Canister pumps - Import export

The Pump Set B2 Battery is suitable for thin-bodied, aqueous to slightly viscous media. The set is suitable for removing small containers such as Canister or hobbocks. The pump is flexible at all times and thus saves important resources. The set is supplied without battery and charger * Replaceable, powerful battery with Li-Ion * Battery life approx. 35 min at maximum speed * 1 battery charge emptied approx. 12 x 200 litre container Features & Advantages * BLDC Motor with high efficiency of up to 70 * continuously adjustable * long battery life * automatic shutdown on overload * sophisticated quick lock The value of the maximum flow rate is determined on the basis of fixed parameters and always under the same conditions. These can be found on our website.

5L canisters made of rigid and chemical resistant HDPE material. Weight range: 150g - 220g Available in transparent colour or per customer request. Thread diameter: 38/410 Available closures: - 38mm cap - 38mm pump

Standard dosage approx. 4 ml per stroke. Dosing pumps suitable for barrels, canisters, carboys or bottles, for dosing liquids of different viscosities. Dosing pumps are mounted by you in your existing container closure (see the locating bore table). To do this, a suitable hole is drilled in the cap. Then the pump is inserted through the hole and screwed in place from below. A matching container connection is not included in the scope of delivery.

The solvent pump for tinplate canisters with pull-out spout puts an end to the risky decanting of dangerous substances into another container. The included thread adapter fits to the standard pull-out spouts - immediate safety! Hand-operated solvent pump for contaminationfree removal of organic solvents and flavouring agents. The hand pump works according to the overpressure principle. An excess pressure is built up in the tank with the pump ball, forcing the liquid out of the container. Pouring flammable liquids All medium-contacting parts are made of stainless steel AISI 304 (1.4301) and PTFE. The Bürkle anti-static set can be used to ground the pump for dispensing flammable liquids so that no electrostatic charge forms. Gastight version The pump can be completely closed off with the two ball valves so that no dangerous vapours can escape after dispensing. .

The Pump Set B2 Battery is suitable for thin-bodied, aqueous to slightly viscous media. The set is suitable for removing small containers such as Canister or hobbocks. The pump is flexible at all times and thus saves important resources. * Replaceable, powerful battery with Li-Ion * Battery life 35 min at maximum speed * 1 battery charge emptied approx. 12 x 200 litre container Features & Advantages * BLDC Motor with high efficiency of up to 70% * continuously adjustable * long battery life * automatic shutdown on overload * sophisticated quick lock * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C .

The Pump Set B2 Battery is suitable for low viscosity, aqueous to slightly viscous media. The set is suitable for the removal of small pads such as Canister or hobbocks. The pump is flexible at all times and thus saves important resources. . Exchangeable, powerful battery with Li-Ions . Battery life 35 min at maximum speed . 1 battery charge empties approx. 12 x 200 litre containers . BLDC Motor with high efficiency up to 70% . infinitely variable . high battery life . automatic shutdown in case of overload . sophisticated quick release * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.‌The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump.

Pump-it® canister pumps are designed for quickly and cleanly emptying canisters and small barrels up to 60 l. The hand pump is used to create excess pressure that forces the liquid out of the canister. Pump-it® is suitable for weak acids, alkalis and petrochemicals.

The B2 Battery Drum pump is suitable for thin-bodied, aqueous to slightly viscous media. The set is suitable for removing small containers such as Canister or hobbocks. The pump is flexible at all times and thus saves important resources. *Optional impeller or rotor shape * Battery life 35 min at maximum speed * 1 battery charge emptied approx. 12 x 200 litre container Features & Advantages * BLDC Motor with high efficiency of up to 70% * continuously adjustable * long battery life * automatic shutdown on overload * sophisticated quick lock * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.‌The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump.

The Drum pump is suitable for thin-bodied, aqueous to slightly viscous media. The set is suitable for removing small containers such as Canister, hobbocks and drums. The pump is flexible at all times and thus saves important resources. * Infinitely variable speed controller for the transfer and filling of small quantities * Sealless design (DL) conditionally safe to run dry * continuously adjustable * powerful Motor with improved service life * service-friendly and easy to dismantle * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.‌The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump.The max. delivery head also depends on the pump design, motor and fluid.‌

The B2 Battery Drum pump is suitable for thin-bodied, aqueous to slightly viscous media. The set is suitable for removing small containers such as Canister or hobbocks. The pump is flexible at all times and thus saves important resources. * Replaceable, powerful battery with Li-Ion * Battery life 35 min at maximum speed * 1 battery charge emptied approx. 12 x 200 litre container Features & Advantages * BLDC Motor with high efficiency of up to 70 * continuously adjustable * long battery life * automatic shutdown on overload * sophisticated quick lock * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.‌The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump.

The B2 Battery drum pump is suitable for low-viscosity, aqueous to slightly viscous media, such as plasticisers, cold cleaners and lubricants. The set is suitable for dispensing small containers such as canisters or hobbocks. The pump is flexible at all times and thus conserves important resources. The set is supplied without battery and charger. * Replaceable, powerful rechargeable battery with Li-Ion * Battery life 35 min at maximum speed * 1 battery charge empties approx. 12 x 200 litre containers Features & benefits * BLDC motor with high efficiency up to 70% * Infinitely variable * Long battery life * Automatic switch-off in case of overload * Sophisticated quick-release fastener * The max. flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20° C. The measurement is taken at the pump's discharge nozzle, without hose, nozzle or flow meter.

The B2 Vario Pump Set is suitable for thin-bodied, aqueous to slightly viscous media. The set is suitable for removing small containers such as Canister, hobbocks and drums. The pump is flexible at all times, thus saving important resources. * Infinitely variable speed controller for the transfer and filling of small quantities Features & Advantages * Sealless design (DL) conditionally safe to run dry * infinitely variable * powerful Motor with improved service life * Service-friendly and easy to dismantle * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.‌The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump.

The B2 Battery Drum pump is suitable for thin-bodied, aqueous to slightly viscous media. The set is suitable for removing small containers such as Canister or hobbocks. The pump is flexible at all times and thus saves important resources. * Replaceable, powerful battery with Li-Ion * Battery life 35 min at maximum speed * 1 battery charge emptied approx. 12 x 200 litre container Features & Advantages * BLDC Motor with high efficiency of up to 70 * continuously adjustable * long battery life * automatic shutdown on overload * sophisticated quick lock * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.‌The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump.

The B2 Vario Pump Set is suitable for thin-bodied, aqueous to slightly viscous media. The set is suitable for removing small containers such as Canister, hobbocks and drums. The pump is flexible at all times, thus saving important resources. * Infinitely variable speed controller for the transfer and filling of small quantities Features & Advantages * Sealless design (DL) conditionally safe to run dry * infinitely variable * powerful Motor with improved service life * Service-friendly and easy to dismantle * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.‌The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump.

for liquid lubricants and cleaning agents The B2 Vario Pump Set is suitable for thin-bodied, aqueous to slightly viscous media. The set is suitable for removing small containers such as Canister, hobbocks and drums. The pump is flexible at all times, thus saving important resources. * Infinitely variable speed controller for the transfer and filling of small quantities Features & Advantages * Sealless design (DL) conditionally safe to run dry * infinitely variable * powerful Motor with improved service life * Service-friendly and easy to dismantle * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.‌The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump.

The B2 Vario Pump Set is suitable for thin-bodied, aqueous to slightly viscous media. The set is suitable for removing small containers such as Canister, hobbocks and drums. The pump is flexible at all times, thus saving important resources. * Infinitely variable speed controller for the transfer and filling of small quantities Features & Advantages * Sealless design (DL) conditionally safe to run dry * infinitely variable * powerful Motor with improved service life * service-friendly and easy to dismantle * The value of the maximum flow rate is determined on the basis of fixed parameters and always under the same conditions. These can be found on our website.

The Pump Set B2 Battery is suitable for thin-bodied, aqueous to slightly viscous media. The set is suitable for removing small containers such as Canister or hobbocks. The pump is flexible at all times and thus saves important resources. * Replaceable, powerful battery with Li-Ion * Battery life 35 min at maximum speed * 1 battery charge emptied approx. 12 x 200 litre container Features & Advantages * BLDC Motor with high efficiency of up to 70 * continuously adjustable * long battery life * automatic shutdown on overload * sophisticated quick lock * The value of the maximum flow rate is determined on the basis of fixed parameters and always under the same conditions. These can be found on our website.

The Pump Set B2 Battery is suitable for thin-bodied, aqueous to slightly viscous media. The set is suitable for removing small containers such as Canister or hobbocks. The pump is flexible at all times and thus saves important resources. * Replaceable, powerful battery with Li-Ion * Battery life approx. 35 min at maximum speed * 1 battery charge emptied approx. 12 x 200 litre container Features & Advantages * BLDC Motor with high efficiency of up to 70 * continuously adjustable * long battery life * automatic switch-off in case of overload * sophisticated quick lock * The value of the maximum flow rate is determined on the basis of fixed parameters and always under the same conditions. These can be found on our website.

The Pump Set B2 Battery is suitable for thin-bodied, aqueous to slightly viscous media. The set is suitable for removing small containers such as Canister or hobbocks. The pump is flexible at all times and thus saves important resources. * Replaceable, powerful battery with Li-Ion * Battery life 35 min at maximum speed * 1 battery charge emptied approx. 12 x 200 litre container Features & Advantages * BLDC Motor with high efficiency of up to 70 * continuously adjustable * long battery life * automatic switch-off in case of overload * sophisticated quick lock * The value of the maximum flow rate is determined on the basis of fixed parameters and always under the same conditions. These can be found on our website.

The B2 Vario Pump Set is suitable for thin-bodied acids, alkalis and chemicals. The set is suitable for removing small containers such as Canister, hobbocks and drums. The pump is flexible at all times and thus saves important resources. * infinitely variable speed controller for transferring and filling small quantities * Sealless design (DL) conditionally safe to run dry * continuously adjustable * powerful Motor with improved service life. * Service-friendly and easy to dismantle The value of the maximum flow rate is determined on the basis of fixed parameters and always under the same conditions. These can be found on our website.

Filling station with electronic balance for filling of viscous or pasty liquids, e.g.: paints, varnishes, dispersions, glues, bitumen. For above level filling in coarse and fine flow of standard container types, e.g. open cans, buckets and canisters. Product supply via pump or gravity. Product feed from higher lying storage tanks via natural slope or with the help of pumps. Direct connection via product hoses to the valve. ■ fillings can be calibrated ■ filling valve that eut threads and does not drip ■ quick cleaning of the valve (the valve area in contact with the product consists of 3 parts) ■ very fast cleaning of the container ■ quick conversion to other packing sizes ■ perfect for small and medium-sized filling ■ filling, sealing and palettizing by one person ■ the filling station needs only little space ■ immédiate readiness for operation, only connection to energy (electricity and compressed air) and product supply, and filling can be started

Semi-automatic filling station with electronic balance for filling of viscous or pasty liquids, e.g.: paints, varnishes, dispersions, glues, bitumen. For above level filling in coarse and fine flow of standard container types, e.g. open cans, buckets and canisters. Product supply via pump or gravity. The filling station has the following advantages: ■ fillings can be calibrated ■ filling valve that eut threads and does not drip ■ quick cleaning of the valve (the valve area in contact with the product consists of 3 parts) ■ very fast cleaning of the container ■ quick conversion to other packing sizes ■ perfect for small and medium-sized filling ■ filling, sealing and palettizing by one person ■ the filling station needs only little space ■ immédiate readiness for operation, only connection to energy (electricity and compressed air) and product supply, and filling can be started

Convenient pump dispenser for our 5L sanitiser canister.

Cleaner, solvent-based or without labelling obligation, technical and medical products, cosmetic products in different packagings, pump sprays, canisters, barrels