Cap nuts - Import export

The surface of the cap nut is polished and, with regard to design optimised for the use in hygienic environments. The top of the nut is spherical and the collar has a conical formed top face. The nut has been designed as a low version so as to keep troublesome corners as few as possible. Due to the extremely high quality surface finish of much less than Ra 0.8 µm, hardly any dirt particles adhere to the surface.

Cap Nut is also called Acorn Nut, Crown hex nut, blind nut or domed cap nut. It is a type of fastener which gets its name from its shape. It is a nut that has a domed top to cover the threads. This is to prevent contact with the external thread to protect the threads or protect other things the threads would rub against. In addition the dome gives a more finished appearance. It is usually made of brass, steel, stainless steel (low carbon content) or nylon. It can also be chrome plated and given a mirror finish.[1]

This plug-in sheathing thermocouple is recommended for measuring the temperature in the exhaust gas flow. It is genuinely multipurpose, mounting with the cap nut means the thermocouple does not need to be rotated, which simplifies installation and fast replacement. In addition, it has “motor sports genes” such as vibration resistance, fast response time and high temperature resistance. The benefits: Vibration-proof Fast response time High temperature resistance (up to 1,200 °C) Various installation lengths can be supplied With cap nut Sheathed thermocouple NiCr-Ni, Type “K”, Class 1

This item refers to DIN 1587 but P6.6 material is not guaranteed by norms

A1 - NFE 27453 Stainless Steel A1 - NFE 27453

Blind nuts (BLANK ECR) A4 stainless steel - DIN 1587 There is a variant in A2 stainless steel

Blind nuts (BLANK ECR) A2 stainless steel - DIN 1587 There is a variant in A4 stainless stee

Brass Acorn Nuts - NFE 27453

Caches écrous Hexagonaux Gris Anthracite RAL 7016 Polyethylene

Caches Écrous Hexagonaux Gris - RAL 7001 Polyethylene

White Hexagonal Nut Covers - RAL 9010 Polyethylene

Hexagonal Nut Covers Black RAL 9005 Polyethylene

Low Hexagonal Blind Nuts ((ECR Low Hexagonal Blind) Inox A2 - DIN 917

Self-locking Blind Nuts With Nylon Ring (ECR Blind AF) Stainless Steel A2 - DIN 986

The spigot Compact for canisters and barrels captivates everyone through its compact build, which makes the valve on the canister ideal for use in refrigerators and on racks, etc. The short discharge does not protrude out over the lower edge of the container, which makes the valve a perfect choice even when space is very limited. The discharge's specially optimised design creates an even stream of liquid with no splashing or spattering. The spigot features easy motion and a tight seal. It is screwed on with a connecting cap nut. This guarantees a vertical position of the valve and makes it possible to adjust the valve later on. The Compact spigot fits all containers with G 3/4" connecting threads. PP, PE and PTFE are materials that offer outstanding chemical resistance to acids and alkalis. The Compact spigot is the ideal addition to the compact jerrycans – for perfect storage and filling when space is at a premium!

Diode Connector Product description: Insulation material: PPE/PA Rated current(Without Diode): 30A Rated current(With Diode): 10A(Diode Rated Current 15A) Rated voltage: 1000VDC Test voltage: 6kV(50Hz,Imin)  Typical contact resistance: ≤0.25 mΩ Contact material: Copper,Tin plated Degree of protection: IP67 Overvoltage category/Pollution degree: CATIII/2 Safety degree: II Flame class: UL94-V0 Insertion force/Withdrawal force: ≤50N / ≥50N Ambient temperature range: -40℃…+85℃(IEC) Upper limiting temperature: 110℃(IEC) Connecting system: Crimp connection Nut cap locking force: 1.5-1.8Nm

1000VDC PV4.0 Diode Connector Product description: Insulation material: PPE/PA Rated current(Without Diode): 30A Rated current(With Diode): 10A(Diode Rated Current 15A) Rated voltage: 1000VDC Test voltage: 6kV(50Hz,1min)  Typical contact resistance: ≤0.25 mΩ Contact material: Copper,Tin plated Degree of protection: IP67 Overvoltage category/Pollution degree: CATIII/2 Safety degree: II Flame class: UL94-V0 Insertion force/Withdrawal force: ≤50N / ≥50N Ambient temperature range: -40℃…+85℃(IEC) Upper limiting temperature: 110℃(IEC) Connecting system: Crimp connection Nut cap locking force: 1.5-1.8Nm

1000VDC PV4.0 Diode Connector Product description: Insulation material: PPE/PA Rated current(Without Diode): 30A Rated current(With Diode): 10A(Diode Rated Current 15A) Rated voltage: 1000VDC Test voltage: 6kV(50Hz,1min)  Typical contact resistance: ≤0.25 mΩ Contact material: Copper,Tin plated Degree of protection: IP67 Overvoltage category/Pollution degree: CATIII/2 Safety degree: II Flame class: UL94-V0 Insertion force/Withdrawal force: ≤50N / ≥50N Ambient temperature range: -40℃…+85℃(IEC) Upper limiting temperature: 110℃(IEC) Connecting system: Crimp connection Nut cap locking force: 1.5-1.8Nm

1000VDC PV4.0 Diode Connector Product description: Insulation material: PPE/PA Rated current(Without Diode): 30A Rated current(With Diode): 10A(Diode Rated Current 15A) Rated voltage: 1000VDC Test voltage: 6kV(50Hz,1min)  Typical contact resistance: ≤0.25 mΩ Contact material: Copper,Tin plated Degree of protection: IP67 Overvoltage category/Pollution degree: CATIII/2 Safety degree: II Flame class: UL94-V0 Insertion force/Withdrawal force: ≤50N / ≥50N Ambient temperature range: -40℃…+85℃(IEC) Upper limiting temperature: 110℃(IEC) Connecting system: Crimp connection Nut cap locking force: 1.5-1.8Nm

Angle diecast zinc. Screws and slot nuts steel. End cap polyamide, fibreglass reinforced. Version Angle painted aluminium tone. Screws and slot nuts electro zincplated. End cap black. Note Suitable for reinforcing profile constructions and for frictional connection of profiles with each other without machining. Can also be used as fastening element (e.g. bracket) for any components. The angles have centring lugs for accurate and twistproof mounting. The centring lugs can be removed if necessary by breaking off i.e. for mounting plates. The open side can be closed off with the end cap.

Insulation material: PPE/PA Safety degree: II Rated current:35A Flame class: UL94-V0 Rated voltage:1500VDC Ambient temperature range:-40-+85(IEC) Test voltage:8kV(50Hz,1min) Suitable cable cross sections:2.5-6mm2/14-10AWG Contact resistance: less than 0.25mohm Connecting system: Crimp connection Contact material: Copper, Tin plated Nut cap locking force:0.8-1.0Nm Degree of protection:IP68(1m,1H) Upper limiting temperature:110(IEC) Overvoltage category/Pollution degree:CATIII/2

PGS is a locking device for pipes made of polycarbonate or polypropylene. It is designed to seal cap nuts to prevent their twisting and disconnection of pipes, as well as the removal of gas meters and installation of bridge cables for bypass devices for the purpose of stealing gas. The pipe locking device consists of two semicircular-shaped parts with additional holes for the sealing rope. To install the pipe locking device, it is necessary to connect both parts on the mounting nut, put the sealing rope into the special holes on the sides of PGS, and install the seal (rotary or latch one). The seal should be placed as close as possible to the locking device. The tamper-evident seal and rope will prevent intruders from keeping the fact of removal of the seal and the locking device from the nut unnoticed. When an attempt is made to perform certain actions with the aim to steal gas or water, visible signs appear on the seal, which is evidence

Our selection of School & Office products includes a number of solutions produced almost specifically with Schools in mind. This includes a vast number of products including Chair Feet, Desk Cable Tidies, Secure Nut Caps & Adjustable Feet to name a select few. Each product has been approved for use inside Schools / Offices and adheres to health and safety requirements. To view our full selection please visit us online, where a full run-down can be found. Please note that we can provide free samples for these products if required for a particular project, especially Chair Feet & Inserts which are stocked in vast quantities.

monitor suspension arm incl. cable management cover for mounting of heavy monitors with 6 - 12 kg, 360° mounting flange can be attached lateral or transverse to the profile mounting plate VESA MIS-D 75/100 compatible, adjustable viewing angle and height; accessories included: mounting flange incl. bolt and cover cap Nutfixierungsplatten screws & nuts centering plates, anti-loss washers, anti-loss washers

Cap with integrated washer that shortens the mounting time considerably and delivers an aesthetic end product. Applicable for M3, M4 and M5 screws. One dimension for several screw sizes! Material: PP Colours: without last digits = white last digits 699 = black V = for countersunk screws / M = for metric screws

Protection caps for facade screws (hexagon head screws) with round neoprene slice. Material: PE Colour: black Ø = washer diameter A production according to RAL colour chart or colour sample is possible - please send us your enquiry!

Protection against dirt and corrosion. Material: PE Colours: without last digits = black last digit W = white last digits GR = grey Further types on written request.

Material: PE Colours: last digits 600 = white last digits 699 = black

Ideal for booth construction, toolbuilding and furniture industry. Please note that diameter A should exceed the bore hole by 0.2 - 0.3 mm. Material: PE Colours: last digits 600 = white last digits 699 = black Further types on written request.