Cable printing - Import export

Connectors made by Axon’ Mechatronics are tailor-made. They are designed to be : -assembled to PCBA through different kinds of processes : wave soldering, reflow soldering or solderless solution. -assembled on Flat Flexible Cables or Flat Print Circuits with different processes : soldering, crimping, locking. -terminated to wire by welding or crimping. -assembled by electrical welding

The VST video stroboscope has been designed to continuously monitor the print quality of fast-running cable printing machines. The system also offers the convenience of being able to view the entire print area at various magnifications on a monitor screen. The integrated software allows various evaluations of the displayed print area; e.g. alarm in case of bad quality and / or missing prints. Print monitoring at speeds up to 2500 m/min and above Real-time inspection for bad quality and /or missing prints The device is e.g. synchronized with the gravure printer's stroboscopic signal output (12 pulses per printwheel revolution). A special high-speed camera periodically takes a sequence of 12 consecutive partial print photographs depicting the total print impression printed by the printwheel circumference and outputs them via a 1 Gb/sec Ethernet interface to any computer (not included with the basic VST Video Stroboscope).

B - STROBOSCOPE Automatically synchronized flashing stroboscope for monitoring the quality of printed marks. High quality finish with tight and resistant to sol­vent metal casing. VST - VIDEO SYSTEM FOR MONITORING THE PRINT QUALITY Medek & Schörner also offers a video system for monitoring the print quality of fast-running cable printing machines, e.g. allowing real-time inspection for bad quality and/or missing prints. FM-P - REPLACEABLE INK SUPPLY MODULE With ink tank, pump, cooler, filters, and ink flow fine adjustment and selector valves. Allows the printing ink to be changed in about 2 minutes. Ink can be stored in the ink tank for several weeks with no degradation of ink properties.

Marking system for double-sided offset printing of cable insulation with synchronized, phase-adjustable printing wheels Double-sided indirect gravure printing Indirect printing system Marking speeds up to 100 m / minute Marking cold plastic tubing and hoses as well as plastic insulated cables including products with irregular surfaces STANDARD CONFIGURATION Marking unit with two marking stations. Complete marking station with ink tank, solvent feed unit, printing disc shaft, and rubber faced transfer roll. 1 set jof dedicated ink wipers and guide roller matching the specified printing disc. Complete accessories kit without printing discs.Offset printing machine using laser engraved printing discs and rubber faced transfer rolls. Transfer rolls synchronized and phase-adjustable during operation for ring marking or spiral striping. Easy to set up and operate. Printing discs and transfer rolls driven by product being marked. Available on request with auxiliary drive for marking

High-performance gravure printing machine with turret marking unit for marking hot cable insulation. Ten printing stations Marking of text and numbers Printing speeds up to 1200 m / min Exchangeable ink supply system STANDARD CONFIGURATION Frame with support column and height adjustment crank mechanism. Turret marking unit with precision drive for ten different printing discs. Integrated pneumatic printing disc selector and control electronics with additional input for automatic sequencing via external contact closure. One ink wiping system per printing disc for easy setup and low doctor blade wear. Replaceable, compact ink supply module with ink tank, pump, cooler, filters, and ink flow fine adjustment valve. Complete accessories kit without printing discs. Electronically controlled precision drive for printing disc drive. Ten different marking codes selectable manually or automatically with no loss of marks.

Modern thermal transfer printer for Partex profiles for all needs of wire and cable marking Print Thermal transfer printing: 300 dpi resolution Printing speed: 125 mm/s maximum Text Number of rows: 1 row in Tube-mode 1-4 rows in Tape mode Temperature range Operating temperatur: +10ºC to +35ºC Humidity:30 - 85 % not condensing To obtain the best printing result, the temperature of the profile shouldn’t be lower then +25°C.

LEIBINGER achieves up to 40% higher printing and production speeds with the JET3up RAPID. Products such as cables can be marked with clearly legible characters, even at speeds of 1,000 m/min (60 km/h)! To achieve this high speed, the new inkjet printer has a much higher drop frequency, among other features. The JET3up RAPID also has printheads that are specially designed for high speeds. Three different variants are available that vary by the intended industry and application. The "RAPID Wire" printhead meets the high standards of the wire and cable industry. Thanks to the innovative design in the printhead, cables and wires as well as other long, narrow products can be optimally positioned and marked. The result is cable printing that is even faster and more precise. In addition, the "RAPID Universal" and "RAPID Highspeed" printheads are available for applications in other industries.

PLL is a serie of label sheets in A4 format, with matt surface, primarily for laser printing. Its material is UL-approved adhesive polyester for indoor and outdoor use. The PLL range also includes adhesive, self-laminating and printable wrap-around labels. Its material is UL-approved MT310 transparent polyester. The additional transparent part is wrapped around the cable and laminates the print field and protects the marking against chemicals and wear. Material UL approved polyester with acrylic adhesive UL approved MT310 transparent polyester with adhesive Colours Yellow, silver, white Wrap-around: yellow, white Print Printable in standard laser printers Temperature range Service temperature range: –40°C to +150°C (–40°F to +302°F). Minimum application range: +10°C (+50°F). Storage stability: Two years stored at +21°C (+70°F) and 50% relative humidity (RH). Resistance UL code PGGU2. Excellent resistance to isopropyl alcohol, oil and water.

The JET3up PI is a pigment ink printer primarily used for cables and many other products with dark backgrounds. Data on dark surfaces such as cable must be printed with bright inks. But those present a major challenge for conventional inkjet printers because the pigments in contrast inks settle out. But not with the JET3up PI! The industrial inkjet printer has a unique stirring device that keeps the pigments in motion, thus keeping the ink in the printer always ready for use. This way LEIBINGER guarantees maximum print quality and highest reliability even for the use of pigmented inks. With the automatic nozzle seal "Sealtronic" in the JET3up MI, LEIBINGER can guarantee that the ink does not dry, even after long-term shut-downs. When production stops, the gutter and the nozzle form an airtight circuit: No ink may leak from the circulation and no air can come in. Even after long downtimes LEIBINGER inkjet printers are ready to print within a minute – without cleaning cycles.

Plotter with plates for PARTEX neutral wire, cable, component and terminal markers. Print Printing method: Plotter pens with etching ink Drawing speed: Max 40mm/s (1.57 tum/s) Temperature range Working temperature: +10ºC to +35ºC ( 50ºF to 95ºF) Storage temperature: -10ºC to +50ºC ( 14ºF to 122ºF) Recommended profile temperature: +20°C ( 68ºF) Resistance The products intended for MK500 is tested according to Partex Product Test Programme by the Swedish Test and Research Institute. Mark Type Groups MK500 print on : Wire markers PA+02 PA+1 PA+2 Open wire markers PC-10 PC-20 PC-30 PC-40 Cable markers PK2 POH Component markers PN PS Terminal block marking TX-61 TX-96