Results for
EAB ASSOCIATES
United Kingdom
EABASSOC Foaming Agent is a concentrated foaming agent with low dosage rate of 0. 3 - 1.0 litre per m3 of foamed concrete, depending upon the density of the foamed concrete and mineral content of water used to dilute the foaming agent. An EABASSOC Foam Generator (or similar) is required to produce the foam. Foamed concrete, also known as cellular lightweight concrete (CLC) can be made with a density of 400 - 1600 kg/3 and compressive strength of 1 - 15 MPa. Foamed concrete can be used for many applications, such as: * pre-cast blocks and panels * in-situ panels * roof insulation * floor screeds and raising floor levels * planned and emergency void filling * road sub-bases * bridge repair, strengthening and abutments * trench reinstatement * soil stabilisation * land reclamation For more information please contact us.
Request for a quoteEAB ASSOCIATES
United Kingdom
The EABASSOC Foam Generator creates foam from EABASSOC Foaming Agent (or similar), water and compressed air. The foam can then be used for making foamed concrete (also known as cellular lightweight concrete, CLC or aircrete). Specifications: *Throughput of foam 460 litres per minute *Accurate Foaming Agent dosing *Total Repeatability *Adjustable Injection Rate *Mobile (fits in car boot) *Compact - measures only 610 x 450 x 280 mm *Light enough to be easily carried - 24 kg *Requires only an air supply to work, no electrical supply needed *On/Off Timer Switch *Lance for discharging foam into ready mix truck mixer
Request for a quoteARTRA LIGHTWEIGHT CONCRETE TECHNOLOGIES
Turkey
Capacity: 100 LT/ minu. Dimensions: 110X70X80 (u.g.y) Weight Total: 70 kg Tank Capacity: 50 lt System: Air compressor foam nozzle and chassis Total power: 2 KW Energi: 220 W Control: Manuel
Request for a quoteSEMIN
France
TECHNICAL DETAILS Powder filler for all types of interior filling work on uneven substrates (rough precast concrete, for instance). COMPOSITION AND APPEARANCE Plaster-based powder coating containing calcium carbonate, resin and various additives. The mixed paste is white in colour. SUITABLE SURFACES Interior walls and ceilings: Bubble concrete, bare concrete, cellular concrete, irregular plaster, heating ceiling, uneven surfaces, etc. OVERLAYING After the filler has dried completely, suitable for covering with all types of plaster-based coatings, thick coatings, wall paper or wall coverings. TECHNICAL CHARACTERISTICS • Granulometry : Up to 0.2 mm • Adhesion : complies with NFT 30 608 • pH : neutral PACK SIZE 5 and 25 kg bags on shrink-wrapped pallet. STORAGE 9 months in unopened original packaging stored away from moisture. PREPARATION OF SURFACES Surfaces must comply with DTU 59.1, i.e. be clean, dry, dust-free and free from all traces of form oil.
Request for a quoteSEMIN
France
TECHNICAL DEFINITION Ready-to-use surface filler paste for filling interior holes and cracks. COMPOSITION AND APPEARANCE Water, calcium carbonate, sand, resin and various additives. SUITABLE SUBSTRATES All types of interior substrates : concrete, cellular concrete, cement, breeze block, brick, plasterboard, plaster tiles, plaster, old paint. COVERING Primer coat, smooth surface filler, wall coverings, paint REFERENCE DOCUMENTS • Filler meets EN 16566 standard • DTU 59.1 : Paint work TECHNICAL CHARACTERISTICS • Density : 1.5 • Dry extract : 82 % STORAGE 9 months in original unopened packaging away from frost and high temperatures. PREPARATION OF SUBSTRATES Substrates must comply with the DTU 59.1 standard i.e. be dry, clean, dust-free, hard and free of any trace of separating agent. APPLICATION Applied by hand using a filling knife or spatula. The thickness is 2 cm; to fill deeper holes, build up the filler in several steps The maximum thickness will be 1 cm per coat.
Request for a quoteSEMIN
France
TECHNICAL DEFINITION White, matt, ready-to-use thin finishing plaster to level interior substrates. Ideal plaster for renovating uneven or textured substrates. COMPOSITION AND APPEARANCE Water, calcium carbonate, resin and various additives. SUITABLE SUBSTRATES All types of interior substrates: concrete, cellular concrete, cement, breeze, brick, plasterboard, plaster tiles, plaster, old paint, glass canvas, old droplets, glass fibre cloth, old droplets. TECHNICAL PROPERTIES • Density : 1.3 • Dry extract : 66% • Fire classification : A2s1d0 STORAGE 18 months in original unopened packaging away from frost and high temperatures. APPLICATION Manual application : with a trowel or filling knife. Mechanical application : airless spray, spraying machine. In cold weather, mix the product quickly to aid aspiration. We recommend removing the filter from the pump, spraying at about 60 cm from the substrate.
Request for a quoteSEMIN
France
TECHNICAL DEFINITION FIBRELASTIC is a ready-to-use filler paste with a high proportion of resin and glass fibre. Particularly suitable for all types of interior and exterior filling jobs. It has permanent flexibility allowing it to tolerate flexing of the substrate without cracking and it eliminates the need for repair tape. COMPOSITION AND APPEARANCE Emulsion resin, calcium carbonate, fibreglass and various additives. The paste is off-white. ACCEPTED SUBSTRATES • Plaster • Masonry • Cellular concrete • Wood • Cement render • Plasterboard • Roughcast • Old painted surfaces • Concrete • Silico-limestone brick SUITABLE SURFACES Once it has dried entirely FIBRELASTIC can be covered with any type of paint or plaster base or ready-to-use fillers. TECHNICAL CHARACTERISTICS • Viscosity (BV 1000 / 30 rpm) : 300000 mPas • Density : 1.3 • pH : 6 • Permanent elasticity PACK SIZE Tubes containing 300 g. Tubs containing 1.5 and 5 kg.
Request for a quoteSEMIN
France
TECHNICAL DETAILS Powder filler for all types of interior filling work on uneven substrates. SEMIN HIGH BUILD FILLER has very good filling properties. SUITABLE SURFACES All types of interior surfaces: bubbled concrete, untreated concrete, cellular concrete, irregular plaster, heating ceiling, terracotta tiles, uneven substrates... Covering After the filler has dried completely, suitable for covering with all types of plaster-based coatings, thick coatings, wall paper paste, wall coverings. REFERENCE DOCUMENTS • Filler complies with standard NFT 30 608 • DTU 59.1 : painting work • Technical notice CSTB N°9/99-681 TECHNICAL CHARACTERISTICS • Granulometry : up to 0.5 mm • Adhesion : complies with NFT 30 608 • pH : neutral • Usage time for batch : 24 hours PACK SIZE 25 kg bags on shrink-wrapped pallet. APPLICATION May be applied manually with a smoothing trowel or coating blade, or mechanically by spraying then manual smoothing. THICKNESS OF APPLICATION Up to 5 mm in one pass.
Request for a quoteSEMIN
France
DESCRIPTION Coating to quickly fill all sizes of cracks, holes and grooves with no shrinkage and no cracking. COMPOSITION AND APPEARANCE Plaster-based powder filler, calcium carbonate, mineral reducer, cellulose derivatives and various admixtures. The compound obtained is white in colour. SUITABLE SURFACES All types of internal unfinished or painted surfaces : plaster, plasterboard, plaster blocks, concrete, cement coating, breeze blocks, cellular concrete, bricks, terracotta... TECHNICAL CHARACTERISTICS • pH: neutral • Setting time : 30 minutes depending on the ambient conditions and the thickness applied PACKAGING 5 kg and 15 kg bags. APPLICATION To be applied using a coating knife. Amount required : 1 kg m²/mm thickness. DRYING TIME Depends on the ambient conditions, the nature of the surface and the thickness of application. Generally speaking, when spread to a thickness of one cm, the filler dries in 6 hours.
Request for a quoteSEMIN
France
COMPOSITION AND APPEARANCE Plaster-based powder filler, special cements, calcium carbonate, resin, cellulose fibre and various admixtures. The compound obtained is white in colour. TECHNICAL CHARACTERISTICS • Setting time : 30 to 40 minutes • Hardening time : 1 to 2 hours. • Second coating : after 3 hours • Adherence : complies with NFT 30 608 SUITABLE SURFACES All types of interior surfaces complies with DTU 59.1 : plaster, plasterboard, plaster blocks, concrete, cement coating, breeze blocks, cellular concrete, bricks, ceramic, old paintwork, old painted fibreglass, floor tiles, wall tiles, etc. COVERINGS After the filler has completely dried, it can be covered using all types of paints, plaster-based coatings, paste coatings, wallpaper paste. PREPARATION OF SURFACES Surfaces must comply with standard DTU 59.1 and be clean, dry and free from dust and any trace of separating agent. Correctly open up, bevel and dust off the cracks.
Request for a quoteSEMIN
France
TECHNICAL DEFINITION Ultra-light ready mixed filler for repair of interior or exterior walls and ceilings. Shrink free and fast drying, SEM-LIGHT is ideal for high quality filling jobs and is very ease to use. COMPOSITION AND APPEARANCE Resins in emulsion with lightening agents and various additives. The paste is snow white. ACCEPTED SUBSTRATES Interior and exterior walls and ceilings • Plaster • Masonry • Cellular concrete • Concrete • Plasterboard • Roughcast • Wood • Cement render TECHNICAL CHARACTERISTICS • Density : 0.4 • pH : 7 • Shrink-free filling • Excellent application qualities STORAGE 12 months in unopened original packing protected from frost and extreme heat. PREPARATION OF SURFACES BEFORE APPLICATION The substrates must be clean, free of dust and any trace of formwork release oil. Indoors, during hot weather or on absorbent substrates the surfaces may be dampened slightly. Cracks should be opened up before application.
Request for a quoteTOX-DÜBEL-TECHNIK GMBH
Germany
Features • Ideal for cellular concrete P2: just hammer in and tighten – quick and easy • Holds in almost all building materials • Metal tip enables high holding values • Directly usable due to preassembled screw Description & Area of Application • 3-way split spreader element with metal tip • Shaft with rotation locks • Wall plug is completely pre-assembled with galvanized countersunk screw with TX drive
Request for a quoteTOX-DÜBEL-TECHNIK GMBH
Germany
Features • Ideal for perforated brick (Poroton) and cellular concrete (Ytong) • Extremely high holding values • Spreads in several directions • Rotors prevent rotation in the drill hole • 100% nylon • Long expansion range for secure anchoring • Also suitable for metric threaded rods Description & Area of Application • Multiple expansion by 2-way separated expansion elements which are offset by 90° with moving rotors and flexible wall plug neck • Large anchoring depth
Request for a quoteTYROLIT - SCHLEIFMITTELWERKE SWAROVSKI AG & CO K.G
Austria
Tyrolit table saw blades excel in professional machining of various materials, including tiles, fine stoneware, ceramics, hard stone, marble, exposed aggregate concrete, concrete blocks, and cellular concrete. We even offer a specially developed blade for cutting refractories. Tyrolit combines table saw blades and machines to create system solutions that ensure top results for all cutting operations. This variety and quality make us a valued partner in the construction industry and among professionals who demand precise results. Our table saw blades come in various designs, with SILENT options reducing noise by up to 10 dB, benefiting operator health and motivation. Tyrolit ensures perfect quality and service, offering fast delivery and all relevant blade diameters. High-quality sharpening plates are available for dry-cutting blades.
Request for a quoteMALVIN SRL
Italy
Lightened premixed plasters based on natural lime and special hydraulic binders and light mineral aggregates, fiber-reinforced with a special polypropylene fiber composition specially designed for internal background plasters on autoclaved cellular concrete blocks (Ytong and Gasbeton type) with mechanical application and manual. Approved by the Ytong laboratories. PACKAGE: Loose in silo - 25 kg sacks - 60 bags sacks - 15.00 ql USE: Indoor COLOUR: Grey GRANULOMETRY: ≤ 1.3 mm SURRENDER: 10/11 kg / m² per cm of thickness CAPILLARY WATER ABSORPTION EN 1015-18: "W0" class RESISTANCE COEFFICIENT TO STEAM PASSAGE EN 1015-19: μ ≥ 8 THERMAL CONDUCTIVITY EN 1745: λ 10, dry, mat = 0.29 W / mK FIRE RESISTANCE ACCORDING TO DM 02/16/2007: REI 120 APPROVED BY YTONG LABORATORIES: Test Report PB-VK-170-01
Request for a quoteMALVIN SRL
Italy
Cementing clout with high penetrating and insulating resin based on resinous latex in aqueous dispersion for external and internal, particularly suitable for the consolidation of insubstantial surfaces, To improve the adhesion of background plasters or mineral coatings or other mortars on new or old walls, on smooth or poorly absorbent surfaces, not uniform in absorption, concretes, weak, inconsistent or flour supports, on supports Base Chalk and Anhydrorene, on autoclavable cellular concrete blocks. Suitable for the consolidation of cementitious screets of low consistency. Packaging: Tanica 5-20 LT Color: Colourless Usage: Indoor/outdoor Dilution: 1:2 with clean water on concrete supports and on supports generally non-absorbent and/or particularly smooth and/or difficult to adhere • 1:4/1:5 with clean water on supports generally absorbent or on average Absorbent Yield: 8/12 sqm for LT, depending on the absorption of the support
Request for a quoteMALVIN SRL
Italy
Premixed, high elasticity, anti-carbonate, thixotropic, water-repellent, fibro-reinforced, shrinkage compensated to EN 1504-2 and EN 998-1 based on special hydraulic binders, suitable for universal use on any compatible substrate. For the external and internal smoothing of concrete surfaces, of rustic, plastic and / or mineral coatings, of traditional or premixed plasters based on lime and cement, both new and old, even if painted, provided they are in excellent condition, of plasters that present shrinkage lesions, concrete block walls, autoclaved cellular concrete, coatings in polystyrene panels, polystyrene (also embossed), polyurethane, cork, cement wood. To uniform plastered surfaces with different mortars. As a bonding base for coatings in polystyrene panels, polystyrene (also embossed), polyurethane, cork, cement wood. Used as a shave on coatings, it can be used as a decoration for MEHLVIT ELS / PLUS or AGROPOLI ELS / PLUS elastomeric water-based paint.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
ARTRA LIGHTWEIGHT CONCRETE TECHNOLOGIES
Turkey
Lightweight Concrete Building Elements ARTRA® CLC Wall Panels Cellular Lightweight Concrete Wall System Cellular Lightweight Concrete is one of the construction materials. less weight has than normal conventional concrete. It can speed up the construction time, easy to install, and is durable. It also has good thermal insulation property, good sound absorption, good fire resistance, and considered as environment-friendly sustainable material produced with the least energy demand. This wall system used for both indoor and outdoor. The surface has been smooth and patching requires only at joint areas. Cellular Lightweight Concrete Wall system consists of the following main parts components; Cement, sand, water and organic foam agent. For example, the CLC Panel size is 250 x 600 x 2700 mm. Weight 64kg / panel The size of the galvanized steel frame is 0.50 x 50 x 35 mm.
Request for a quoteARTRA LIGHTWEIGHT CONCRETE TECHNOLOGIES
Turkey
GENFİL (Foam Agent) It is a high efficient, organic resin-based foam agent developed for the production of lightweight concrete and lightweight structural elements in the construction sector. The foam material is composed of antibacterial, enzyme-based, active proteins. It is organic, does not harm nature, is not harmful to human health.
Request for a quoteResults for
Cellular concrete - Import exportNumber of results
20 ProductsCompany type
Category