Carbide coating - Import export

Tyrolit’s tungsten carbide burrs can machine materials like steel, stainless steel, non-ferrous metals, cast iron, and HSS. They come in various shapes and profiles, including tapered, cylindrical, ball-shaped, and special designs for angles, corners, and flutes. The parts are soldered with a copper alloy for impact resistance, enhancing safety and performance. Our burrs ensure first-class grinding with maximum economy, featuring long tool life due to a specially developed cutting edge geometry. The aggressive cutter profile allows for significant material removal in a short time, with reduced heat generation to protect both tool and workpiece, crucial for stainless steel to prevent discoloration. The new HPC-coated tungsten carbide burrs for cast iron, steel, and stainless steel offer higher performance, longer life, and better results. The advanced coating improves chip transport and doubles stock removal, with a distinctive Tyrolit color combination.

The XK-Z66 Tungsten Carbide blade with Tin coating is an - oscillating - pointed - serrated - blade that cuts - foam - insulating mat - corrugated cardboard - available in 10 blades per pack.

The XK-R121 is a 3 hole double edge - tungsten carbide - tin coated - razor for slitting - converting - film - foils - polyetheleen - polypropolene - technical fibers - textile in a pack of 20.

The XK-R111 is a 3 hole double edge - tungsten carbide - tin coated - razor for slitting - converting - film - foils - polyetheleen - polypropolene - technical fibers - textile in a pack of 20.

The XK-R151 is a 3 hole double edge - tungsten carbide - tin coated - razor for slitting - converting - film - foils - polyetheleen - polypropolene - technical fibers - textile

The XK-S341 is a slotted - carpet blade - tungsten carbide - tin coated - razor for slitting - converting - film - foils - polyetheleen - polypropolene - technical fibers - textile in a pack of 20.

The XK-R131 is a 3 hole double edge - tungsten carbide - tin coated - razor for slitting - converting - film - foils - polyetheleen - polypropolene - technical fibers - textile in a pack of 20.

These knife sharpeners contain two options for sharpening knives: rollers with zirconium dioxide coating for fine-tuning the blade to polish it for a softer and smoother cut and tungsten carbide coated rollers for rough sharpening of the blade, which helps to repair the damaged blade, including smoothing chips and bumps on its surface.

These knife sharpeners contain two options for sharpening knives: rollers with zirconium dioxide coating for fine-tuning the blade to polish it for a softer and smoother cut and tungsten carbide coated rollers for rough sharpening of the blade, which helps to repair the damaged blade, including smoothing chips and bumps on its surface.

Step drill bits are engineered for versatility and efficiency in metalworking applications. These bits feature a unique stepped design that allows for drilling multiple hole sizes with a single tool, reducing the need for multiple bits and saving time. Constructed from high-quality carbide and often coated for enhanced wear resistance, these step drill bits provide clean, burr-free holes in various metals, including stainless steel and other alloys. They are indispensable tools for professionals in electrical, HVAC, and sheet metal fabrication sectors.

The drawing cones are characterised by an extremely good wear behaviour, high density, as well as fine-grained structure and a very smooth and pore-free surface.

With XChange from LMT Fette, with its patented interface, for the fi rst time it has been possible to combine the advantages of carbide and steel in a modular tap. Approximately 90 % of the taps used nowadays are still made from high-speed steel. This is because this cutting material is featuring the requested toughness for absorbing the torsional moment as well as the necessary load at the cutting edge when rewinding the tap. HSS, however, is having some disadvantages also, compared to solid-carbide taps: tool life and most importantly the feasible cutting speeds and cycle times are significantly lower. With XChange two physically prohibitive properties has been combined: The solid-carbide threaded head, a combination of ultra-fine grain carbide and high performance coating, is providing: - maximum tool life - and high cutting speeds The flexible steel shank guarantees - the stability of the tool - and offers extra efficiency

[Product Description] D-PRO Series is used to cut copper, graphite, and ceramic parts, and is used for general face milling, profile & plunge milling. It is a diamond-coated End mill that is reinforced the wear resistance and enhanced the tool life. [Product Specification] Flat end mill : D0.5 ~ D12 + Various effective length / total length Ball end mill : D0.2 ~ D12 + Various effective length / total length C/R end mill : D2 ~ D12 + Various effective length / total length [Product Model] Flat : 2DRE, 2DPE, 4DPE Ball : 2DRB, 2DPB C/R : 2DRR, 4DRR [Product Use] * D pro series is pure diamond coated Endmill for cutting Graphite, Reinforced plastics, nonferrous metal etc. * Maximized thickness of coating for improvement of wear-resistance * Wide range of effective length and overall length for various work shape.

[Product Description] D-PRO Series is used to cut copper, graphite, and ceramic parts, and is used for general face milling, profile & plunge milling. It is a diamond-coated End mill that is reinforced the wear resistance and enhanced the tool life. [Product Specification] Flat end mill : D0.5 ~ D12 + Various effective length / total length Ball end mill : D0.2 ~ D12 + Various effective length / total length C/R end mill : D2 ~ D12 + Various effective length / total length [Product Model] Flat : 2DRE, 2DPE, 4DPE Ball : 2DRB, 2DPB C/R : 2DRR, 4DRR [Product Use] * D pro series is pure diamond coated Endmill for cutting Graphite, Reinforced plastics, nonferrous metal etc. * Maximized thickness of coating for improvement of wear-resistance * Wide range of effective length and overall length for various work shape.

[Product Description] D-PRO Series is used to cut copper, graphite, and ceramic parts, and is used for general face milling, profile & plunge milling. It is a diamond-coated End mill that is reinforced the wear resistance and enhanced the tool life. [Product Specification] Flat end mill : D0.5 ~ D12 + Various effective length / total length Ball end mill : D0.2 ~ D12 + Various effective length / total length C/R end mill : D2 ~ D12 + Various effective length / total length [Product Model] Flat : 2DRE, 2DPE, 4DPE Ball : 2DRB, 2DPB C/R : 2DRR, 4DRR [Product Use] * D pro series is pure diamond coated Endmill for cutting Graphite, Reinforced plastics, nonferrous metal etc. * Maximized thickness of coating for improvement of wear-resistance * Wide range of effective length and overall length for various work shape.

Allround drill with quiet operation for machining of composite materials such as CFRP and GFRP in the diameter range Ø 0.20 to 6.00 mm. Advantages: Good surface, no delamination and fiber projections, low vibration, ideal for trimming, especially for dry machining suitable (low heat) For advanced materials such as carbon, carbon fiber, glass fiber (fiberglass) with multidirectional and unidirectional fiber orientation Specials: Point angle 90° and extra thick Diamond coating