Central bodies - Import export

Drived by integrated pneumatic cylinder Guided by 2 rods on ball bushings Adjustable mechanical stops Hydraulic shock absorbers Inductive sensors Flow limitation Compact and robust manipulator With a compact and very robust design, they are suitable for shortstroke movement where rigidity is necessary. They are often used in vertical or lifting modules in the design of pneumatic handling assemblies. For longer strokes, use the Type 37 manipulators. Several mounting directions possible Equipped with the same end plates and without exceeding of the cylinder at the end of the stroke, these compact manipulators can be fixed by the 2 end plates to have the movable central body, but they can also be fixed by the body, the rod cylinder can then be oriented up or down. Optimized end of stroke adjustments The fine adjustment of the stroke is done by mechanical stops without any intervention on the hydraulic dampers and the inductive detectors this saves time

The Galleon Race ride consist of a circular development track with depressions and two “cat’s back”. The rail is supported by a steel horse structure, connected to the central body by radial longeron and tie rods. The whole metal structure is hot-dip galvanised. Twelve cars run along the rail, connected to a central rotor by radial arms (sweeps). The foot-boards approaching the cars consists of an aluminium tread plate. All electric and pneumatic equipment is fitted inside the central body, on which the central rotor is fixed. The ride moves by means of 1 self-braking A.C. gear-motor fixed to the central rotor and controlled by Frequency Drive.

The Matterhorn ride consist of a circular development track with depressions and two “cat’s back”. The rail is supported by a steel horse structure, connected to the central body by radial longeron and tie rods. The whole metal structure is hot-dip galvanised. Twenty cars run along the rail, connected to a central rotor by radial arms (sweeps). The cars swings due to centrifugal force during rotation of the ride. The foot-boards approaching the cars consists of an aluminium tread plate. All electric and pneumatic equipment is fitted inside the central body, on which the central rotor is fixed Electronically operated lighting is composed of cabochons. The covering canvas is made of fireproof material (class 2) and panelling of the cars are fibreglass made. The ride moves by means of one self-braking A.C. gear-motors fixed to the central rotor and controlled by Frequency Drive.

The Musik-Express ride consists of a circular development track with depressions and three cat backs. The rail is supported by a steel horse structure, connected to the central body by radial longeron and tie rods. The whole metal structure is hot-dip galvanised. Twenty cars run along the rail and are connected to a central rotor by radial sweeps. The foot-boards approaching the cars consists of an aluminium tread plate. All electric and pneumatic equipment is fitted inside the central body, on which the central rotor is fixed. All decorative panels are coated with aluminium sheet. Electronically operated lighting is composed of cabochons. The covering canvas is made of fireproof material (class 2) and panelling of the cars are fibreglass made. The cars are moved by 5 self-braking AC motors fixed on the ends of the radial sweeps and controlled by Frequency Drive.

The Musik-Express ride consists of a circular development track with depressions and three cat backs. The rail is supported by a steel horse structure, connected to the central body by radial longeron and tie rods. The whole metal structure is hot-dip galvanised. Twelve cars run along the rail and are connected to a central rotor by radial sweeps. The foot-boards approaching the cars consists of an aluminium tread plate. All electric and pneumatic equipment is fitted inside the central body, on which the central rotor is fixed. All decorative panels are coated with aluminium sheet. Electronically operated lighting is composed of cabochons. The covering canvas is made of fireproof material (class 2) and panelling of the cars are fibreglass made. The cars are moved by 3 self-braking AC motors fixed on the ends of the radial sweeps and controlled by Frequency Drive.

The Waltzer consists of a circular undulatory track. The rail is supported by a steel horse structure, connected to the central body through long bars and radial tie rods. The whole metal structure is hot-dip galvanized. The floor consists of an aluminum plates and has 7 independent gondolas which rotate on themselves using the undulating rotation of the entire floor during the ride. All the gondolas are equipped with a pneumatic brake to allow to the passengers a safe ascent and descent. All the electric and pneumatic equipment are assembled inside the center of the ride, where is attached the central rotor. The center of the ride consists of a square structure to be bolted to the foundation. The body of the cars are made of fiberglass. The ride moves by means of 7 A.C. self-braking gearmotors, controlled by a Frequency Drive.

Children's water fountain for school playgrounds FP-02, generic characteristics: Double pool fountain, in AISI 304 stainless steel. Normalized timed faucets with soft pressing so that the smallest children can operate them (they can press them with a force of less than 20 Newtons). Drinking fountains adapted for preschool children. AISI 304 stainless steel plates and screws. Fonts customizable in height and color. You can customize your double fountain for schoolyards, without increasing its price, even if it is just one unit, with the following elements: Height to lower pool (we recommend 67cms for children from 3 to 6 years old, and 55cms for children from 0 to 3). With or without decoration on the central body in stainless steel. Central body and arm thermo-lacquered in the oven to choose Parcheesi colors, or whatever the client chooses from our extensive range of tones.

Distribution Manifold in Brass & Distribution Manifold For Central Heating System ** / Body : Brass (CW617N) / Connection : Threaded ( Inner ) / Max. Working Temp. : 120 ºC / Max. Working Pressure : 16 Bar / Size : 1'' *** Application Areas : Hot and Cold Water Systems

Included in this range- Large bore 3 & 4 Jaw Self Centring Chucks- Ø500-1800mm steel body cast iron available Ø500-630mm centring tolerances according to UNE 15-430-94/ISO 3089:1991 norm 4 jaw independent chucks with one piece jaws- Ø500-1500mm cast iron or steel body solid reversible jaws direct mounting 4 jaw independent chucks with two piece jaws- Ø500-1500mm cast iron or steel body two piece jaws according to ASA norms jaws direct mounting heavy duty 4 jaw independent chucks- Ø600-2000mm heavy duty steel body two piece jaws according to ASA norms jaws long master jaws for added rigidity direct mounting 3 and 4 jaw self centring VTL chucks- Ø700-1800mm specially designed for vertical lathes steel body central cover and long base jaws covering the spindle nose of the lathe induction hardening of all gliding areas 3 jaw oil country self centring chucks- Ø500-1000mm forged steel body extra heavy duty American Standard, hard top and master jaws

Nipples conventionally mean fittings with external threading on both extremities of the body, the central part of which has a hexagonal profil. We have manufactured many brass nipples for various sizes, such as: 3/4"1/2".

Suitable for handling shapes weighing up to 100 kg, in any place and environment. 21/02/2024, 18:12 Bartoli | Attrezzature per la produzione del formaggio https://www.caseartecnicabartoli.it/en/attrezzaturaproduzioneformaggio 5/6 They are equipped with a resistant stainless steel structure that makes them highly stable and an ergonomic shape that allows them to be moved anywhere, without any effort. They are supplied with battery and charger. Main features: Particularly solid structure, entirely in stainless steel. Electric devices for starting and stopping, controlled by software, located in the central body. Dc engine. Dry-type battery without maintenance. Battery charger with automatic removal when fully charged. Up / down control push-button panel. Battery charge display. Ergonomic handle. Loading surface in hard, non-deformable plastic. Small size. Handy and easy to manage. Pivoting rubber wheels. The rear wheels are equipped with a parking brake.