Can drum - Import export

Wholesale Empty Oil Barrels available

The storage area of the drum holder can be adjusted for height and provides a place for setting down the filling container directly under the discharge of drum pumps. This prevents the danger of the liquid splashing while being poured from a high height – for example if the filling container is standing on the floor. The user also has both hands free while dispensing and is able to remove larger quantities conveniently. A scale with container can also be placed on the storage area so the liquid that is being dispensed can be measured accurately. The holder can be used for Bürkle pumps with discharge tube or discharge hose. Discharge hoses can easily be inserted into the foldaway fastening. Can be used for plastic or stainless steel drums.

The filling support makes it easy to dispense liquids and correctly dose from Bürkle's 10-litre compact jerrycan. The compact jerrycan sits on the inlets in the holder and is fixed in place with a tightener. That makes it impossible for the container to slip out. The jerrycan can be reliably guided with the swivelling holder and the liquid medium can be dispensed and transferred without expending any great effort. The jerrycan can be stored on the dispensing stand or it can be exchanged quickly and easily with a tightener. The filling support can be used wherever the compact jerrycan is used, for example in laboratories, in industry or in food applications.

The extensive and many-sided drum clamp programme of KAUP encloses attachments which clamp, tip and turn single drums. Other attachments can carry up to four drums pre and side by side. The wide port folio is complemented by special solutions for the transport of special drums, by slip-on drum arms and drum tipping arms for already existing fork clamps.

We offer an extensive range of drum and barrel heaters and container heaters: Heating jackets, silicone drum heaters, base drum heaters and insulating but unheated drum jackets and lids for heating and insulating plastic and metal drums respectively containers. According to the destined application we use polyester, silicone, teflon and glass fibre for our drum heaters and container heaters. Some of the materials are coated and multi-layered resp. combined. Our drum heaters can be used individually and in combination and can be ordered and delivered online (shop.freek.de) for all standard drum sizes (25 / 50 / 105 / 200 litres). Of course, we also manufacture our heating jackets, heating sleeves, base heaters and insulating bonnets individually to fit your container and your special application. HC - Heating cabinets If you heat several drums or containers together or need a container heater for the ATEX area, the heating cabinets from our partner Amarc are the right choice.

Accurate weighing system: This machine is equipped with a highly accurate weighing system that ensures precise filling of liquids into drums. Easy to operate: The semi-automatic filling machine is user-friendly and easy to operate. It requires minimal training for operators to handle it. High filling speed: The machine has a high filling speed that helps save time and increase productivity. Durable construction: The robust construction of the machine ensures its longevity and stability. It is made of high-grade stainless steel, which makes it resistant to corrosion. Flexible design: This semi-automatic machine is highly adaptable to different sizes and shapes of drums. It can accommodate a wide range of container sizes and volumes. Low maintenance: The machine is designed for ease of maintenance and requires minimal upkeep. The components are easily accessible for routine cleaning and maintenance. Safe and reliable: With safety features such as emergency stop buttons and door sensors

Hydraulic forklift for lifting and transporting steel drums of 210 lt. The particular shape of the angled front supports allows the loading and unloading on each type of pallet or platform. The hydraulic lifting system coupled to automatic hooking/unhooking and high maneuverability allows a single operator to handle drums in maximum security. The maximum distance between the ground and the bottom of the drum is 500 mm. The FP 450 DT hydraulic drum trolley can be used exclusively for handling welded metal drums, with rim and screw caps Tri Sure, having a diameter of 600 mm with a height of 900 mm and a maximum capacity of 210 liters. The lifter is supplied complete with usage and maintenance manual and regular CE certification.

FPHK 285-C - DRUMS TILTER FOR FORKLIFTERS The FPHK 285-C tilter has a fork-mounted structure and is suitable for lifting and emptying metal drums from lt. 200 with diameter mm. 580-600. The device is complete with a band for locking the drum, a frontal safety rod and an angular transmission with a handwheel for rotation. The tilter can also lift plastic drums with edges but only of the type that can be seen in the picture.

The sealless Drum pump F/FP 424 is ideal for transferring various low-viscosity, also aggressive media. It is suitable for media that flow quickly and neither bond, crystallize nor are abrasive. With this pump you can empty drums, IBCs and also basins. Distinct feature, only at FLUX: The specific construction with spiral-shaped guide bearing in the inner tube prevents unwanted deposits in the pump and increases the service life significantly. The pump is available in stainless steel, polypropylene or polyvinylidene fluoride. Benefits: - No seal wear - Optimal emptying of the inner tube - High service life - Low wear of guide bearing and shaft - Long life circle of bearings - Particularly suited for hydrochloric acid and chromic acid - Can be temporarily operated against closed valve (hand nozzle, valves etc.) until the indicated temperature of the materials is reached - Stainless steel version for use in hazardous area

Lactic acid in various qualities Liquid / powder Packaging: can, drum, IBC, bulk, bags

Net weight filling machines use a weigh scale platform to monitor the weight of product as it is filling into a bottle or container. Net weight fillers are well suited for large container filling applications. This type machine is used for 5kg -30 kg,and 50KG to 300KG, and IBC system liquid filling. both of gravity filling or pump feeding liquid system with weight scale under filling nozzle or under the conveyor to assure filling accuracy. It can finish a series of operations automatically, such as bottle inlet, weight filling, and bottle outlet. Especially for SL, edible oil lubrication. it is a nice choice for foodstuff, pharmacy, cosmetic and chemical industries.Linear type machine, can be made with 2/4/6/8 filling nozzle for different filling capacity.

Sodium lactate liquid and powder food / pharma Packaging: 25 kg can, 20 kg bag, drum Origin: EU

The ViscoMT-XL drum emptying system offers a modern way of emptying containers. The following advantages result from the use of eccentric screw pumps for the removal of the medium: - container sizes from 50 l - viscosities of approx. 80,000 - 2,000,000 mPas - Bridge frame can be driven underneath with drums on pallets - very low shear stress of the medium - very low pressure load of the medium (max. 18 bar) - Removal of media loaded with fillers - no backflow within the sampling pump - electrical control of the pump with pressure control - valve-free pump system - no material pressure reducer necessary due to electronic pressure adjustment - very good residual emptying (less than 1% residue) - electronic "empty" and "almost empty" message Application: - Removal of media directly from the delivery container, e.g. silicones, adhesives, resins, greases, colour pastes, metal-filled pastes (Cu and Ni solder pastes, Al and Ag pastes) - supply of media to dispensers

The NPACK drum liquid weighing filling machine is a piece of packaging equipment used to weigh and fill liquids into 100L to 300L drums. A weighing platform (weighing system), a filling nozzle or several filling nozzles, a control panel, and a roller conveyor system comprise the majority of the equipment. The weighing platform measures the weight of the drum before and after filling to ensure that the correct amount of liquid is filled. The filling nozzle is used to transport liquid by gravity or pump from a storage tank or container to the drum. The operator can set and monitor the required weight of the filled drum, as well as regulate the filling process, using the control panel. The conveyor system is used to move the drums to and from the filling station. Main Applicaton fields: Oil Solvent such as thinner Liquid sugar Cooking oil and resin Resin Food and beverage such as soy sauce Paint and varnish Other liquid chemicals

Drum clamp to be installed on the forks of the forklift. The clamp is made of a sturdy steel frame and fork mounted with a forklift, the locking is ensured by two screws and a chain with safety catch that prevents the clamp from sliding off the forks. The coupling and release system of the drum is automatic and the operator must not get off the forklift. It is sufficient to bring the clamp close to the drum and lift. Closing of the clamp is favored by the weight of the drum; to unhook it, simply place the drum on the floor. The clamp cannot be used to handle empty drums. The clamp is suitable for 210 lt metal drums with a diameter of about mm. 580. The pliers can also lift plastic drums with edges but only of the type that can be seen in the picture.

BORSIG supplies synthesis gas boilers for gas pressures up to 350 bar (35,000 kPa) and steam pressures up to 160 bar (16,000 kPa). They are used in the synthesis gas loop of ammonia plants. The boilers are equipped with U-tubes and can be mounted both in the vertical as well as in the horizontal positions. With both designs, the steam drum can be integrated into the boiler if requested by the customer. At the same time, a feed water pre-heater can be installed in the boiler when required.

When the going gets tough, the IMPACT 200 is the most reliable and durable lifter. This is because it effortlessly copes with of up to 200 kg total weight. And with amazing stamina, too. Thanks to its exchangeable batteries, it can work 24 hours a day for you without loss of power. We have designed a range of electrical and manual tools for really heavy tasks, and you can configure these as required. You can easily move reels or drums by remote control for example, according to your choice. This not only makes your processes more fluid, it also gives you a whole new level of flexibility in terms of the efficiency of your existing production processes. In addition, you can choose the right mast height, undercarriage and platform to suit your operations.

Cortec VpCI® 422 Rust Remover - 5 Gallon Drums. Cortec VpCI® 422 is a versatile rust-fighting solution packaged in convenient 5-gallon drums.Designed to tackle rust head-on, it not only effectively removes it but also shields metal surfaces from future corrosion.Key benefits include its ability to transform rust into a removable black coating while simultaneously forming a protective barrier. This water-based formula is safe, non-toxic, and non-flammable, making it suitable for various metals.Easy application through brushing, rolling, or spraying ensures wide-ranging use across industries like automotive, oil and gas, and construction.By converting rust into a stable iron oxide and leveraging Vapor phase Corrosion Inhibitors (VpCIs), Cortec VpCI® 422 offers long-lasting protection against harsh environments.

The FR series is a fast running electric drum mixer that can directly be mounted on 200 l steel drums with a 2“ bung hole. The mounting on the drum is done with a 2” threaded adapter with which the agitator is screwed into the bung hole. The agitator shaft is connected to the drive shaft by means of a sleeve coupling. Folding propellers are used as mixing elements, which can be inserted into the drum through the 2” bung hole when being folded. The FR series mobile mixer is delivered as a turn-key solution with an on-/off-switch with low voltage breaker and connection cable. Upon request, the FR series mixer can also be supplied with an integrated frequency inverter. Additionally we can provide you with a vessel clamp applicable for open lid drums.

The FRP is Geppert Ruhrtechnik’s fast running pneumatic air mixer that can be directly mounted on 200 l steel drums with a 2“ bung hole. The FRP is mounted onto the drum with a 2” threaded adapter. The agitator is screwed into the bung hole. We do offer one drive especially adapted for low viscous media and one drive especially adapted for medium viscous media of up to 1,000 mPas. The agitator shaft is connected to a bearing shaft within the drum mixer housing by means of a sleeve coupling. This bearing shaft is connected to the drive shaft. Folding propellers are used as agitator elements, which can be inserted into the drum through the 2” bung hole when being folded. As a mobile mixer, the FRP can be delivered as a turn-key machine with a service kit for the lubrication of the compressed air and a noise muffler.

Lightweight electric mixer with direct screwing into 2“ bung hole. The FR-LX series mixer stands for easy handling. Aluminum being the material of the housings and the adapters, this is a lightweight solution with a total weight of only 10 kg. The agitator is screwed directly onto the on-top 2” bung hole of the tank thanks to either a 2”-steel or a 2”-fluoroware coupling. Therefore, this agitator can not only be screwed onto steel tanks but also onto plastic tanks with bung hole. The mobile mixer FR-LX is by default equipped with an on-/off-switch with low voltage breaker and connection cable. The FR-LX could also be equipped with a frequency inverter upon request. Additionally, we can supply your open lid drums with a traverse bridge or a vessel clamp.

FRP - Pneumatic drum mixer The FRP is Geppert Rührtechnik’s fast running pneumatic air mixer that can be directly mounted on 200 l steel drums with a 2“ bung hole. The FRP is mounted onto the drum with a 2” threaded adapter. The agitator is screwed into the bung hole. We do offer one drive especially adapted for low viscous media and one drive especially adapted for medium viscous media of up to 1,000 mPas. The agitator shaft is connected to a bearing shaft within the drum mixer housing by means of a sleeve coupling. This bearing shaft is connected to the drive shaft. Folding propellers are used as agitator elements, which can be inserted into the drum through the 2” bung hole when being folded. As a mobile mixer, the FRP can be delivered as a turn-key machine with a service kit for the lubrication of the compressed air and a noise muffler. Additionally we can provide you with a vessel clamp applicable for open lid drums.

FR-LX - Lightweight mixer Lightweight electric mixer with direct screwing into 2“ bung hole. The FR-LX series mixer stands for easy handling. Aluminum being the material of the housings and the adapters, this is a lightweight solution with a total weight of only 10 kg. The agitator is screwed directly onto the on-top 2” bung hole of the tank thanks to either a 2”-steel or a 2”-fluoroware coupling. Therefore, this agitator can not only be screwed onto steel tanks but also onto plastic tanks with bung hole. The mobile mixer FR-LX is by default equipped with an on-/off-switch with low voltage breaker and connection cable. The FR-LX could also be equipped with a frequency inverter upon request. Additionally, we can supply your open lid drums with a traverse bridge or a vessel clamp.

FR - Electric drum mixer The FR series is a fast running electric drum mixer that can directly be mounted on 200 l steel drums with a 2“ bung hole. The mounting on the drum is done with a 2” threaded adapter with which the agitator is screwed into the bung hole. The agitator shaft is connected to the drive shaft by means of a sleeve coupling. Folding propellers are used as mixing elements, which can be inserted into the drum through the 2” bung hole when being folded. The FR series mobile mixer is delivered as a turn-key solution with an on-/off-switch with low voltage breaker and connection cable. Upon request, the FR series mixer can also be supplied with an integrated frequency inverter. Additionally we can provide you with a vessel clamp applicable for open lid drums.

Our products are manufactured in conformity with Reach, Rohs and Pah. Production is carried out in conformity with FDA. Our products are made in the diameter, length and hardness you want.

Reduce your drum disposal costs of drums by compacting them down into discs. There are slots inside the machine chamber to hold the drum into place during compaction and spikes to punch the drum to drain out any residual oil into a collection tank. The high compaction radio of 5 to 1 gives businesses a massive space saving on there site and in some cases reduced disposal costs. The completely enclosed compaction chamber with safety switches installed on the loading door for safe operation of the machine. There are lifting points for a fork truck built into the base of the drum crusher for easy transport and installation.

The drum crusher can compact empty 220 litre oil drums / barrels into a steel disc. There are slots inside the machine chamber to hold the drum into place during compaction and spikes to punch the drum to drain out any residual oil into a collection tank. The high compaction radio of 5 to 1 gives businesses a massive space saving on there site and in some cases reduced disposal costs. The completely enclosed compaction chamber with safety switches installed on the loading door for safe operation of the machine. There are lifting points for a fork truck built into the base of the drum crusher for easy transport and installation.

Agromeks - New Generation Moving Drum Jaguar Stone Collecting Machine is a superior agricultural equipment that has become an important player in the agricultural sector and maintains its leading position in transforming stony lands into productive agricultural areas. The most striking feature of this machine is its springless floating bearing drum system. This system makes it possible to easily collect stones from 3 cm to 50 cm, thanks to the up-down moving drum beds that can adapt to sudden load changes during operation. Larger warehouse volume increases efficiency by offering up to 9,000 kg stone storage capacity . It has an innovative design, embroidered tank plates and a three-layer hood system. Agromeks - New Generation Jaguar Stone Collecting Machine with Movable Drum is designed to process your soil while collecting stones from the surface to a depth of 30 cm on your land with a spring sieve and special drum system.