Centralised lubrication systems - Import export

Calcium Grease Multipurpose MP2 is a quality, smooth, calcium soap based grease and is fortified with the best known natural solid lubricant, graphite. Manufactured to NLGI 2 consistency, this grease gives the best combination of performance and economy for most applications. Calcium Grease is resistant to water and have excellent mechanical stability. The use of this grease will reduce wear through the use of the solid lubricant and gives extended lubricant coverage due to even distribution of the product along the wearing parts. Application : This grease is recommended for flexible couplings in various industrial applications where incidental water contact is high. Benefits : Keeps excellent shear stability under heavy duty service. Good water tolerance and is adaptable to normal grease dispensing systems including centralised lubrication systems.

Aral SuperTurboral 5W-30 is a low-friction engine oil for use in almost all commercial vehicles that do not require a so-called "low SAPS oil". It enables significantly extended oil change intervals and offers significant fuel saving potential compared to conventional multi-grade engine oils. The excellent low-temperature properties and optimal wear protection, even under severe operating conditions, offer a wide range of applications. Advantages -Extended oil change intervals and thus reduction in operating costs -Excellent soot-carrying capacity reduces abrasive wear in the engine -Best engine cleanliness thanks to low deposits and an optimized detergent system -All-year-round savings potential with quick oiling thanks to synthetic base oils with excellent flow behavior -Optimized wear protection Specifications ACEA E4, E7 MB approval 228.5

Good old technology for wellknown processes Roller Lubricators are popular despite minimizer spray solutions. GSW supports you with a preselected range of products and we help with practical advice based on our experience. On top of that, we offer a “highend” solution with our hybrid Lubricators that feature a combination of external spray and roller lubrication.

Poor greasing practices are a leading cause of bearing failure. Less than 40% of bearings will last long enough to deliver their engineered value and over or under lubrication is most often to blame. Many lube departments re-grease on a wasteful calendar-based schedule. This leads to over and under greased bearings that fail to deliver their engineered value. Grease reduces friction in bearings. Less friction means longer life. LUBExpert alerts you when friction levels increase, guides you during re-lubrication, and prevents over and under lubrication. LUBExpert is an ultrasound solution that helps you Grease Bearings Right. Use the right lubricant at the right location using the right intervals and the right quantities while receiving the right indication of a task well done including bearing status. The LUBExpert is a complete ultrasound solution to manage your acoustic lubrication program and ensure you GREASE BEARINGS RIGHT

LUBCON offers the ideal combination of premium lubricants and highly robust, automatic lubrication systems. With more than 40 years experience, we know very well which combination works best and which one doesn’t. This holistic approach helps to avoid issues and will reduce your maintenance costs and machine downtime.

We offer a wealth of knowledge in automatic lubrication solutions, with many years’ experience in designing, upgrading, installing, and maintaining auto lubrication systems across the UK. Once we have determined your needs on your needs, we can work with you to find the correct and most cost-effective system, to put in place. We can offer: Supply of automated Lubrication systems – Either in standard kit form, or via chain/oil brush application. In-house filling of grease or oil lubricants into single or multi point lubricators. Supply of disposable, refillable, and removable automatic lubricators. Already have an automatic lubrication system in place? We have a vast inventory of lubricants and greases that can be used within automatic systems.

Forvac Services are experts in Industrial Vacuum andExtraction. We can service, maintain and repair any make, brand and model of industrial vacuum and dust extraction equipment to suit your budget. Servicing and maintaining your vacuum equipment, extends its working life, ensures optimum running efficiency and minimises the risk of a breakdown or mechanical failure. The environments and harsh conditions that Vacuums and extraction systems are subject to, such as damp conditions, low temperatures, high temperatures, long running hours or long periods of non-use, can all effect how the equipment runs. With Forvac performing regular tests & checks, removing and replacing consumable parts, changing vacuum seals, filters and fluids, we can ensure your vacuum equipment is in top shape for when you need it most. Forvac’s engineers are experienced in servicing all makes and models of industrial vacuums and LEV’s regardless of size, age or condition.

The Pulsarlube OL500 oil lubricator consists of the main body with a vertical self-priming pump controlled by the microprocessor, a 500ml oil reservoir, and a battery pack. This product has the ability to precisely deliver very small amounts of lubricant with selectable intermittent dispensing cycle. An economical solution compared to messy manual lubrication or a high cost, fully automated lube system. A complete oil lubrication system with optional accessories and remote installation kits. Easy to check the operating status. Easily adjustable oil volume by the mode setting. Easy to refill and spill-proof oil reservoir. Compatible oil reservoir with most synthetic oils and chemicals.

The Pulsarlube PLC electromechanical automatic grease lubricator is specially designed to be fully integrated as well as be synchronized to a PLC system .Kindly offers two types of PLC lubricator, Month and Interval type for wider range of usage. Can remotely send a dispensing signal to the lubricator when lubrication is needed Precise lubrication on demand Can lubricate up to 8 lube points (Max. 6m) High output pressure of 30~60kgf/cm² (425~850psi) User can control dispensing rate based on hours of operation of equipment(INTERVAL TYPE)

Pulsarlube Mi automatic grease lubricator is innovatively designed to detect the operation of industrial rotational machinery by using a piezoelectric vibration sensor. This piezoelectric sensor is composed of a ceramic strain transducer attached to a metallic proof mass in order to respond to an externally imposed acceleration. Fully automated lube system Clear reservoir that is easy to see the remaining grease inside No need for external electric wiring to a motor or other power supplies Possible to choose proper high performance lubricants according to specific environments Reliable constant, precise & predictable lubricant supply Low maintenance cost, competitive with manual lubrication

The Pulsarlube M500, newly developed automatic grease lubricator, is primarily designed to ensure reliable lubrication of larger bearings (i.e. >102mm (4") O.D) commonly found in industries such as mining, cement, and steel. Large 500ml grease capacity with long operation period up to 24 months. Wide operating temperature range with optional Lithium battery pack. 'Automatic Lockout system' preventing any possible accidental/unauthorized re-programming of the unit after it has been set. Easy to replace grease and battery pack. 8 variable dispensing periods from Half to 24 months in a single unit. High output pressure (average 30kg/cm²/(425 psi) enables multi point lubrication up to 8 points and/or remote installation up to 6 meters (20 ft) per point .

The Pulsarlube MSP electromechanical automatic grease lubricator is designed to operate in synchronization with the equipment on which it is installed. As long as the equipment is operating, the Pulsarlube MSP will dispense the preset amount of lubricant so that any loss or waste of lubricant can be prevented. Ideally suited for applications where lubrication is to take place only when the machine is in operation and where a feedback signal to PLC is required Any over-lubrication issue can be prevented No needs to change the internal battery pack for up to 5 years (externally powered) Cost effecitve by use of replaceable grease pouch only Selectable grease pouch : 60, 125, 250, 500ml Available dispensing periods: 60ml : 1~12 months 125,250ml : 1,2,3,6,12 and H month 500ml : 1,2,4,6,12,18,24 and H month

The Pulsarlube MS electromechanical automatic grease lubricator is designed to operate in synchronization with the equipment on which it is installed. As long as the equipment is operating, the Pulsarlube MS will dispense the preset amount of lubricant so that any loss or waste of lubricant can be prevented. The Pulsarlube MS electromechanical automatic grease lubricator is designed to operate in synchronization with the equipment on which it is installed. As long as the equipment is operating, the Pulsarlube MS will dispense the preset amount of lubricant so that any loss or waste of lubricant can be prevented. If the equipment is not operating, then the Pulsarlube MS goes into "stand-by mode" and does not dispense lubricant until the machine goes back into operation.

The Pulsarlube EX electromechanical automatic grease lubricator is UL, ATEX certified. It is primarily designed to meet the following requirements: UL79, Power-Operated pumps for Petroleum dispensing products, 8th Edition ANSI/ISA-12.12.01-2000, Nonincendive electrical equipment for use in Class I , Division 2 , Groups C and D Hazardous locations. Applicable to electric motors as well as other types of equipment subject to hazardous location classification. Tested by Underwriter Laboratories and meets the following requirements: UL79, Power-Operated pumps for Petroleum dispensing products. Certification: Class I, Div. 2, Groups C and D. Where flammable gasses or vapors are present in the air in quantities sufficient to produce explosive or ignitable mixtures. Cost effective by use of replaceable grease pouch and battery pack (Service pack). Selectable grease pouch: 125, 250ml. Available dispensing periods: 1, 2, 3, 6, 12 and Half (H) months.

The Pulsarlube V automatic grease lubricator operates based on the proven technology of electrochemical reaction which generates inert Nitrogen (N2) gas through the systematic use of an electrolyte and electrical energy. Cost effective by reduced inventory Easy to install and simple to operate using one-touch switch Microprocessor controlled accurate dispensing rate Large user friendly LCD Available dispensing periods: 1, 2, 3, 6, 12 months and Purge (P) Immediate grease dispensing available for testing and installation by using Purge (P) mode Transparent container for easy visual inspection of lubricant levels

The Pulsarlube E is designed to offer superior advantages in cost competitiveness and user friendliness over conventional gas type SPL units. The Pulsarlube E has a creative and innovative design which satisfies a wide variety of demands for industrial applications. It operates based on the proven technology of electrochemical reaction which generates inert Nitrogen (N2) gas through the systematic use of an electrolyte and electrical energy. Highly cost effective Easy to install and simple to operate Five available dispensing periods: 1, 3, 6, 9, and 12 months Convenient for use in confined spaces Durable and reliable engineering Transparent container for easy visual inspection of lubricant levels Resilient 1/4" NPT/BSPT compatible output thread