Centrifugal fans - Import export

Radial fans or centrifugal fans are a type of fan that uses centrifugal force to create a pressure increase and a volume flow. This type consists of a fan wheel that rotates in a snail-shaped cover. The flow enters the fan through an inlet placed axially with the fan wheel shaft and motor, and is then thrown out radially with the help of the force from the fan wheel. Unlike axial fans, the motor is not in the volume flow of radial fans. To change the performance and characteristics of centrifugal fans, different designs are used on the fan wheel. The strength of the centrifugal fan is its versatility. A radial fan can be designed to transport a variety of volume flows at a wide range of pressures. At higher flows and relatively low pressures, an axial fan may be a better option. Centrifugal fans are available in single and double suction versions.

Centrifugal wall-mounted exhaust fan. For holes of ø 100 mm. By removing the rubber ring the fan becomes suitable for holes of ø 80 mm or ø 90 mm. Supplied with dowels for wall installation. Brushless engine 70% energy saving. Threefold life. Anti-static finish that provides protection from dust and dirt. On request it is possible to have 12 Volt SELV exhaust fan that can be installed in ZONE 1

For air transporting European quality

DiAm line is ideal to intake or exhaust air through circular ducting in: public locals, offices, shops, bars, pools, laboratories, kitchens, toilets, workshops, restaurants etc. its compact steel structure, external rotor motor and centrifugal backward bladed impeller ensure: • easy installation; • flexible working by adjusting the rpm; • high efficiency; • sturdiness and reliability. rANGE This line consists of 6 models with diameters from 100 up to 315mm. cONSTrUcTiON • casing in weather proof steel sheet. • Steel sheet motor supports with airflow straighteners. • External rotor motor iP44 protection iSO B, speed adjustable by electronic speed regulator. • High efficiency backward blade impeller. • Terminal box in techno-polymer. TEcHNicAlSPEciFicATiONS • conveyed air: clean. • Temperature air: -20°c/ +50°c. • Voltage and frequency: mono phase 230V-50 Hz.

USAGE AREAS -It is used in the heating industry for burning solid and liquid fuels in boilers and providing secondary air in a controlled manner. -In the ventilation of closed environments -In industrial machinery belonging to the jewelery sector -in the textile industry -In mines and mushroom farms -In plastic injection machines -In the combustion air supply of gas, diesel burners -In humid and humid environments -In the greenhouse industry -In chicken coops -Used in many areas of the manufacturing industry

- Low Pressure Radial Fan - Directly Coupled Motor. - Backward-Curved (BC) Blade Fans. - Revolvable Fan Case. - On Demand, Special Stainless Steel Manufacturing Is Available - Air Flowrate : 3.500 - 54.500 m³/h (Min. - Max.) - Pressure (Pt) : 40 - 265 mmss (Min. - Max.)

These exceptionally adaptable fans produce a outstanding and persuasive performance in every circumstance. The casing of this condensed fan is manufactured of virtually indestructible polyethylene, which substantially reduces weight making for a sturdy and highly useful fan. The TFV 30 S can be functional and stored in various positions. Its firm condensed shape makes the TFV 30 S suitable for small or difficult spaces. The TFV 30 S can be functional at different angles (0°, 45°, 90°). The turbo fans are very flexible. This perfect combination of rugged casing, high - productive motor, condensed form, adaptable working angles and excellent price makes the TFV S series suitable as modular equipment for restoration and cleaning companies, builders and trade contractors. Features and Benefits of the TFV 30 S carpet dryer: Robust polyethylene housing Double-flow turbine with extra large special axle All internal parts made of metal

Our industrial 3 kW electric heater hire will keep your operations running and your projects on track. This heater is one of the most convenient machines on the market in terms of dimensions, weight and performance. Easy to carry and transport with an optional wall mounting bracket. Integrated air distributor provides multi-directional air flow. Centrifugal fans allow high pressure outputs and better airflow. Includes an internal thermostatic control. Suitable for both indoor and outdoor commercial use. One unit maintains the same area as about three traditional heaters. Design delivers reductions in energy usage, running costs and carbon emissions. Aids the prospect of meeting long term government emission reduction targets.

Correct ventilation is not only an important prerequisite for a pleasant working environment, work protection provisions and regulatory directives make it mandatory in many areas.Proper room ventilation conducts harmful fumes and substances out of the room. The high pressure centrifugal fan TFV 100 is well-equipped for tasks such as transport of up to 4,000 m³/h air, even over longer distances and with back pressure.Owing to its extreme robustness, it is able to handle harsh working environments efficiently.The TFV 100 is available as standard model and additionally as a hire model. Benefits in practice: Extremely robust models with a high flow rate Splash proof type A (IP55) Deployment also possible in very dusty rooms Fan motor situated away from the main air flow Can be connected to suction as well as distribution ducts Stable characteristic curves and constantly high pressure

Our industrial 36 kW electric heater is capable of heating very large spaces. It provides a very quiet and convenient solution and can be placed indoors or outdoors. The heater can be easily connected to an existing ventilation system. Portable and quiet unit. The unit has three power settings and two fan speeds. Integrated air distributor provides multi-directional airflow. Centrifugal fans allow high pressure outputs and better airflow. Includes an internal thermostatic control. Can be easily connected to an existing ventilation system. Fitted with European G4 filters which will remove visible dust, wood and metal particles from the air creating a cleaner working environment. Capable of heating very large spaces, indoors or outdoors. One unit maintains the same area as about three traditional heaters. Design delivers reductions in energy usage, running costs and carbon emissions. Aids the prospect of meeting long term government emission reduction targets.

Our industrial 18 kW electric heater is quick and easy to install and operate. The unit has two fan speeds which allows for optimum performance under most site applications. Quick and easy to install and operate. Machine can be set at 4.5-9-18 kW. Fans can be regulated to operate at both half and full speed. Integrated air distributor provides multi-directional airflow. Centrifugal fans allow high pressure outputs and better airflow. Includes an internal thermostatic control. Fitted with European G4 filters which will remove visible dust, wood and metal particles from the air creating a cleaner working environment. Optimum performance under most site applications. One unit maintains the same area as about three traditional heaters. Design delivers reductions in energy usage, running costs and carbon emissions. Aids the prospect of meeting long term government emission reduction targets. Promotes a cleaner and safer working environment. Helps towards achieving BREEAM points.

Our industrial 9 kW electric heater has a powerful motor producing an efficient air flow. It features a compact chassis for easy placement within confined areas and allows the user to easily change air distribution, heat and air flow. Powerful, compact unit producing an efficient air flow. Integrated air distributor provides multi-directional airflow. Centrifugal fans allow high pressure outputs and better airflow. Includes an internal thermostatic control. Fitted with European G4 filters which will remove visible dust, wood and metal particles from the air creating a cleaner working environment. Ideal for placement within confined areas. One unit maintains the same area as about three traditional heaters. Design delivers reductions in energy usage, running costs and carbon emissions. Aids the prospect of meeting long term government emission reduction targets. Promotes a cleaner and safer working environment. Helps towards achieving BREEAM points.

High power centrifugal fans up to 4400 m3/h. Visual fill indicator. Continuous duty cycle with no maintenance requirement. Structure completely made of steel. Anti-return wheels that operate with the parking brake. Class M polyester filter. Container capacity: 160 Lt. Quick release for container opening. Filter agitation with integrated pneumatic motor (OPT). Silencer to reduce the vacuum noise level in accordance with standards. OPTIONAL Remote control. Set of pvc bags to collect chips. Cleaning set to clean the machine after work. Antistatic set. Additional deposit from 500 to 1000 Lt. Filter protection with added cyclonic pre-filter. Lifting kit to avoid the implementation of any force by the operator during the container emptying process.

High power centrifugal fans up to 4400 m3/h. Visual fill indicator. Continuous duty cycle with no maintenance requirement. Structure completely made of steel. Anti-return wheels what will they say with the parking brake. Class M polyester filter. Container capacity: 160 Lt. Quick release for opening the container. Filter agitation with integrated pneumatic motor (OPT). Silencer to reduce the vacuum noise level in accordance with standards. OPTIONAL Remote control. Set of pvc bags to collect chips. Cleaning set to clean the machine after work. Antistatic set. Additional deposit from 500 to 1000 Lt. Filter protection with added cyclonic pre-filter. Lifting kit to avoid the implementation of any force by the operator during the container emptying process.

Compact design and reduced dimensions: a range of evaporative cooling towers with centrifugal fans for special space configurations. MCT-EC version available with electronically controlled fans.

In order to introduce an appropriate pressure, a centrifugal fan is imperative. If a fan is equipped with a frequency control, the system can be optimally regulated.

Axial fans are a type of fan that creates airflow through a fan wheel that rotates around an axis and moves the air parallel to the axis. Axial fans can also be called propeller fans and are usually delivered as a complete unit consisting of fan wheel, motor and cover. Typically axial fans are direct driven with the impeller mounted on the motor shaft. There are also other designs such as e.g. belt-driven or with shaft bearing and coupling. The axial fan’s strength is to transport large volume flows at low pressures. At higher pressures, a centrifugal fan may be a better choice. To reach higher pressures with axial fans, these can be connected in series. Usually, the efficiency of an axial fan is comparatively lower than that of a centrifugal fan. But by using guide rails, diffusers and other accessories, an axial fan can reach the same or higher efficiency. The flow of axial fans can be regulated with vane or damper or speed regulation.

A fan designed for material transport is often a centrifugal fan with an impeller adapted for abrasive particles in the air flow. Fans that transport different materials in the air flow are often extra robust fans, with the right material in the cover and fan wheel. Depending on the application, the fan wheels can be equipped with knives that not only beat but also cut the transported material into smaller pieces, this type of fan is called a knife fan. By developing a fan for your particular application, we ensure that the fan can perform over time – regardless of how tough the application is. With a durable design with a stable fan curve, we know that our fans for material transport can help you with your particular application. Our many years of experience and large product range give our customers peace of mind. Development, design and manufacture of fans takes place with the highest precision and with the highest quality materials.

Fan Services Our services range from standard inspections and repairs to complete overhauls. A repair or overhaul of a fan generally consists of an Inspection, Repair/Modification and a final Report. Inspection The first step when repairing a fan is the inspection. Fan inspections include: Visual inspection Alignment check Checks of belts and couplings Measurement of axial clearances Disassembly + visual inspection of parts Dimensional measurements When the inspection is finished, an inspection report is drawn up with recommendations for repair. Execution of works After approval of the recommendations for repair, the execution of the repair / overhaul works begins. The scope of work may vary, but can include: Cleaning & steaming Sandblasting Preparation of technical drawings for machining by in-house engineering team Machining of parts (bearing housings, rotors, …) Balancing of rotating parts Coating of rotating parts Assembly Coating of exterior

Hot air fan heaters with water coil (20 to 106 kW) - ATR The hot air heaters with hot water coil are ideal for heating all types of commercial, industrial or agricultural premises where a flow of hot air is required to heat different areas of the premises to be heated. The hot water must be produced by a diesel, gas or biomass boiler. The hot water, by means of a circulation pump, passes through the interior of the heating coil of the air heater and the heat transfer is carried out by the air fan of the air heater. The fan can be axial or centrifugal, the axial type is used for direct dissolution and the centrifugal fan allows a network of ducts to be applied in addition to having a greater reach.

Types of Industrial Fans Maintenance Partners provides services on various types of fans, for example: Centrifugal Axial Fan units (fan + motor) Directly driven Indirectly driven (chain or belt) Fan Services Our services range from standard inspections and repairs to complete overhauls. A repair or overhaul of a fan generally consists of an Inspection, Repair/Modification and a final Report. Inspection The first step when repairing a fan is the inspection. Fan inspections include: Visual inspection Alignment check Checks of belts and couplings Measurement of axial clearances Disassembly + visual inspection of parts Dimensional measurements When the inspection is finished, an inspection report is drawn up with recommendations for repair. Execution of works After approval of the recommendations for repair, the execution of the repair / overhaul works begins. The scope of work may vary, but can include: Cleaning & steaming Sandblasting Preparation of technical drawings for...

The wood boiler BM is designed to offer incomparable economy in the most challenging operating conditions. It is equipped with a lambda sensor, which adjusts the air supply into the combustion chamber, in order to guarantee the ideal ratio between fuel consumption and efficiency. Furthermore, it is equipped with the fuel gas thermometer and double centrifugal fan, which minimize the heat loss from the chimney, as well as the particulate emissions into the atmosphere. Its innovative design offers the possibility of control of up to four room thermostats, adjusting the temperature in each space to the level the user desires. Moreover, the automatic functioning mode “pyrolysis cleaning” helps eliminating tar and deposits from the boiler wall, facilitating thus its cleaning.

The wood boiler BM is designed to offer incomparable economy in the most challenging operating conditions. It is equipped with a lambda sensor, which adjusts the air supply into the combustion chamber, in order to guarantee the ideal ratio between fuel consumption and efficiency. Furthermore, it is equipped with the fuel gas thermometer and double centrifugal fan, which minimize the heat loss from the chimney, as well as the particulate emissions into the atmosphere. Its innovative design offers the possibility of control of up to four room thermostats, adjusting the temperature in each space to the level the user desires. Moreover, the automatic functioning mode “pyrolysis cleaning” helps eliminating tar and deposits from the boiler wall, facilitating thus its cleaning. A typical feature of its incomparable functionality is the fact that it harmonizes its functions with the most demanding environmental conditions.

DIRECT DRIVEN CENTRIFUGAL FANS EMPLOYMENT •Single inlet centrifugal fans. •Suitable for clean air and temperatures up to 60°C on machines and process-units. •10 models with air flow up to 4.000 m3/h and stastic pressure up to 180 mm H2O (1.800 Pa). •Steel housing painted impeller with forward curved blades wire mesh guard on inlet, outlet flange. • Enclosed and ventilated motor, three phase or single phase, IP55 protection, class F. BY REQUEST •Inlet spigot. •Model LCB AT. •Construction for air temperature up to 200° C.

The thermal incinerator (TI for short) is a system which converts gas or vaporous pollutants found in exhaust gas into non-polluting compounds by way of direct combustion. This machine is characterized by: The thermal incinerator (TI for short) is a proven and robust plant for the conversion of organic pollutants (VOCs, etc.). Today it is used especially for processes which involve high exposure to condensation or dust, or for specialized solutions requiring greater heat recovery potential. An example of this would be exhaust gases containing plasticizers or siloxane. The modular design of the combustion chamber and heat exchanger especially is conducive to servicing and cleaning compared to other designs. The polluted air is forced by means of a centrifugal fan into the tube bundle heat exchanger where it circulates around the tube bundle in a cross-current fashion. The heat exchanger can be designed for an efficiency of up to 70%. The pollutants are converted in the combustion chamber at a temperature of around 760 °C. After extensive heat transfer to the raw noxious gas, the cooled clean gas leaves the plant, where it can be supplied to various heat recovery systems (or a combination of several). The auxiliary burners can be operated with natural gas or propane or light heating oil.

Air fan 800 cbm - Size – 24.5*26.5*11 - The noise level – 45 dB - Device weight 4,3 kg - Speed: 3100 per minute - Power 52 W  Manicure dust collector Х2VF extracts 100% of dust. Includes HEPA filter, reusable mask, palette. Device body is made of shockproof plastic. Manicure dust extractor has industrial centrifugal air fan. Working lifespan - 50 000 hours - it is almost 6 years of continuous working! It is highly-productive device and It will suit for all manicurist with all types of volatiles. Warranty - 24 months Free shipping for Ukraine. For your convenience speed controller is located near the on-off switch. After using our device you won't see any fleck of dust!

Air fan 800 cbm - Size – 24.5*26.5*11 - The noise level – 45 dB - Device weight 4,3 kg - Speed: 3100 per minute - Power 52 W Manicure dust collector Х2VF extracts 100% of dust. Includes HEPA filter, reusable mask, palette. Device body is made of shockproof plastic. Manicure dust extractor has industrial centrifugal air fan. Working lifespan - 50 000 hours - it is almost 6 years of continuous working! It is highly-productive device and It will suit for all manicurist with all types of volatiles. Warranty - 24 months Free shipping for Ukraine. For your convenience speed controller is located near the on-off switch. After using our device you won't see any fleck of dust!

Air fan 800 cbm - Size – 24.5*26.5*11 - The noise level – 45 dB - Device weight 4,3 kg - Speed: 3100 per minute - Power 52 W Manicure dust collector Х2VF extracts 100% of dust. Includes HEPA filter, reusable mask, palette. Device body is made of shockproof plastic. Manicure dust extractor has industrial centrifugal air fan. Working lifespan - 50 000 hours - it is almost 6 years of continuous working! It is highly-productive device and It will suit for all manicurist with all types of volatiles. Warranty - 24 months Free shipping for Ukraine. For your convenience speed controller is located near the on-off switch. After using our device you won't see any fleck of dust!