Results for
PEEKCHINA CO., LTD.
China
PEEK Ceramic Composites Elevate your applications with our PEEK ceramic composite. This advanced material combines the exceptional properties of PEEK with the added strength and durability of ceramic. Experience enhanced mechanical performance and wear resistance, making it the perfect choice for demanding industrial solutions. Choose PEEK filled with ceramic for precision and resilience in extreme conditions.
Request for a quoteSCHMITTER HYDRAULIK GMBH
Germany
Copper sealing rings Form C according to DIN 7603 material: SF - Cu, as 0,3 mm thick sheathing and a asbestos - free filler from high temperature resistant, mineral and ceramic fiber working ... Category Sealings / Copper sealings / Copper fill rings Product number supplier 100302
Request for a quoteSCHMITTER HYDRAULIK GMBH
Germany
Copper sealing rings Form C according to DIN 7603 material: SF - Cu, as 0,3 mm thick sheathing and a asbestos - free filler from high temperature resistant, mineral and ceramic fiber working ... Category Sealings / Copper sealings / Copper fill rings Product number supplier 100302
Request for a quoteGRÜNING & LOSKE GMBH
Germany
The base material is ceramic staple fibres. Necessary for spinning the ceramic fibre is a carrier. The carrier material decomposes at 200 °C. When the material is heated up for the first time smoke development and a flaming up is noticeable. The core made from chromesteel wire Provides strength when the carrier material has decomposed. When used under stress, the carrier material determinesthe temperature limit. Available dimensions: width: 8 - 120 mm, thickness: 2 - 10 mm.
Request for a quoteGRÜNING & LOSKE GMBH
Germany
The base material is ceramic staple fibres. Necessary for spinning the ceramic fibre is a carrier. The carrier material decomposes at 200 °C. When the material is heated up for the first time smoke development and a flaming up is noticeable. The core made from chromesteel wire Provides strength when the carrier material has decomposed. When used under stress, the carrier material determinesthe temperature limit. Available dimensions: 3 - 30 mm.
Request for a quoteEC PLAZA
South Korea
The effect of carbon film + far infrared ray + near infrared ray + illite ceramics! Far-infrared rays remove impurities and dead skin cells from the skin surface, and near-infrared rays penetrate to the dermis and burn fat. By attaching a rare mineral Illite, the effect of far-infrared rays is more than doubled. 1. Made of airplane wing material, it is lightweight. 2. It is safe from fire by using carbon fiber. 3. A rare mineral ilite, produced only in Yeongdong-gun, Chungbuk, is attached. 4. Once purchased, it can be used semi-permanently. · Size : (width) 58cm / (length) 68cm / (height) 33cm · Rated Voltage : 220V 60Hz · Power Consumption: 440W · Material : external finishing(leather), reflection film, thermostat finishing, metal structure, radiant heat(pyrogen) film, carbon coating fiber, ceramic + silicone adhesive
Request for a quoteXIAMEN INNOVACERA ADVANCED MATERIALS CO., LTD
China
Laser Ceramic Nozzle Holder Information: 1.Imported ceramics + high quality special alloy 2.Ensure the consistency of thermal expansion of ceramic ring materials Prevent burst 3.The ceramic body and the alloy are closely connected, which is not deformed when heated. 4.The surface finish is high and the air flow is smoother. 5.Signal stability high sensitivity 6.The imported conductive adhesive and gold-plated copper needle have good conductivity,high sensitivity,good follow-up,effective insulation, and reduce the demage caused by impact. 7.Widely used: It is suitable for laser cutting heads of various brands Product Paramaters 1.Material: Imported Ceramic High Quality Specical Alloy 2. Thread: M5 - M14 3. Outside Diameter: 17.5 - 41mm 4. Height: 4 -34mm
Request for a quoteXIAMEN INNOVACERA ADVANCED MATERIALS CO., LTD
China
Laser Ceramic Nozzle Holder Information: 1.Imported ceramics + high quality special alloy 2.Ensure the consistency of thermal expansion of ceramic ring materials Prevent burst 3.The ceramic body and the alloy are closely connected, which is not deformed when heated. 4.The surface finish is high and the air flow is smoother. 5.Signal stability high sensitivity 6.The imported conductive adhesive and gold-plated copper needle have good conductivity,high sensitivity,good follow-up,effective insulation, and reduce the demage caused by impact. 7.Widely used: It is suitable for laser cutting heads of various brands Product Paramaters 1.Material: Imported Ceramic High Quality Specical Alloy 2. Thread: M5 - M14 3. Outside Diameter: 17.5 - 41mm 4. Height: 4 -34mm
Request for a quoteOKSUZOGULLARI HORECA VE EV GERECLERI A.S
Turkey
Design: Ergonomic, service and drip tray are integrated with the machine body. Control System: Smart Plus control panel (programming each day separately - electricity / on / off / temperature control / wate level control / maintenance period determination / working mode / real time clock / day no. Temperature Control : Digital temperature sensor Temperature Display: Digital display Water System: SWS (Smart water system - can get water from the network or from the bottle with a pump). Resistance Power: 2+2 KW (RiCA) Natural gas capacity: 5.4 KW/h Water Reservoir Drain System : Yes Water Tank Structure: Weldless plastered stainless tank Water Tank Material: Stainless 304 L DDQ 1, 2 mm Electrical Safety: 25 mA leakage current relay Component Safety: 25 A Contactor Thermal Insulation: Ceramic fiber blanket Hot water outlet tap: Yes On-Off Switch: Yes Drainer Discharge System: Yes Foot: 4cm foot Water Capacity: 30+30 lt double water tank Ignition System: Battery operated lighter
Request for a quoteOKSUZOGULLARI HORECA VE EV GERECLERI A.S
Turkey
Design: Ergonomic, service and drip tray are integrated with the machine body. Control System: Smart Plus control panel (programming each day separately - electricity / on / off / temperature control / wate level control / maintenance period determination / working mode / real time clock / day no. Temperature Control : Digital temperature sensor Temperature Display: Digital display Water System: SWS (Smart water system - can get water from the network or from the bottle with a pump). Resistance Power: 2+2 KW (RiCA) Natural gas capacity: 5.4 KW/h Water Reservoir Drain System : Yes Water Tank Structure: Weldless plastered stainless tank Water Tank Material: Stainless 304 L DDQ 1, 2 mm Electrical Safety: 25 mA leakage current relay Component Safety: 25 A Contactor Thermal Insulation: Ceramic fiber blanket Hot water outlet tap: Yes On-Off Switch: Yes Drainer Discharge System: Yes Foot: 4cm foot Water Capacity: 30+30 lt double water tank Ignition System: Battery operated lighter
Request for a quoteOKSUZOGULLARI HORECA VE EV GERECLERI A.S
Turkey
Design: Ergonomic, service and drip tray are integrated with the machine body. Control System: Smart Plus control panel (programming each day separately - electricity / on / off / temperature control / wate level control / maintenance period determination / working mode / real time clock / day no. Temperature Control : Digital temperature sensor Temperature Display: Digital display Water System: SWS (Smart water system - can get water from the network or from the bottle with a pump). Resistance Power: 3 KW (RiCA) Water Reservoir Drain System : Yes Water Tank Structure: Weldless plastered stainless tank Water Tank Material: Stainless 304 L DDQ 1, 2 mm Electrical Safety: 25 mA leakage current relay Component Safety: 25 A Contactor Thermal Insulation: Ceramic fiber blanket Hot water outlet tap: Yes On-Off Switch: Yes Drainer Discharge System: Yes Foot: 4cm Foot Water Capacity: 30 liters Maintenance Schedule Determination: Yes Clock, Real Time: Yes
Request for a quoteOKSUZOGULLARI HORECA VE EV GERECLERI A.S
Turkey
eatures Design: Ergonomic, service and drip tray are integrated with the machine body. 9 liter inner teapot is added. Control System: Smart Control Panel (Easy to use, ability to program each day separately) Temperature Control: Digital temperature sensor Temperature Display: Digital display Water System: SWS (Smart water system - can draw water from the bottled bottle with a pump from the network). Electrical Resistance Capacity: 3 KW (RiCA) Water Reservoir Drain System: Yes Water Tank Structure: Weldless plastered stainless tank Water Tank Material: Stainless 304 L DDQ 1, 2 mm Electrical Safety: 25 mA leakage current relay Component Safety: 25 A Contactor Thermal Insulation: Ceramic fiber blanket Hot Water Outlet Tap: Yes On-Off Switch: Yes Drainer Discharge System: Yes Foot: 4cm Foot Water Capacity: 30 liters Teapot Capacity: 3 teapots and 9 lt capacity inner teapot Dimensions W x D x H: 116 x 56 x 51 cm
Request for a quotePLANSEE SE
Austria
Metallic hot zones are made for very high temperatures between 1000 °C (1 832°F) and 2 800 °C (5 072 °F). As a specialist in refractory metals Plansee delivers molybdenum and tungsten hot zones with an excellent form stability and lifetime. Plansee designs and produces hot zones for various types of furnaces (vacuum, protective gas atmosphere, HIP etc) and thermal processes such as sintering, brazing or annealing. Hot zones consist of countless individual parts such as heating elements, shield packs and hearth assemblies and charge carriers. You can find all of these components at Plansee. - Hot zones made from molybdenum, tungsten, tantalum, niobium and their alloys - Full metal or hybrid hot zones with graphite or ceramic fiber insulation - From very small (a few cm³) through to very large (several m³) hot zones - For temperatures of between 1000°C (1832°F) and 2800°C (5072°F) - Tailor-made design: round, rectangular, vertical, horizontal or special geometries
Request for a quoteCRC PROGETTI SRL
Italy
OPERATING TEMPERATURE: MAX 200° C Standard power, size and shape or as indicated by the customer. PANEL TYPE: resistive inner filament* insulated with PTFE tube (Teflon) on anti-acid MOPLEN support. TUBOLAR TYPE: resistive inner filament* on CERAMIC-FIBRE support, insulated with BOROSILICATE (Pyrex) anti-acid tube.
Request for a quoteCRC PROGETTI SRL
Italy
Standard power, size and shape or as indicated by the customer. Stainless steel casing. TYPE CERAMIC FIBRE: WORKING TEMPERATURE: MAX 850°C Armour in stainless steel or ALUSI sheets Internal insulation in ceramic fibre. Resistive wire* internal insulating TYPE MICANITE: WORKING TEMPERATURE: MAX 280°C Armour in stainless steel or ALUSI sheets Internal insulation in micanite Resistive wire* internal insulating ARMOURED TYPE: WORKING TEMPERATURE: MAX 700°C Armour in stainless steel Heater*, consisting of a ARMOURED heating element with stainless steel tube. Element development up to 8.00 m. Resistive internal filament* insulated with first choice MAGNESIUM OXIDE.
Request for a quotePROPACK DICHTUNGEN UND PACKUNGEN AG
Germany
High elasticity and volume are the premises for an extremely good insulation effect Resistant against acid and caustic except phosphoric or hydrofluoric acid or highly concentrated caustics Does not content toxic substances or heavy metals Non flammable following DIN 4102 Product availability: Square, rectangular, round braid or round twisted reinforced with chrome steel wire Surface graphite impregnation on request for increasing compactness and nonstick effect Product contains approx. 20 % organic carrierfiber which decomposes at 200 °C. Technical parameters pH 1 - 13 Temperature: t = -100 … +1100 °C Main application Furnace, boiler, vessel and chimney doors Fireplaces Pressureless service closures Tunnel furnaces Boiler and vessel doors Lid seals etc. Suitable for Power plant Furnace construction Variants Square, rectangular, round braid or round twisted reinforced with chrome steel wire On request with surface graphite impregnation...
Request for a quoteRHODIUS ABRASIVES GMBH
Germany
Special technologies: High-performance ceramic grain tools. For industrial high-throughput grinding applications. Ceramic grain fibre disc – the grain enables superior stock removal performance in a short period of time with a very long lifetime. • Especially suitable for hardened and tempered steels, tinder areas and titanium • Perceivably faster stock removal • Long lifetime
Do you sell or make similar products?
Sign up to europages and have your products listed
DUALINVEST LTD.
Hungary
Formed shape products are produced either by moulding or by vacuum-forming fibres to fill a wide range of requirements not met by other product forms. These pre-formed shapes are manufactured by blending fibres, with specially selected inorganic and organic binders to give insulating shapes with exceptional characteristics. The vacuum forming manufacturing method permits considerable freedom to vary shape, thickness, density and hardness. Our shapes often provide the most economical answer to producing large quantities of parts in simple or complex configurations for a wide range of high temperature applications. We have a vast range of products already available and work closely with our customers to develop the right product for the application. New tooling can be developed within short lead-times. Shapes used in 1100 to 1800 C of heat environment.
Request for a quoteDUALINVEST LTD.
Hungary
Dualflex Blanket is made of ceramic fiber, lightweight, wool-like material. Its main components are SiO2 and Al2O3. It is made from completely inorganic materials, so even at the first heating up, no smoke is produced. Chemical Impact Insensitive (Except for Hydrogen Fluorides, Phosphoric Acids and Concentrated Alkalines). TYPICAL APPLICATIONS High temperature furnace, glass melting furnace, boiler Flexible insulation on pipes and smoke pipes Fire protection systems High temperature gaskets Removable insulating cover on machine parts
Request for a quoteCBG COMPOSITES GMBH
Germany
Heat-insulating refractory modules made of biosoluble ceramic fibres based on calcium and magnesium silicates with high thermal insulation values at operating temperatures up to 1,200°C, usable as an insulating and working layer of high-temperature equipment of any construction and type of application with the air velocity < 40 m/s. Available in two densities of 200 kg/m³ and 250 kg/m³. Easy to dispose of without harming the environment thanks to its fibre biosolubility. — 100% biosoluble — high temperature resistance* * with additional CBG special fibre coating up to 1.350°C — low thermal conductivity — good sound absorption — good insulating properties — chemically resistant to acids, alkalis, oil, hydrocarbons and water — good strength — low installation effort — reduced maintenance — environmentally friendly — harmless to one's health — contains no binders, produces no vapours or air pollution
Request for a quoteCBG COMPOSITES GMBH
Germany
Thermal insulating needle mats (blankets) made of biosoluble ceramic fibres based on calcium and magnesium silicates with high thermal insulation values at all operating temperatures, usable as an insulating and working layer of high-temperature equipment and for the production of thermal insulation products in the form of modules or panels. Available in two densities of 96 kg/m³ and 128 kg/m³. Thanks to its biosolubility, it can be easily disposed of without harming the environment. — 100% biosoluble — good tear resistance — high temperature resistance — high flexibility — low thermal conductivity — easy processing — good sound absorption — environmentally friendly — good insulating properties — harmless to health — high chemical resistance* — contains no binders, produces no vapours or air pollution * to achieve higher acid resistance, a special coating is required. Available from manufacturer.
Request for a quoteIBK WIESEHAHN GMBH
Germany
Fabric compensators are highly flexible and usually made of multi-ply fabric, offering excellent temperature resistance and chemical resistance depending on the particular design. Mainly used in pipe and conduit systems to compensate for axial, lateral and angular movements. One major advantage of this type of compensator is the low restoring forces. Special fabric materials permit temperatures of up to 1,000°C. Additional insulation can be used to resist temperatures of up to 1,600°C . Applications: Chemical plants, refineries, metallurgical industry, ventilation systems, chimney construction, industrial furnace construction, power stations, boiler systems, waste incineration plants, acoustic decoupling. Materials: Kevlar, fibre glass, glass needle felt, stone mineral wool mats, ceramic fabric, ceramic fibre mats, silicate felt mats, silicate fabric, Teflon Connection types: Continuous screws and screwed counter flange, clamping bars, tensioning belts straps
Request for a quoteDOME OVENS®
Portugal
Product key features: •All our ovens are handmade by Dome Ovens™ in Portugal. •The entire oven is handmade with pure refractory mortar resisting temperatures of 3000 F / 1648 C •Dome: Superior refractory brick: Prepared to withstand high temperatures and greater heat re-tention. •Arch: Handmade solid clay brick. •Dome: Double insulation – ceramic fiber insulation blanket 2400 F / 1315 C and proprietary mix. •Damper: Included. •Doors: Designed and made by Dome Ovens™ •Base: Break proof – solid steel / reinforced. 4 lifting hooks included ( removable ) •Gas burner ready: Prepared to receive a gas burner. Gas burner not included but available for purchase at any date. Insulated mushroom plug included for exclusive wood use.
Request for a quoteDOME OVENS®
Portugal
Product key features: •All our ovens are handmade by Dome Ovens™ in Portugal. •The entire oven is handmade with pure refractory mortar resisting temperatures of 3000 F / 1648 C •Dome: Superior refractory brick: Prepared to withstand high temperatures and greater heat re-tention. •Arch: Handmade solid clay brick. •Dome: Double insulation – ceramic fiber insulation blanket 2400 F / 1315 C and proprietary mix. •Damper: Included. •Doors: Designed and made by Dome Ovens™ •Base: Break proof – solid steel / reinforced. 4 lifting hooks included ( removable ) •Gas burner ready: Prepared to receive a gas burner. Gas burner not included but available for purchase at any date. Insulated mushroom plug included for exclusive wood use. www.domeovens.com
Request for a quoteDOME OVENS®
Portugal
Product key features: •All our ovens are handmade by Dome Ovens™ in Portugal. •The entire oven is handmade with pure refractory mortar resisting temperatures of 3000 F / 1648 C •Dome: Superior refractory brick: Prepared to withstand high temperatures and greater heat re-tention. •Arch: Handmade solid clay brick. •Dome: Double insulation – ceramic fiber insulation blanket 2400 F / 1315 C and proprietary mix. •Damper: Included. •Doors: Designed and made by Dome Ovens™ •Base: Break proof – solid steel / reinforced. 4 lifting hooks included ( removable ) •Gas burner ready: Prepared to receive a gas burner. Gas burner not included but available for purchase at any date. Insulated mushroom plug included for exclusive wood use. www.domeovens.com
Request for a quoteDOME OVENS®
Portugal
Product key features: •All our ovens are handmade by Dome Ovens™ in Portugal. •The entire oven is handmade with pure refractory mortar resisting temperatures of 3000 F / 1648 C •Dome: Superior refractory brick: Prepared to withstand high temperatures and greater heat re-tention. •Arch: Handmade solid clay brick. •Dome: Double insulation – ceramic fiber insulation blanket 2400 F / 1315 C and proprietary mix. •Damper: Included. •Doors: Designed and made by Dome Ovens™ •Base: Break proof – solid steel / reinforced. 4 lifting hooks included ( removable ) •Gas burner ready: Prepared to receive a gas burner. Gas burner not included but available for purchase at any date. Insulated mushroom plug included for exclusive wood use. www.domeovens.com
Request for a quoteDOME OVENS®
Portugal
MADE IN PORTUGAL ENGINEERED IN THE USA Product key features: •All our ovens are handmade by Dome Ovens™ in Portugal. •The entire oven is handmade with pure refractory mortar resisting temperatures of 3000 F / 1648 C •Dome: Superior refractory brick: Prepared to withstand high temperatures and greater heat re-tention. •Arch: Handmade solid clay brick. •Dome: Double insulation – ceramic fiber insulation blanket 2400 F / 1315 C and proprietary mix. •Damper: Included. •Doors: Designed and made by Dome Ovens™ •Base: Break proof – solid steel / reinforced. 4 lifting hooks included ( removable ) •Gas burner ready: Prepared to receive a gas burner. Gas burner not included but available for purchase at any date. Insulated mushroom plug included for exclusive wood use.
Request for a quoteResults for
Ceramic fibers - Import exportNumber of results
31 ProductsCountries
Category