating band type is suitable specially for applications with high watt density and therefore for higher temperatures. Ceramic band heaters, also known as ceramic ring heaters or cylindrical ceramic sectional heaters, are attached to the contact surface by means of a clamping mechanism. A preferred field of use for ceramic band heaters is the heating of plasticising cylinders, bushings and nozzles of injection moulding machines and screw barrels of extrusion machines. For thermal optimization and process control ceramic band heaters can also be offered with insulation jackets or air cooling.

Planar ceramic heater oxygen sensors are subject to extreme conditions. A properly functioning oxygen sensor forms the basis for reliable engine operation and thus fuel economy, low pollutant emissions, and good exhaust gas values. Oxygen sensors with planar ceramic heater characteristics: ● Quick ignition time ● Good insulation performance ● Strong resistance to high temperature and poisoning ● Long lifetime ● Pump current switch type, conventional switch type, air-fuel ration type, and wide range type are available Appliaction: Plate Ceramic Heater for Automobile / Oxygen Sensor

Product Specification Usage: Mainly applied to model 933 electronic soldering iron Voltage: 220VAC Heating Resistance: 140Ω±10% Dimension: L60*φ3.8mm Electrode: Welding 4 nickel wires on the surface

Product Specification: Application: Used for 936 soldering station Voltage: 24VAC Heating Resistance: 3.0±0.3Ω (23℃±2℃) Dimension: L60*φ3.8mm Electrode: Welding 4 nickel wires on the surface

Ceramic Heater for Soldering iron & Station: Alumina Ceramic Heaters are produced by implementing unique metallization and ceramic lamination processes. Due to the advanced manufacturing techniques utilized in the electric element, Alumina Heaters can provide higher reliability than ever before.Currently, applications include use as innovative types of heaters in the automotive, medical and semiconductor industries. a.Based material: white alumina ceramic, and the content of alumina is no less than 95%.The tungsten slurry is printed on the ceramic tape, laminated by hot pressing, and thensintered under the protection of a hydrogen atmosphere at 1650 ° C b.Ni-wires:N6 Ni-wires with 0.6mm diameter c.Brazing material: siliver-copper braging alloy Application: We are producing High Quality 24V 110V 220V Heating Element for Soldering Station with the advantages of energy-efficient,long lifetime,high insulation,super fast heatin up and eco-friendly.

6 different power types. Compatible for factories, workshops, gyms, cafes, restaurant, chicken farms, indoor swimming pools, it can be used in all large-volume spaces such as hangars, meeting rooms and warehouses. It is remote controlled and modulated with 3 heat stages. Provide heat comfort and energy savings assists. 6 different thermal power values are produced in 2 different models, including L and U type. Using engineering, the preferred reflectors and angles allow heat to spread to the maximum area. Compatible with LPG,LNG and Natural Gas. Safe gas valve system is used in our devices

These heaters are also designed to use in outdoor and semi open cafes, restaurantss, hotel, patios and offices with 3intensity levels for economical heating purposes. 2 staged unit remote control system modulation provides you to supply heating comfort and energy investment. It has an appealing design with a cylinder shape. It can be operated by LPG, LNG and Natural Gas. It has an efficieny value that could make an intensive heat transfer. There is a safe gas valve system in all our products.

These are designed to use in outdoor and semi open cafes, restaurantss, hotel, patios and offices with 3intensity levels for economical heating purposes. 2 staged unit remote control system modulation provides you to supply heating comfort and energy investment. It transfers the heat intensively to needed spaces by the support of sheet metals around the seramic plates It can be operated by LPG, LNG and Natural Gas. It has a 72% efficieny value that could shorten payback time and supply customer satisfaction There is a safe gas valve system in all our products.

Aluminum reflectors are used for high luminous efficiency. It provides many years of trouble-free operation without the need for special maintenance programs. For your safety, there is a safety system with a buzzer against a malfunction. Usage areas: Factories, Workplaces, Warehouses, Hangars, Service Stations, Mosques, Sanctuary, Farms, Outdoor and other places. TECHNICAL FEATURES Product Code - 1st Power - 2nd Power -NG Consumption -Hanging Height**(H) ECO L5 - 6 kW - 11 kW - 1,15 m³/saat - 2,5 m ECO L10 - 11 kW - 18 kW - 1,90 m³/saat. - 3,5 m ECO L14 - 16 kW - 26 kW - 2,73 m³/saat - 4,5 m ECO L18 - 20 kW - 32,1 kW - 3,37 m³/saat - 5,0 m Natural Gas Pressure 20-55 mbar Gas Connector Diameter 1/2’’ Electric Voltage 220-240 V

Gufo HG gas fired heater is designed as an economic heating solution to be used in the winter gardens of restaurants, cafes, hotels and offices, smoking areas and terraces. Impact, moisture and wind resistant stainless steel chassis. Resistant to 1100 degrees and thermal shocks, having 98% heat conduction and aesthetic ceramic glass. With the low or high step burning system, the desired temperature comfort can be provided easily according to the temperature of the air. Built-in remote control for convenient and easy operation. Technical Features 1. Step Power 7 kW 2. Step Power 12,5 kW Heating Area 25-50 m² Natural Gas Consumption 1,3 m³/saat Recommend Hanging Height 2,2 m Natural Gas Pressure 20 - 55 mbar Gas Connector Diameter 1/2’’ Electric Voltage 220-240 V