Calibration certificates - Import export

Are you looking for a reliable solution for monitoring vaccines for cryogenic storage or extremely low temperatures? Lascar Electronics has paired its EL-USB-VAC thermistor probe data logger with a glycol bottle thermistor probe for users who need a complete vaccination temperature monitoring system. The EL-USB-VAC can display and record more than 32,000 measurements from the included thermistor probe. It has an LCD display and push buttons that allow the user to view the most recent, highest and lowest stored temperature readings. The software enables fast configuration and data download via the USB port. Supplied with glycol bottle thermistor probe, long life lithium battery, traceable calibration certificate and software.

Digital torque wrench tester with manual loader. Ideal for torque wrench calibration and adjustment. Pole holder and plate are equipped on all models, which helps keep wrenches in optimal testing position. Peak/Run modes with 10 customizable hi/lo judgment patterns. Colour Judgement Display makes it easy to confirm readings are within your set parameters. Up to 1000 measurement data items can be stored in the memory. Global units of measure selection by keypad: cNm, NM, kgf.cm, kgf.m, lbf.in, lbf.ft. Sample quantity, maximum value (Hi), minimum value (Lo) and mean value can be displayed. Includes Calibration Certificate: ILAC MRA. CE markings applied for use in the EU. [...]

The Perfect Database for the Control of Torque Tool Calibration Torque Tool Manager 4.0 software is calibration and certification specifically designed to work with System 8® and Torq-Tronics 2® Digital Torque Testers! It will fulfill your TS 16949 and ISO calibration certificate requirements far more cost-effectively than manual record keeping systems! Torque tool calibration requires attention to detail in every respect, and maintenance of records pertinent to all factors - as well as creating certificates of calibration for each calibrated item. When all of this can be automated the process becomes more efficient, less prone to error, and less costly to operate. Torque Tool Manager, used with SR digital torque testers, improves control and efficiency for almost all of the operations. Specifications and tester settings are stored in the software and downloaded to the tester exactly when needed. The technician is guided and supported by the software during the testing, and...

The multipurpose digital indicator TRANS CAL 7281 can be used wherever there is a need to perform high-precision, in-situ calibrations of sensing components used in equipment such as presses, torque tools or pressure-regulating systems. An optional factory calibration certificate or German-accredited DKD/DAkkS calibration certificate can be provided when the measurement device needs to be used as a reference. This provides a quick and cost-effective way of assessing a system with traceable documentation of measurement results. If a reference measurement cannot be made because the sensor location is difficult to access, it is still possible to test the zero point, the input, output and isolation resistance as well as the calibrating offset of the fitted sensor. It is also possible to check the indicating device by measuring the excitation voltage and simulating the characteristic values (mV/V or V) of the sensor used.

The force measuring chain is an universal reference measuring chain for the calibration of press-fit force measuring equipment. It finds applications in the quality assurance, commissioning and equipment monitoring fields. A DAkks calibration certificate is included so that the force measuring chain can be traced back. The calibration is traceable through accreditation at the German Accreditation Body. The calibration certificate records the displayed values for mounting positions at 0°, 120° and 240°. During calibration in field, the reference load cell is inserted in line with the flux of the press-fit measuring equipment. The force application is of central significance here for the quality of the measurement. Special force application parts are required, so that the line of action of the force agrees as exactly as possible with the geometrical axis of the load cell that is to be measured (central loading).

The 9206 USB sensor interface series is ideally suited to Notebook-based mobile use for high-precision, traceable calibration jobs that must be performed on-site for equipment such as presses, torque measurement facilities and pressure control systems. A factory calibration certificate or German-accredited DAkkS calibration certificate can optionally be provided for the USB interface plus relevant sensors, ensuring compliance even with the stringent traceability requirements of quality assurance standards. Specific characteristics: —Cost effective "Plug&Measure" concept —24-bit resolution —Practical and convenient DigiCal calibration and data acquisition software —Pt100 as option —Free LabView driver DLL for integrating in your own software environment —Multipurpose reference measurement chain with optional factory calibration certificate or Germanaccredited DAkkS calibration certificate —6-wire connection technology

Tohnichi's AMRD series torque screwdriver provides same features as series RTD, except designed for tightening small screws. Thereby this model is ideal for assembly of watches, precision electronic equipment, computer, etc. Via micrometer scale torque can easily and quickly be adjusted. Index finger holding feature allows the operator to tighten with precise movements. Upon reaching the set torque, it clicks to signal tightening is complete. Integrated rotary clutch mechanism reliably prevents over-torque. Key Features: - Accuracy and calibration compliant to ISO 6789 type II class D - Micrometer adjustable - Clockwise direction - Click signal - Rotary clutch - Calibration certificate (ISO/JIS) incl. Options: - Counterclockwise tightening model available on request. - Optionally available in metric (gf·cm) or in english units (lbf·in, ozf·in).

Adjustable Click-Type Screwdriver with Micrometer Scale. The LTD torque screwdriver is suitable for various applications from series production to maintenance work. The desired torque can be set quickly and easily using the micrometre scale. All models are equipped with a locking mechanism that prevents the torque from being changed during use. Like RTD but with a click signal instead of the slip clutch. Ideal for applications that are sensitive to vibration and where rotary clutch vibrations might be problematic. Key Features: Accuracy acc. EN ISO 6789 type II class D Micrometer adjustable Clockwise direction Click-signal Hex bit insert E 6.3 (1/4 inch) Scope of Supply: Torque Screwdriver LTD Resin grip for model 120CN and 260CN Calibration Certificate (ISO/JIS) Original user manual (jap./eng.) [...]

For precision tightening of fine screws (M1-M2). Tohnichi's BMLD series torque screwdriver is designed for tightening small screws. Thereby this model is ideal for assembly of watches, precision electronic equipment, computer, etc. Via micrometer scale torque can easily and quickly be adjusted. Index finger holding feature allows the operator to tighten with precise movements. Upon reaching the set torque, it clicks to signal tightening is complete. Like BMRD but with a click signal instead of the slip clutch. Ideal for applications that are sensitive to vibration and where rotary clutch vibrations might be problematic. Key Features: Accuracy acc. EN ISO 6789 type II class D Micrometer adjustable Clockwise direction Click signal Calibration Certificate (ISO/JIS) [...]

Adjustable Torque Screwdriver for Small Screws (M1-M2) Tohnichi's BMRD series torque screwdriver provides same features as series RTD, except designed for tightening small screws. Thereby this model is ideal for assembly of watches, precision electronic equipment, computer, etc. Via micrometer scale torque can easily and quickly be adjusted. Index finger holding feature allows the operator to tighten with precise movements. Upon reaching the set torque, it clicks to signal tightening is complete. Integrated rotary clutch mechanism reliably prevents over-torque. Key Features: - Accuracy and calibration compliant to ISO 6789 type II class D - Micrometer adjustable - Clockwise direction - Click signal - Rotary clutch - Calibration certificate (ISO/JIS) incl. Options: - Counterclockwise tightening model available on request. - Optionally available in metric (gf·cm) or in english units (lbf·in bzw. ozf·in).

Simple assembly line/workshop torque tester for torque wrenches. The Wrenchmate is a robust, simple, user-friendly unit for checking and setting torque Wrenches. It is strong and robust and designed especially for a workshop environment. The Wrenchmate can be fitted to a wall, steel structure or at the end of a bench or workstation. The Wrenchmate has a large, easy-to-read screen with clear LED digits and a clever dual-colour torque display that is visible in all light conditions. The torque tester can also be switched between Nm and lb.ft measurement units. Three versions are available for testing tool torque up to 1100 Nm, all of which are supplied with a 12V PSU power supply and a traceable calibration certificate. Key Features Aluminium alloy housing with powder coated finish Accuracy ±1% reading (±1 digit) over the operating range Alternate measurement units from Nm to lb.

Ratchet Head Clicker Wrench. Adjustable type wrench, ideal for variety of tightening torque applications up to 2800 Nm. The ratchet head has 24 teeth with a 15 degree operating range, allowing for use in space-limited working conditions. Torque setting is easy to adjust. The "never-lost" built-in torque adjustment handle makes torque changes easy even without a special-purpose tool. All QLE2 models have an extension handle that separates from the body for compact storage. A clear “click” sound signals tightening completion upon reaching the set torque. Key Features Accuracy and calibration procedures compliant to ISO 6789 type II class A Reversible Ratchet with 24 teeth and 15° operating range Easy torque adjustment by means of built-in handle Rugged knurled metal handle Audible and tactile click in clockwise rotation Traceable calibration certificate (ISO6789) included

Adjustable Torque Screwdriver with Micrometer Scale. The RTD torque screwdriver is suitable for various applications from series production to maintenance work. The desired torque can be set quickly and easily using the micrometre scale. All models are equipped with a locking mechanism that prevents the torque from being changed during use. Once the set torque has been reached, the integrated rotary slip clutch reliably prevents the screw from being overtightened. Key Features: Accuracy acc. EN ISO 6789 type II class D Micrometer adjustable Clockwise direction Rotary clutch mechanism ('Cam-Over') Hex bit insert E 6.3 (1/4 inch) Scope of Supply: Torque Screwdriver RTD Resin grip for model 120CN and 260CN Calibration Certificate (ISO/JIS) Original user manual (jap./eng.)

Dial Indicating Torque Screwdriver with mNm scale Tohnichi's MTD series torque screwdriver is suitable for inspection and tightening of very small screws, e.g. small torque motor shafts or the like. Torsion bar mechanism makes accurate measurement possible. With bi-directional scale plate, it can be used for both retightening and loosening torque testing methods. Memory pointer captures peak torque. Applicable for international use including the EU region. Compliant with calibration procedures of ISO 6789 Type I Class D. Key Features: - Bi-directional scale - Peak torque indication via Memory Pointer - Accuracy and calibration compliant to ISO 6789 type I class D - Bit insert #2 Tohnichi Shipping List: - Screwdriver MTD - Calibration Certificate (ISO/JIS) - Operating Manual - Special Bits Cross #0, Slotted 0.15x1, 0.2x1.5, 0.3x2 Options: - Alternatively with english units (ozf·in) available. Metric scale (gf·cm) on request.

Tohnichi's FTD-S series torque screwdriver is ideal for inspecting tightened screws. With bi-directional scale plate, it can be used for both retightening and loosening torque testing methods. Memory pointer captures peak torque. Model FTD8N-S and FTD16N-S comes with auxiliary tightening tool ("T-Grip") as standard accessory. Applicable for international use including the EU region. Compliant with calibration procedures of ISO 6789 Type I Class D. Key Features: - Bi-directional scale - Peak Torque indication via Memory Pointer - Coloured dial plate - Accuracy and calibration compliant to ISO 6789 type I class D - Tool insert 1/4 inch Shipping List: - Screwdriver FTD-S - Traceable Calibration Certificate (ISO/JIS) - Operating Manual Options: - Models with metric scale (gf·m, kgf·m) on request. Related Products Insert Bits with 1/4“ hex drive acc. DIN 3126 E6.3

Preset Torque Screwdriver Sturtevant Richmont PM-Series Preset Torque Screwdrivers are ideal for any application where 1. high repeatability for low torque is needed, 2. excellent durability and versatility is needed. These needs are common in high-precision assembly operations and for maintenance tool kits for electronic and electro-mechanical products. The operator cannot overtorque. A clutch releases automatically when desired torque has been achieved. The anti-backlash design enhances the repeatability. PM torque screwdrivers are incredibly durable. Many owners experience a service life of 15+ years. Key Features: - Bi-directional accuracy of ± 6% i.v. (20-100% of capacity) - Meets or exceeds ASME B107.300-2010 & EN ISO 6789 - Anti-backlash design - Short dwell designed to prevent repetitive motion injuries - 1/4 hex drive (C 6.3) Can be ordered preset from factory with certificate of calibration from SR's ISO/IEC 17025 Accredited Calibration Laboratory.

Our radiometric sensors accurately measure the UV irradiance or illuminance with the RM-12 or RMD radiometer and the UV-MAT dose control. The built-in diffusers ensure the cosine correction that is required for non-vertical irradiation. The sensors are calibrated with traceability to PTB (Physikalisch Technische Bundesanstalt, the German national test authority); after being calibrated, they are supplied with a factory calibration certificate. Excellent long-term stability is achieved through the use of appropriate materials. Of course, a repair and spare parts service is available for many years. The integrated electronics produce a signal voltage that is transmitted to the radiometer. Various sensors can be used with a radiometer by means of internal electronics.

With our UV probes, we offer calibrated probes for measuring of the irradiance in areas that are difficult to access. The UV probes are available in three versions and several standard lengths of 15 cm to 60 cm. With an outer diameter of only 6 mm, the UV probes are a perfect supplement for the precise radiometers RMD, as well as for the spectral radiometers UVpad E and SR900. All UV probes come with a diffuser, which enables the absolute measurement of irradiance and which ensures the required cosine correction during a non-perpendicular irradiation. The UV probes are, together with the radiometers, traceably calibrated to the PTB, recalibratable and are supplied with a calibration certificate by the factory. By using appropriate materials, an outstanding long-term stability is reached. A repair service and parts supply is of course available for many years.

The PLC UV sensors and VIS sensors serve as precision sensors for the measurement of UV irradiances and illuminances in systems with programmable logic controllers (PLCs). Spectral range, measuring range, operating voltage, and output signal can be selected to match the measurement task and the PLC. The integrated electronics generate a signal voltage that is transmitted with the low interference cable to the PLC. The built-in diffusers provide the required cosine correction. The sensors are calibrated with traceability to the PTB (Physikalisch Technische Bundesanstalt, the German national test authority); after being calibrated, they are shipped with a factory calibration certificate. Excellent long-term stability is achieved through the use of appropriate materials. Of course, a repair and spare parts service is available for many years. Our product range includes eight spectral ranges and three measuring ranges for the sensors.

The UV inline sensor FLT is a compact, and precise measuring system for irradiance measurements in UV facilities, as packaging systems disinfection systems systems for surface activation UV curing systems Aging & test chambers The system consists of a compact inline sensor for fixed installation or use with radiometer RMD / RM-12. Reference measurements are simple and precise due to indentical shape of both sensor versions. Our product range includes eight spectral ranges and four measuring ranges for the sensors. This allows the radiometric sensors to be optimally adapted for the application. The sensors are calibrated with traceability to PTB (Physikalisch Technische Bundesanstalt, the German national test authority); after being calibrated, they are supplied with a factory calibration certificate. The RMD is characterized by a very high resolution, a high measuring range, a data interface and the illuminated graphic display.

The dose controller UV-MAT continuously measures irradiances, calculates doses, and stops irradiation at the set target dose. Two spectral ranges can be separately controlled. Thus, UV-MAT ensures a constant dose independent from lamp aging, temperature, and pollution. The measurements are made with calibrated radiometric sensors. The built-in diffusers ensure the cosine correction that is required for non-vertical irradiation. The sensor contains an extremely precise analog-digital converter and a temperature sensor. The integrated diffuser ensures the required cosine correction. Excellent long-term stability is achieved through the use of appropriate materials. The sensors are calibrated with traceability to PTB (Physikalisch Technische Bundesanstalt, the German national test authority); after being calibrated, they are supplied with a factory calibration certificate.

11 torque range from ± 0 - 0,5 Nm to ± 0 - 1000 Nm current and voltage output measurement accuracy ≤ 0.25% contactless signal transmission proven strain gauge technology built-in signal amplifier simple power supply universally applicable RPM measurement optional The new features: more versatile mounting options torsion shaft stainless mistake-proof installation oriented mounting large coupling selection The torque sensors of the DRBL series are a further development of our DRBK series and are suitable for use in the laboratory and for industrial environments with their compact dimensions and diverse mounting options. A factory calibration certificate with 25% increments (left, right) is included in the scope of delivery. The non-contact transmission of the measurement signal and the supply energy enables low-wear and m aintenance-free continuous operation.

The digital pressure gauge DM 01 is a precision device fulfilling highest demands. It was conceived especially for the process monitoring and calibration. The advantage: With the digital display DM 01, different pressure transmitters can be used for various measurement ranges. Outstanding measuring qualities, an intuitive operation, as well as an innovative, modular sensor concept characterise the DM 01. The battery-powered digital pressure gauge can be used e.g. for controlling pressure courses or calibrating pressure transmitters. Features: — nominal pressure: 0 ... 100 mbar up to 0 ... 400 bar — accuracy: 0.05 % FSO BFSL (class 0.05) — modular sensor concept — graphics-capable display — background illumination — communication interface USB 2.0 — stainless steel housing d = 100 mm — zero point calibration — data logger Optional Features: — accredited calibration certificate — IS-version zone 0/1

The certification of gauges is based on checking that the instrument maintains the prescribed measurement tolerances and MSA processes that confirm the stability of the measurement process of the gauge used in different conditions and by different people. Tests and control and measurement devices undergo the process of checking the current state, and then we carry out the calibration process and recertification. We carry out the certification and calibration process of the gauges in accordance with the procedures resulting from ISO 17025 , which confirms the credibility of our work. At the client's request, we perform work in accordance with the requirements and processes resulting from the individual features or parameters of a given measuring instrument. Calibration of the gauges Calibration is an integral part of the construction and production processes of control and measurement devices and gauges, and is also used during service or repair work.

The PPA 2500 purge pressure analyser is used for setting an monitoring the ID purge pressure. It replaces the analogue Magnahelic devices traditionally used for applying the ID pressure balancing technique used for producing high-quality “controlled profile” welds on small diameter applications. The connection with the Tigtronic Orbital 4, Tigtronic Compact and EVO controllers enables documentation. Package includes: — Purge Pressure Analyser — Sampling Hose — 6mm T-fitting — Calibration certificate — Plastic box

The EVO Industry 4.0 series is new to the market. Several systems, initially compact as the 200 A Autorange and now also modular in connection with the Tetrix inverters. The systems are small, lightweight and handy and offer a high-resolution colour display, multilingual intuitive user guidance due to a colour touch interface, or alternatively operation using a membrane keyboard, a stable operating system (without data loss during power outages and quickly ready for use again), full access through tablet with QR-code scanner, data transfer via USB, LAN and WLAN, fault analysis program, manufacturer support via remote maintenance, a mountable cooling unit as an option, and many other functions... Package includes: — Orbital welding system — Display transport protection — Calibration certificate — USB stick Optional: — Water Cooling Unit COOL 50 or EVO COOL — EVO Remote Control — Gas Controller Box

Proper purging is absolutely essential to guarantee high-quality welding of high-alloyed, corrosion-resistant components. As part of this the Oxy EVO oxygen analyser can be connected to our orbital welding controllers for the purpose of inspecting and documenting the residual oxygen content and evaluated. — Extremely easy menu navigation — For inert gases and gases containing H2 (max. 10%) — Measuring cell made of zirconium oxide (maintenance-free) — 3.5" colour touch display — USB interface for exporting documentation — Digital and analogue interface and Bluetooth for communication with our orbital welding controllers and other PSPS — Activation and evaluation exclusively using the digital interface — User-definable threshold and alarm adjustment — Acoustic signal generator ... Package includes: — Oxygen analyser — Power cable — Hose set, 3 m, incl. filter and probe — Calibration certificate — Transport case

Measuring devices are the first step to the perfect weld. Precise purging is essential for controlling weld quality, particularly when welding high-alloy, corrosion-resistant materials that are highly sensitive to oxygen in the welding process. Oxy Smart: — Battery powered device — For inert gases — For mixed gases with hydrogen (max. 10%) — Measuring cell made of zirconium oxide (maintenance free), long lifetime through intelligent software — Robust for use at site (protective frame out of rubber) — Dust- and moisture-proof, also for use around high humidity — Intuitive operator guidance through symbols — Coloured enlighten display — Battery indicator — Fault indication in case of error Package includes: — Oxygen analyser — Charging cable with various adapter plugs for worldwide use — Hose set, 1m, incl. filter and stainless steel probe — Calibration certificate — Plastic case with inlay

The DATAPAQ EasyTrack3 thermal profiling system is the third generation of the globally accepted EasyTrack brand successfully used by powder and paint coating applicators and suppliers. The DATAPAQ ET3 datalogger guarantees accurate temperature profiling and is designed with the easy two-button operation. Improved logger memory of x3 permits the profile detail your coating process demands (0.5 s sample interval = 2.5 hours run). A battery life is improved x2.5 over previous gen. Performing safely in up to 85 °C/185 °F, the plastic cool-touch case allows safe and comfortable handling even after the most demanding runs. Supplied with onboard calibration certificate, the logger provides complete traceability to comply with QA standards. • Improved logger design with more memory, battery life and onboard intelligence • New EasyTrack Insight Professional Software option with more operation, analysis & reporting power • New capabilities with multiple runs & SmartPaq PASS/FAIL indicator