Cable chains - Import export

The Cable Chain is a classic piece of jewellery, featuring a series of interlocking oval or round links in a uniform pattern. It's a versatile and popular choice for both men and women.

EasyChains® are available in two versions. In the "E" version the cable is simply laid from the outside, and in the "Z" version from the inside. The shortened installation time is one of the main features of the Easy Chain® chains. Their elastic and rugged material igumid NB offers even more reasons for application: Optimum elasticity, UL94-V2 Classification and excellent suitability for clean rooms. Their one-piece design makes EasyChain® especially attractive in price. Due to the lower rigidity of the material, the EasyChain® is not suitable for applications with very high load. New: Now as ESD option Easy Chain® as ESD Overview for easy chain® advantages Further information Series E03 Inner height hi: 5 mm Inner widths Bi: 5 - 10 mm bending radii R: 10 - 28 mm Pitch: 10 mm E-Chain®, to be filled in the outer radius Series E04 Inner height hi: 7 mm Inner width Bi: 7 mm Bending radii R: 15 - 48 mm Pitch: 16.7 mm E-Chain®, to be filled in the outer radius Series E045 Inner height hi: 9.4 mm Inner width Bi: 16 mm Bending radii R: 18 - 38 mm Pitch: 13 mm E-Chain®, to be filled in the outer radius Series E045.2 Innerheight hi: 9,4 mm inner width Bi: 7+7 mm | 9+9 mm Bending radii R: 18 - 38 mm Pitch; 13 mm E-Chain®, to be filled in the outer radius Series E045.3 Inner height hi: 9,4 mm Inner width Bi: 9+9+9 mm Bending radii R: 18 - 38 mm Pitch: 13 mm E-Chain®, to be filled in the outer radius Series E06 Inner height hi: 10,5 mm Inner widths Bi: 10 - 16 mm bending radii R: 18 - 38 mm Pitch: 20 mm E-Chain®, to be filled in the outer radius Series E065 Inner height hi: 11,3 mm Inner width Bi: 16 mm Bending radii R: 18 - 38 mm Pitch: 15 mm E-Chain®, to be filled in the outer radius Series E065.2 Inner height hi: 11,3 mm Inner width Bi: 9+9 mm Bending radii R: 18 - 38 mm Pitch: 15 mm E-Chain®, to be filled in the outer radius Series E065.3 Inner height hi: 11,3 mm Inner width Bi: 9+9+9 mm Bending radii R: 18 - 38 mm Pitch: 15 mm E-Chain®, to be filled in the outer radius Series E065.4 Inner height hi: 11,3 mm Inner width Bi: 9+9+9+9 mm Bending radii R: 18 - 38 mm Pitch: 15 mm E-Chain®, to be filled in the outer radius Series E08 Inner height hi: 14,6 mm Inner widths Bi: 10 - 50 mm bending radii R: 28 - 48 mm Pitch: 20 mm E-Chain®, to be filled in the outer radius Series E14 Inner height hi: 19 mm Inner widths Bi: 15 - 50 mm bending radii R: 28 - 125 mm Pitch: 30,5 mm E-Chain®, to be filled in the outer radius Series E200 Inner height hi: 24.3 mm Inner width Bi: 57 mm Bending radii R: 55 - 200 mm Pitch: 46 mm E-Chain®, to be filled in the outer radius Series E200.2 Inner height hi: 24.3 mm Inner widths Bi: 37+37/50+50 mm Bending radii R: 55 - 200 mm Pitch: 46 mm E-Chain®, to be filled in the outer radius Series E16 Inner height hi: 32 mm Inner widths Bi: 23 - 100 mm bending radii R: 60 - 100 mm Pitch: 30,5 mm E-Chain®, to be filled in the outer radius Series E26 Inner height hi: 36.5 mm Inner width Bi: 75 mm Bending radii R: 63 - 250 mm Pitch: 56 mm E-Chain®, to be filled in the outer radius Series E26.2 Inner height hi: 37.1 mm Inner width Bi: 48+48 mm Bending radii R: 63 - 250 mm Pitch: 56 mm E-Chain®, to be filled in the outer radius Series E26.3 Inner height hi: 37.1 mm Inner width Bi: 47+48+47 mm Bending radii R: 63 - 250 mm Pitch: 56 mm E-Chain®, to be filled in the outer radius Series E300 Inner height hi: 48,5 mm Inner width Bi: 75 mm Bending radii R: 75 - 300 mm Pitch: 67 mm E-Chain®, to be filled in the outer radius Series E300.2 Inner height hi: 48.5 mm Inner width Bi: 48+48 mm Bending radii R: 75 - 300 mm Pitch: 67 mm E-Chain®, to be filled in the outer radius Series E300.3 Inner height hi: 48.5 mm Inner width Bi: 47+46+47 mm Bending radii R: 75 - 300 mm Pitch: 67 mm E-Chain®, to be filled in the outer radius Series Z045 Inner height hi: 9.4 mm Inner width Bi: 16 mm Bending radii R: 18 - 38 mm Pitch: 13 mm E-Chain®, to be filled in the inner radius Series Z045.2 Inner height hi: 9,4 mm Inner width Bi: 7+7 mm Bending radii R: 18 - 38 mm Pitch: 13 mm E-Chain®, to be filled in the inner radius Series Z06 Inner height hi: 10,5 mm Inner widths Bi: 10 - 16 mm bending radii R: 18 - 38 mm Pitch: 20 mm E-Chain®, to be filled in the inner radius Series Z065.3 Inner height hi: 11.3 mm Inner widths Bi: 9+9+9 mm Bending radii R: 18 - 38 mm Pitch: 15 mm E-Chain®, to be filled in the inner radius Series Z08 Inner height hi: 14,7 mm Inner widths Bi: 10 - 50 mm bending radii R: 28 - 48 mm Pitch: 20 mm E-Chain®, to be filled in the inner radius Series Z14 Inner height hi: 19 mm Inner widths Bi: 15 - 50 mm bending radii R: 28 - 125 mm Pitch: 30,5 mm E-Chain®, to be filled in the inner radius Series Z200 Inner height hi: 24.3 mm Inner width Bi: 57 mm Bending radii R: 55 - 200 mm Pitch: 46 mm E-Chain®, to be filled in the inner radius Series Z200.2 Inner height hi: 24.3 mm Inner widths Bi: 37+37/50+50 mm Bending radii R: 55 - 200 mm Pitch: 46 mm E-Chain®, to be filled in the inner radius Series Z16 Inner height hi: 32 mm Inner widths Bi: 23 - 100 mm bending radii R: 40 - 125 mm Pitch: 30,5 mm E-Chain®, to be filled in the inner radius Series Z26 Inner height hi: 36.5 mm Inner width Bi: 75 mm Bending radii R: 63 - 250 mm Pitch: 56 mm E-Chain®, to be filled in the inner radius Series Z26.2 Inner height hi: 37.1 mm Inner width Bi: 48+48 mm Bending radii R: 63 - 250 mm Pitch: 56 mm E-Chain®, to be filled in the inner radius Series Z26.3 Inner height hi: 37.1 mm Inner width Bi: 47+48+47 mm Bending radii R: 63 - 250 mm Pitch: 56 mm E-Chain®, to be filled in the inner radius Series Z300 Inner height hi: 48,5 mm Inner width Bi: 75 mm Bending radii R: 75 - 300 mm Pitch: 67 mm E-Chain®, to be filled in the inner radius Series Z300.2 Inner height hi: 48.5 mm Inner width Bi: 48+48 mm Bending radii R: 75 - 300 mm Pitch: 67 mm E-Chain®, to be filled in the inner radius Series Z300.3 Inner height hi: 48.5 mm Inner width Bi: 47+46+47 mm Bending radii R: 75 - 300 mm Pitch: 67 mm E-Chain®, to be filled in the inner radius Certificate IPA: standard material ISO Class 2 according to ISO 14644-1, v = 1 m/s UL94-V2 classification Rotary movement possible Easy Chain® with special material igumid ESD as electrically conductive ESD/TEX option available on request EasyChains® are available in two versions. In the "E" version the cable is simply laid from the outside, and in the "Z" version from the inside. The shortened installation time is one of the main features of the Easy Chain® chains. Their elastic and rugged material igumid NB offers even more reasons for application: Optimum elasticity, UL94-V2 Classification and excellent suitability for clean rooms. Their one-piece design makes EasyChain® especially attractive in price. Due to the lower rigidity of the material, the EasyChain® is not suitable for applications with very high load. New: Now as ESD option Easy Chain® as ESD Overview for easy chain® advantages Further information Series E03 Inner height hi: 5 mm Inner widths Bi: 5 - 10 mm bending radii R: 10 - 28 mm Pitch: 10 mm E-Chain®, to be filled in the outer radius Series E04 Inner height hi: 7 mm Inner width Bi: 7 mm Bending radii R: 15 - 48 mm Pitch: 16.7 mm E-Chain®, to be filled in the outer radius Series E045 Inner height hi: 9.4 mm Inner width Bi: 16 mm Bending radii R: 18 - 38 mm Pitch: 13 mm E-Chain®, to be filled in the outer radius Series E045.2 Innerheight hi: 9,4 mm inner width Bi: 7+7 mm | 9+9 mm Bending radii R: 18 - 38 mm Pitch; 13 mm E-Chain®, to be filled in the outer radius Series E045.3 Inner height hi: 9,4 mm Inner width Bi: 9+9+9 mm Bending radii R: 18 - 38 mm Pitch: 13 mm E-Chain®, to be filled in the outer radius Series E06 Inner height hi: 10,5 mm Inner widths Bi: 10 - 16 mm bending radii R: 18 - 38 mm Pitch: 20 mm E-Chain®, to be filled in the outer radius Series E065 Inner height hi: 11,3 mm Inner width Bi: 16 mm Bending radii R: 18 - 38 mm Pitch: 15 mm E-Chain®, to be filled in the outer radius Series E065.2 Inner height hi: 11,3 mm Inner width Bi: 9+9 mm Bending radii R: 18 - 38 mm Pitch: 15 mm E-Chain®, to be filled in the outer radius Series E065.3 Inner height hi: 11,3 mm Inner width Bi: 9+9+9 mm Bending radii R: 18 - 38 mm Pitch: 15 mm E-Chain®, to be filled in the outer radius Series E065.4 Inner height hi: 11,3 mm Inner width Bi: 9+9+9+9 mm Bending radii R: 18 - 38 mm Pitch: 15 mm E-Chain®, to be filled in the outer radius Series E08 Inner height hi: 14,6 mm Inner widths Bi: 10 - 50 mm bending radii R: 28 - 48 mm Pitch: 20 mm E-Chain®, to be filled in the outer radius Series E14 Inner height hi: 19 mm Inner widths Bi: 15 - 50 mm bending radii R: 28 - 125 mm Pitch: 30,5 mm E-Chain®, to be filled in the outer radius Series E200 Inner height hi: 24.3 mm Inner width Bi: 57 mm Bending radii R: 55 - 200 mm Pitch: 46 mm E-Chain®, to be filled in the outer radius Series E200.2 Inner height hi: 24.3 mm Inner widths Bi: 37+37/50+50 mm Bending radii R: 55 - 200 mm Pitch: 46 mm E-Chain®, to be filled in the outer radius Series E16 Inner height hi: 32 mm Inner widths Bi: 23 - 100 mm bending radii R: 60 - 100 mm Pitch: 30,5 mm E-Chain®, to be filled in the outer radius Series E26 Inner height hi: 36.5 mm Inner width Bi: 75 mm Bending radii R: 63 - 250 mm Pitch: 56 mm E-Chain®, to be filled in the outer radius Series E26.2 Inner height hi: 37.1 mm Inner width Bi: 48+48 mm Bending radii R: 63 - 250 mm Pitch: 56 mm E-Chain®, to be filled in the outer radius Series E26.3 Inner height hi: 37.1 mm Inner width Bi: 47+48+47 mm Bending radii R: 63 - 250 mm Pitch: 56 mm E-Chain®, to be filled in the outer radius Series E300 Inner height hi: 48,5 mm Inner width Bi: 75 mm Bending radii R: 75 - 300 mm Pitch: 67 mm E-Chain®, to be filled in the outer radius Series E300.2 Inner height hi: 48.5 mm Inner width Bi: 48+48 mm Bending radii R: 75 - 300 mm Pitch: 67 mm E-Chain®, to be filled in the outer radius Series E300.3 Inner height hi: 48.5 mm Inner width Bi: 47+46+47 mm Bending radii R: 75 - 300 mm Pitch: 67 mm E-Chain®, to be filled in the outer radius Series Z045 Inner height hi: 9.4 mm Inner width Bi: 16 mm Bending radii R: 18 - 38 mm Pitch: 13 mm E-Chain®, to be filled in the inner radius Series Z045.2 Inner height hi: 9,4 mm Inner width Bi: 7+7 mm Bending radii R: 18 - 38 mm Pitch: 13 mm E-Chain®, to be filled in the inner radius Series Z06 Inner height hi: 10,5 mm Inner widths Bi: 10 - 16 mm bending radii R: 18 - 38 mm Pitch: 20 mm E-Chain®, to be filled in the inner radius Series Z065.3 Inner height hi: 11.3 mm Inner widths Bi: 9+9+9 mm Bending radii R: 18 - 38 mm Pitch: 15 mm E-Chain®, to be filled in the inner radius Series Z08 Inner height hi: 14,7 mm Inner widths Bi: 10 - 50 mm bending radii R: 28 - 48 mm Pitch: 20 mm E-Chain®, to be filled in the inner radius Series Z14 Inner height hi: 19 mm Inner widths Bi: 15 - 50 mm bending radii R: 28 - 125 mm Pitch: 30,5 mm E-Chain®, to be filled in the inner radius Series Z200 Inner height hi: 24.3 mm Inner width Bi: 57 mm Bending radii R: 55 - 200 mm Pitch: 46 mm E-Chain®, to be filled in the inner radius Series Z200.2 Inner height hi: 24.3 mm Inner widths Bi: 37+37/50+50 mm Bending radii R: 55 - 200 mm Pitch: 46 mm E-Chain®, to be filled in the inner radius Series Z16 Inner height hi: 32 mm Inner widths Bi: 23 - 100 mm bending radii R: 40 - 125 mm Pitch: 30,5 mm E-Chain®, to be filled in the inner radius Series Z26 Inner height hi: 36.5 mm Inner width Bi: 75 mm Bending radii R: 63 - 250 mm Pitch: 56 mm E-Chain®, to be filled in the inner radius Series Z26.2 Inner height hi: 37.1 mm Inner width Bi: 48+48 mm Bending radii R: 63 - 250 mm Pitch: 56 mm E-Chain®, to be filled in the inner radius Series Z26.3 Inner height hi: 37.1 mm Inner width Bi: 47+48+47 mm Bending radii R: 63 - 250 mm Pitch: 56 mm E-Chain®, to be filled in the inner radius Series Z300 Inner height hi: 48,5 mm Inner width Bi: 75 mm Bending radii R: 75 - 300 mm Pitch: 67 mm E-Chain®, to be filled in the inner radius Series Z300.2 Inner height hi: 48.5 mm Inner width Bi: 48+48 mm Bending radii R: 75 - 300 mm Pitch: 67 mm E-Chain®, to be filled in the inner radius Series Z300.3 Inner height hi: 48.5 mm Inner width Bi: 47+46+47 mm Bending radii R: 75 - 300 mm Pitch: 67 mm E-Chain®, to be filled in the inner radius E-Chain® selection aids You can find the right E-Chain® quickly by entering concrete parameters and with the aid of a comparison table. Selection aids Installation instructions Joining, separating and filling of the Easy Chain®. Assembly Instructions Application examples Applications in various industrial sectors and in the igus® test laboratory. Easy Chain® Easy Chain: "E" and "Z" makes it "Easy" Easily fillable from the inside (Z version) and outside (E version) Quicker filling, access to cables without opening or closing of the lids Can be put together or taken apart at "any point" Cost-effective, one-piece chain Dirt-proof outer contour Mounting brackets with integrated strain relief available Limited torsional movement possible Available with interior separation (many types) Flammability class UL94-V2 Suitable for clean room applications Typical industrial sectors and applications General machinery Clean room application Electronic equipment Office furniture Vending machines Packaging machines Certificate IPA: standard material ISO Class 2 according to ISO 14644-1, v = 1 m/s UL94-V2 classification Rotary movement possible Easy Chain® with special material igumid ESD as electrically conductive ESD/TEX option available on request

Save 88% assembly time with cost-effective energy chain for intralogistics and crane systems. The igus autoglide 5 system transfers energy, data, fluids, and air safely in a single system, requires almost no maintenance, and is also very cost-effective, including a 2400.07AG.075.0 e-chain, steel cable guide, harnessed bus cable, and five single cores of 6mm² each.

Overview for triflex® advantages Other information triflex® RSP Continuously adjustable retraction force triflex® RSP triflex® RSE Infinitely adjustable retraction force for small robots triflex® RSE Triflex® R-Set Universal module for all motions on the robot Triflex® R-Set Fiber rod modules Intelligent problem solution through directed pretension. Fiber rod modules Universal assembly kit Offers the potential to mount the fiber rod module in the desired position on the robotic arm. Universal assembly kit Strain reliefs for large cross sections Secure mounting also in the use of cables with large cross section. Strain reliefs Gliding feed-through Available with and without swivel bearing Gliding feed-through Protectors Well protected in extreme applications. Protectors Heat shield Protection against weld and metal spills up to 600°C Heat shield CF Robot special cables Special cables for long service life in robotic applications. CF Robot special cables iF-Design Award for "TRC"- and "TRL"-Design Cleanroom environments on request Series TRC electrically conductive ESD/TEX versions possible UL94-V2classification Overview for triflex® advantages Other information Application examples Interesting applications from a variety of industrial sectors Triflex® R Configure interior separation Define cables, select chain and configure interior separation. Now also for all Triflex® R series! Internal separation configurator Triflex® R QuickRobot Equipment support for various types of robots. Simplified ordering of complete systems. QuickRobot TRC.30 Inner height Bi 1: 12 mm Inner height Bi 2: 10 mm Bending radius R: 50 mm Pitch: 11.3 mm e-chain® TRC.40 Inner height Bi 1: 15 mm Inner height Bi 2: 13 mm Bending radius R: 58 mm Pitch: 13,9 mm e-chain® Installation instructions Instructions for the joining and separating of the triflex® R - TRC. Assembly Instructions TRC.60 Inner height Bi 1: 22,5 mm Inner height Bi 2: 19,5 mm Bending radius R: 87 mm Pitch: 20,4 mm e-chain® TRC.70 Inner height Bi 1: 28 mm Inner height Bi 2: 24 mm Bending radius R: 110 mm Pitch: 25,6 mm e-chain® TRC.85 Inner height Bi 1: 33 mm Inner height Bi 2: 28 mm Bending radius R: 135 mm Pitch: 30,6 mm e-chain® TRC.100 Inner height Bi 1: 37.5 mm Inner height Bi 2: 32.5 mm Bending radius R: 145 mm Pitch: 34.5 mm e-chain® TRC.125 Inner height Bi 1: 43,3 mm Inner height Bi 2: 43,3 mm Bending radius R: 182 mm Pitch: 44,6 mm e-chain® Standard mounting bracket for TRC / TRE / TRL. Also possible with strain reliefs and as intermediate connection. Standard mounting brackets Light mounting bracket Standard for the TRL version. Also compatible with TRC / TRE; possible with strain reliefs and as intermediate connection. Light mounting bracket TRCF.85 Inner height Bi 1: 30 mm Bending radius R: 135 mm Pitch: 30.6 mm e-chain® TRCF.100 Inner height Bi 1: 37,5 mm Bending radius R: 145 mm Pitch: 34,5 mm e-chain® Standard mounting bracket for TRC / TRE / TRL. Also possible with strain reliefs and as intermediate connection. Standard mounting brackets Light mounting bracket Standard for the TRL version. Also compatible with TRC / TRE; possible with strain reliefs and as intermediate connection. Light mounting bracket TRE.30 Inner height Bi 1: 12 mm Inner height Bi 2: 10 mm Bending radius R: 50 mm Pitch: 11,3 mm e-chain® TRE.40 Inner height Bi 1: 15 mm Inner height Bi 2: 13 mm Bending radius R: 58 mm Pitch: 13,9 mm e-chain® Installation instructions Instructions for the joining, separating and filling of the triflex® R - TRE. Assembly Instructions TRE.60 Inner height Bi 1: 22,5 mm Inner height Bi 2: 19,5 mm Bending radius R: 87 mm Pitch: 20,4 mm e-chain® TRE.70 Inner height Bi 1: 28 mm Inner height Bi 2: 24 mm Bending radius R: 110 mm Pitch: 25,6 mm e-chain®. TRE.85 Inner height Bi 1: 33 mm Inner height Bi 2: 28 mm Bending radius R: 135 mm Pitch: 30,6 mm e-chain® TRE.100 Inner height Bi 1: 37,5 mm Inner height Bi 2: 32,5 mm Bending radius R: 145 mm Pitch: 34,5 mm e-chain® TRE.125 Inner height Bi 1: 43,3 mm Inner height Bi 2: 43,3 mm Bending radius R: 182 mm Pitch: 44,6 mm e-chain® Standard mounting brackets for TRC / TRE / TRL. Also possible with strain reliefs and as intermediate connection. Standard mounting brackets Light mounting bracket Standard for the TRL version. Also compatible with TRC / TRE; possible with strain reliefs and as intermediate connection. Light mounting bracket TRE.40.B Inner height Bi 1: 15 mm Inner height Bi 2: 13 mm Bending radius R: 58 mm Pitch: 13.9 mm e-chain® TRE.60.B Inner height Bi 1: 22,5 mm Inner height Bi 2: 19,5 mm Bending radius R: 87 mm Pitch: 20,4 mm e-chain® Assembly instruction Instructions for the joining, separating and filling of the Triflex® R - TRE-B version. Assembly instruction TRE.70.B Inner height Bi 1: 28 mm Inner height Bi 2: 24 mm Bending radius R: 110 mm Pitch: 25,6 mm e-chain® TRE.85.B Inner height Bi 1: 33 mm Inner height Bi 2: 28 mm Bending radius R: 135 mm Pitch: 30,6 mm e-chain® TRE.100.B Inner height Bi 1: 37,5 mm Inner height Bi 2: 32,5 mm Bending radius R: 145 mm Pitch: 34,5 mm e-chain® Standard mounting brackets for TRC / TRE / TRL. Also possible with strain reliefs and as intermediate connection. Standard mounting brackets Light mounting bracket Standard for the TRL version. Also compatible with TRC / TRE; possible with strain reliefs and as intermediate connection. Light mounting bracket Assembly tool triflex® R B-version Assembly tool for disassembly of triflex® R B-version Assembly tool triflex® R B-version TRL.30 Inner height Bi 1: 12 mm Inner height Bi 2: 10 mm bending radii R: 50 mm Pitch: 11,3 mm e-chain® TRL.40 Inner height Bi 1: 15 mm Bending radius R: 58 mm Pitch: 13.9 mm e-chain® Installation instructions Instructions for the joining, separating and filling of the Triflex® R - TRL. Assembly Instructions TRL.60 Inner height Bi 1: 23 mm. Bending radius R: 87 mm. Pitch: 20.4 mm e-chain® TRL.70 Inner height Bi 1: 28 mm Bending radius R: 110 mm Pitch: 25.6 mm e-chain® TRL.100 Inner height Bi 1: 38 mm Bending radius R: 145 mm Pitch: 34.5 mm e-chain® Standard mounting brackets for TRC / TRE / TRL. Also possible with strain reliefs and as intermediate connection. Standard mounting brackets Light mounting bracket Standard for the TRL version. Also compatible with TRC / TRE; possible with strain reliefs and as intermediate connection. Light mounting bracket TRLF. 65 Inner height Bi 1: 24.4 mm Bending radius R: 100 mm Pitch: 23.1 mm e-chain® TRLF. 85 Inner height Bi 1: 32.8 mm Bending radius R: 135 mm Pitch: 31 mm e-chain® Assembly instruction Instructions for the joining, separating and filling of the Triflex® R - TRLF. Assembly instruction TRLF. 100 Inner height Bi 1: 38 mm Bending radius R: 145 mm Pitch: 34,5 mm e-chain® Standard mounting brackets for TRC / TRE / TRL. Also possible with strain reliefs and as intermediate connection. Standard mounting brackets Light mounting bracket Standard for the TRL version. Also compatible with TRC / TRE; possible with strain reliefs and as intermediate connection. Light mounting bracket triflex® RSP Continuously adjustable retraction force triflex® RSP triflex® RSE Infinitely adjustable retraction force for small robots triflex® RSE Triflex® R-Set Universal module for all motions on the robot Triflex® R-Set Fiber rod modules Intelligent problem solution through directed pretension. Fiber rod modules Universal assembly kit Offers the potential to mount the fiber rod module in the desired position on the robotic arm. Universal assembly kit Strain reliefs for large cross sections Secure mounting also in the use of cables with large cross section. Strain reliefs Gliding feed-through Available with and without swivel bearing Gliding feed-through Protectors Well protected in extreme applications. Protectors Heat shield Protection against weld and metal spills up to 600°C Heat shield CF Robot special cables Special cables for long service life in robotic applications. CF Robot special cables This system is especially suited for: First choice for multi-axis industrial robots Three versions are available: TRC: closed design; TRE: "Easy" design, very easy to fill in from outside; and TRL: the "Light" version, likewise with "easy" design Universally applicable in general mechanical engineering Secure energy supply system Multi-axis (3D movements) High torsional stability Can be shortened and lengthened as required due to the individual elements Large filling space Doesn't get stuck in the interfering edges Small bending radius Simple cable routing for three-dimensional applications with ball-and-socket system for absorption of high tensile strength Cables easy to install and replace (TRE/TRL version) Fiber rod module for partial reinforcement and to give direction TRL - One-piece element, extremely light High tensile strength without additional elements like steel cables, spring elements, etc. Typical industrial sectors and applications First choice for industrial robots Machine tools Handling equipment 6-axis Material handling system General mechanical engineering iF-Design Award for "TRC"- and "TRL"-Design Cleanroom environments on request Series TRC electrically conductive ESD/TEX versions possible UL94-V2classification

The troubleshooter for energy supply systems in the chip area - available in 4 sizes. Chips and dirt can affect the service life of cables and hoses significantly. With the RX system, igus® offers an extremely tight plastic e-tube that is nonetheless very easy to open. Snap-open in the outer radius A smooth, curved outer contour prevents chips from sticking Injection-molded "sealing lips" all around No holes, cracks, undercuts Series RX40 is IP40 tested (TÜV Saarland) Interior separation and guide trough available Covered pin/hole connection and stops "RBR" version with bending radius on both sides available Typical branches of industry Machine tools All applications in the direct chip sector Applications exposed to dust and dirt General mechanical engineering Dimensions and technical datas RX e-tubes RX32 Inner height hi: 42 mm Inner widths Bi: 80mm Bending radii R: 80 - 250 mm Pitch: 32 mm RX E-Tube RX40 Inner height hi: 52 mm Inner widths Bi: 100 mm bending radii R: 100 - 300 mm Pitch: 40 mm RX E-Tube RX48 Inner height hi: 62 mm Inner widths Bi: 120mm Bending radii R: 120 - 325 mm Pitch: 48 mm RX E-Tube RX56 Inner height hi: 73 mm Inner widths Bi: 140mm Bending radii R: 140 - 350 mm Pitch: 56 mm RX E-Tube RX56 High-temperature plastic version of the chip-proof RX energy tubes from stock - 850°C from 24h RX - from stock against hot chips red dot 2011: honourable mention for RX40 iF-Design-Award for RX e-tubes ESD classification: Electrically conductive ESD/Atex versions on request UL94-V0 classification on request e-tubes available as special design with HT material for 850°C hot chips The troubleshooter for energy supply systems in the chip area - available in 4 sizes. Chips and dirt can affect the service life of cables and hoses significantly. With the RX system, igus® offers an extremely tight plastic e-tube that is nonetheless very easy to open. Snap-open in the outer radius A smooth, curved outer contour prevents chips from sticking Injection-molded "sealing lips" all around No holes, cracks, undercuts Series RX40 is IP40 tested (TÜV Saarland) Interior separation and guide trough available Covered pin/hole connection and stops "RBR" version with bending radius on both sides available Typical branches of industry Machine tools All applications in the direct chip sector Applications exposed to dust and dirt General mechanical engineering Dimensions and technical datas RX e-tubes Chip tests in the igus® laboratory demonstrate the tremendous chip-proof properties of the igus® RX tube. Chip-proof - for all types of chips and applications RX32 Inner height hi: 42 mm Inner widths Bi: 80mm Bending radii R: 80 - 250 mm Pitch: 32 mm RX E-Tube RX40 Inner height hi: 52 mm Inner widths Bi: 100 mm bending radii R: 100 - 300 mm Pitch: 40 mm RX E-Tube RX48 Inner height hi: 62 mm Inner widths Bi: 120mm Bending radii R: 120 - 325 mm Pitch: 48 mm RX E-Tube RX56 Inner height hi: 73 mm Inner widths Bi: 140mm Bending radii R: 140 - 350 mm Pitch: 56 mm RX E-Tube RX56 High-temperature plastic version of the chip-proof RX energy tubes from stock - 850°C from 24h RX - from stock against hot chips Submersion test in water - Various tube types were submerged under water. The new RX tube needs over 30 seconds until it is filled up, thus proving its high leak tightness Y = time in seconds A = igus® products B = competitor Chip penetration test - Various types of tube were exposed to a defined quantity of chips. In the new RX tube, after 80,000 cycles only 0.2 g of chips were found in the interior Y = chip mass [g] A = igus® RX e-tube RX40.100.100 251.900 cycles B = igus® e-tubes 68.10.100.0 256.132 cycles C = test tube 01 250.907 cycles D = test tube 02* 2.600 cycles *Teststop after 2.600 cycles E = igus® products F = competitor E-Chain® selection aids You can find the right E-Chain® quickly by entering concrete parameters and with the aid of a comparison table. Productfinder Assembly instruction Dismantling / assembling a cover, replacing a chain link and assembling / inserting the RX tube. Assembly instruction Configure interior separation Define cables, select chain and configure interior separation. Now also for RX tubes! Interior separation configurator Application examples Applications in various industrial sectors. RX tubes Series RX - new chip-proof design, small pitch, removable cover 1 Chip-proof design without undercuts and edges 2 Excentric locking 3 Material igumid G 4 rounded shape 5 covered pin/hole connection RX tubes IP tested Technical report TÜV NORD red dot 2011: honourable mention for RX40 iF-Design-Award for RX e-tubes ESD classification: Electrically conductive ESD/Atex versions on request UL94-V0 classification on request e-tubes available as special design with HT material for 850°C hot chips

readycable® harnessed cables are ready-to-connect cables for use in energy chains®. As manufacturer and harnesser, igus® provides everything from a single source, thus reducing throughput times and the number of suppliers. The portfolio includes an extensive range of catalogue products, including cables harnessed according to manufacturers' standards and diverse industrial standards as well as individual singly or series produced components. Numerous types of cable of different qualities, with different approvals and with different certifications of conformity are available to choose from. All components are subjected to extensive quality checks and functional tests.

PMA cable protection systems are used wherever the mechanical protection of electrical lines and cables is needed. Highly flexible cable protection tubes are specifically suited for the additional protection of cable guides in e-chain® systems. Due to the combination of technical knowhow and the strictest international safety guidelines, PMA fulfils the worldwide requirements of industrial markets in application areas like mechanical engineering, automotive construction, fiber optics, solar systems as well as applications in the robot sector with high speeds and millions of alternate bending cycles.

chainflex® robot cables are used in energy chains or 3D applications. The twistable robot cables meet extremely high industrial stress requirements and score points with properties such as resistance to hydrolysis and microbes, UV resistance and many, many others. Different types of robot cable are available, e.g. hybrid cables, fibre optic cables (FOCs), motor cables and servo cables. Typical application areas: - For heavy duty applications - Almost unlimited resistance to oil - Indoor and outdoor applications with average solar radiation - Unsupported travel distances and up to 100 m for gliding applications - Machining centres / machine tools, storage and retrieval systems, packaging industry, handling, refrigerating

- Low-maintenance system for travel up to 100 m - Other sizes and versions available, travel up to 200 m and more with E2 roller e-chains® - Protection against weather and dirt exposure - Cost-effective and fully enclosed complete solution - Standardized and modular design - Simple wall assembly or optional floor mounting - Cable lengths up to 50% shorter than festooning, low-profile installation and no cable junction - Cables are at all times guided with a defined bending radius, and tensile forces are absorbed by the e-chain® - Cables cannot hook, jam, or tear - No slip ring contacts (as is the case on motor drums) -Cables or hoses can easily be retrofitted at any time Reduce electricity costs - direct drive due to scraper, no additional drives needed (as is the case on motor drums) Scraper arm (e.g. as mechanical connection to the scraper carriage) optionally available - we document the situation on-site and will propose a customised solution

Cable Cutters Wire Rope Cutters Rebar Cutters Steel Cutters Chain Cutters Chain Blasters Cutter for Wire of Prestressed Concrete Flat Bar Cutters Thread Cutters Nut Splitters Nibblers for Sheet Metal Cable Stripping Tools Sheat Peeling Tools

When lifting machinery components, there are always edges and surfaces which are insufficiently protected by regular edgeprotectors and protective sleeves. Textile load lifting accessories cannot always be used, as the cables or chains being used press against the load with extreme pressure. Damage to the often expensive and highlymachined components is often unavoidable and the edges must be reworked at great cost. The secuPad is DIN A4 size and can easily be placed at critical locations by hand. It consists of multiple textile layers joined together on every side. It adapts flexibly even to difficult contours. The surface is coated in Powerflex and protected against abrasion and the penetration of shavings and lubricants.

Economical and durable A perfect combination Excellent handling, as the loops of the wear strap are extremely flat and can be easily inserted under the load. The rigid wear strap can be easily pushed even through narrow gaps. Improved efficiency, as the crane does not have to be lowered as far. Experience has shown, lifting processes have been significantly improved. Extra light, as the textile material of the sling offers a clear weight advantage over steel cables or chains. Economical, as only the lowcost wear strap has to be replaced! Durable, as the loop of the wear strap is coated and is therefore protected against wear.

The Load cell model 8451 has been developed for measuring the forces that occur during press operation. The internal measuring elements have a rugged design, which mean they can cope reliably with the steep force curves that are typical of press applications. They can be fitted or replaced quickly and easily on the press ram without the need for additional components around them. The force sensor is placed between the tool and the press ram and can thus measure the actual compression force directly in the axis of operation. The load cell measures the compression forces between the circular contact surfaces of plunger and tool. The pin on its top side and hole on its lower face are simply provided for mechanical fixing and centering the components correctly. The connecting cables are suitable for drag chains, designed for many movements and stably fastened in the sensor housing.

The 8524 precision tension & compression load cell is a versatile sensor for highly accurate load measurements in diverse applications. Optimum measurement quality is achieved with the load cell mounted on a flat, hard and polished contact surface. This requirement does not apply to small measurement ranges of up to 0 ... 2 kN because three knife-edge bearings ensure that the sensor is seated securely. Our brochure „Load Cells“ explains how you can design parasitic loads out of your mechanical system. Through-holes in the outer flange are used for fastening the 8524 sensor to the system structure. The load is applied via the central blind threaded hole or optionally via a load button. Alternatively, a pull plate and even rod end bearings, if desired, can be attached to the sensor for equally easy measurement of purely tensile loads, for instance in Bowden cables or chains. The 8524 sensor is designed to measure static, quasi-static and dynamic compressive and/or tensile loads.

This, related to its measuring range, miniaturized load cell enables an universal and reliable operation in industries and laboratories. It is well suited for compression measurements in very restricted structures. The load cell is a compact construction and made of superrefined steel. Therefore it can be used in many fields of industry, like. Examples are: — Press-in force measurements on longitudinal and transversal connections — Compression force measurements on punch and roller applicancy — Spring tension measurements on shock absorbers for cars — Contact pressure determination in push rods — Compression force measurements on compressed-air knee-lever presses Thanks to the rounded top, in shape of a little hat, the force to be measured is led into the sensor centrically and free of lateral force. Specific characteristics: Very small dimensions Drug chain qualified cable Made of stainless steel burster TEDS optionally available

The tension and compression load cell model 8435 enables universal and fast installation, requires hardly any installation space and upgrades with technical data that are readily achieved by larger sensors. Due to its excellent price-performance ratio with regard to its mechanical and electrical data, the force sensor finds its place in products that are also manufactured in larger quantities and calculated with a small budget. This model of load cell uses proven strain gage technology to perform measurements. Strain gages are applied to the sensitive element and connected to form a full bridge. FEATURES Measuring ranges from 0 ... 200 N up to 0 ... 5000 N Small dimensions Inexpensive execution Stable anti-kink protection Made of high quality stainless steel Connecting cable suitable for drag chains burster TEDS optionally available

Universally applicable Largely biodegradable Silicone-free CO2 propellant Water-displacing Provides a protective coating Saltwater-resistant Super Lube is suitable for many materials and material compounds, such as iron, wood, non-ferrous metals, synthetics, leather, etc. Get your car ready in time for winter: Super Lube prevents car locks and doors from freezing. Super Lube – 17 products in one can: Aluminium cleaner and care product, greaser and lubricant for antennae, interior room spray, adhesive lubricant, high pressure lubricant, fan belt spray, contact and electro protection agent, assembly compound, MOS-2 lubricating and dissolving spray, rust and dirt remover, acid-resistant lubricant and terminal grease, locks and cylinder locks lubricant and line grease lubricant with PTFE, silicone spray, white greases and compounds, chain spray, Bowden cable spray. Fields of application The automotive industry, construction machinery, agricultural...

Highly adhesive lubrication of moving parts, e.g. valve spindles, piston rods, wire cables, drag cables, drive and conveyor chains, hinges and guides, at highly corrosive conditions in food processing technology Temporary corrosion protection of ferrous and non-ferrous metals, in particular in highly corrosive atmospheres, such as industrial atmospheres, outdoor weathering under roofs of semi-finished products and finished products Shipping protection of packed and unpacked machines and machine parts, apparatuses and equipment goods under extreme climatic conditions Advantages and benefits Highly adhesive oil with very good creep and lubrication properties Optimal corrosion protection through high effectiveness of the corrosion protection additive After the solvent has dried, forms a transparent, highly adhesive oil film Contains non-ferrous metal deactivator NSF H1-registered Also available as spray version OKS 3601

This low cost tension/compression load cell is an especially robust component, which can be easily integrated in a girder assembly between two cables or chains for measuring force. The standard model comes with internal thread, allowing any adapter parts, for instance eye brackets, to be fitted in the axis of symmetry. Alternatively, the optionally available adapters with external thread can be used for quick and easy screw-fitting into a threaded hole made for the purpose. The radial connection cable is extremely flexible and designed for a wide range of motion. In order to achieve the greatest possible stability for such a small sensor, making it suitable not only for the laboratory but also for industrial use, all parts have been welded together including the cable guide bush in the sensor housing. burster TEDS with an electronic sensor datasheet or standardization of the output signal in the sensor connecting cable are offered as options

For vertical connecting wire, chain, cable or other fastening supports to concrete or structural steel base materials. DH32: Asma Tavan Klipsi 32mm

D.76 tank cap with key for gasoline, diesel or biodiesel, hydraulic oil and lubricating oil, in technopolymer and steel material, with internal bayonet coupling passage diameter 40 mm and different types of sealing gasket It is available hermetic or ventilated. We can propose this product in a wide range of colors and equipped with safety chains or cables or lock protection door We supply this cap with variable or fixed code key or with the universal fixed code key 455. This product shall be sold with our bayonet filling systems passage 40 mm or with our niches for connection to flexible fuel hose passage Ø 60 mm or with our complete filling systems. The D.76 tank cap with key is used for different applications in several industrial fields, such as generating sets, soundproofed canopy gensets, container, lighting towers, earth moving machines, wheel excavators, auxiliary tanks and so on. Product resulted suitable to approval tests according to the International Standards.

ASM.CF tank cap, 2” female threaded, in aluminium material, complete of different types of sealing gasket in relation to the fluid in the tank. It is available hermetic or ventilated or equipped with a controlled ventilation system through valves. For the optimal operation of the endothermic engine or in case it is required by law or specific regulations, the ASM.CF tank cap can be equipped with unidirectional valves, that allow both the expulsion of vapors generated by fuel and the air inlet into the tank; moreover, in case of tank overturning, the loss of fuel is limited by the valves of controlled ventilation system. The ASM.CF fuel plug can be equipped with a removable filter and/or safety chain or cable. This product particularly lends itself to customizations with writings, company logos and drawings.

D.40 G 1.1/2″ tank cap, male threaded, in plastic and steel material, with different types of sealing gasket in relation to the fluid in the tank. It is available hermetic or ventilated and it can be proposed in 4 colors (black, blue, red, green) for various needs in different sectors; it can also be equipped with removable filter and/or safety chain or cable. This product is customizable with company logos, writings and drawings. We manufacture types with all metal components in stainless steel for nautical applications and corrosive environments. D.40 G 1.1/2″ filling plug is also used in hydraulic field, such as on hydraulic power units. For a perfect match, we suggest to combine our threaded cap with our G 1”.1/2 female threaded filler neck. The adoption of accurate production processes performed with latest generation CNC numerical control machines and the use of selected raw materials, are the first guarantee of quality and reliability over time of our product.

IGP threaded tank cap in stainless steel and plastic material, complete of sealing gasket. Different threads are available: 1” 1/2 male (standard thread; for a perfect match, we suggest to combine our threaded cap with our G 1″.1/2 female threaded filling systems) P3 female (non-standard thread, compatible with our P3 filling system). It is available hermetic, ventilated or equipped with controlled ventilation system through valves. For the optimal operation of the endothermic engine or in case it is required by law or specific regulations, the IGP tank cap can be equipped with unidirectional valves, that allow both the expulsion of vapors generated by fuel and the air inlet into the tank; moreover, in case of tank overturning, the loss of fuel is limited by the valves of controlled ventilation system. IGP threaded fuel plug can be provided with removable filter and/or safety chain or cable; it can also be customized with company logos, writings and drawings.

D.80 fuel tank cap with key, in plastic and aluminium material, ventilated, with internal bayonet coupling, passage diameter 80 mm with sealing gasket. This product is equipped with lock protection door to protect it from dust, debris residues and rainwater and, at request, we can supply this cap also with fixed code key and with safety chains or cables. The D.80 fuel tank cap with key shall be sold with our bayonet filling systems passage 80 mm and it is used for different applications in several industrial fields, such as tank of generating sets, truck, building and agriculture machines, earth moving machines, and so on. We guarantee always quality and reliability of our product. We perform several strength and durability tests and test for product quality control during the various processing phases. On request we can issue the relevant certificates in compliance with national and CE regulations.

D.80 tank cap in galvanised steel, with internal bayonet coupling passage diameter 80 mm, with sealing gasket. It is available ventilated and equipped with safety chains or cables. The D.80 fuel tank cap shall be sold with our bayonet filling systems passage 80 mm and it is used for different applications in several industrial fields, such as tank of generating sets, truck, building and agriculture machines, earth moving machines, and so on. We guarantee always quality and reliability of our product. We perform several strength and durability tests and test for product quality control during the various processing phases. On request we can issue the relevant certificates in compliance with national and CE regulations.

D.60.TE fuel tank cap with key, in plastic material, hermetic, with internal bayonet coupling, passage diameter 60 mm with sealing gasket. This product is equipped with lock protection door with “DIESEL” writing, to protect it from dust, debris residues and rainwater. At your request, we can supply it equipped with safety chains or cables. This product shall be sold with our bayonet filling systems passage 60 mm. The D.60.TE tank cap with key is mainly used in truck tanks, on agricultural and construction equipment, and in power generator tanks. We guarantee always quality and reliability of our product.

D.60 BC steel fuel tank cap with key for gasoline, diesel or biodiesel, ventilated, with internal bayonet coupling, passage diameter 60 mm with sealing gasket. At your request, we can supply it equipped with safety chains or cables. This product shall be sold with our niche series 70 for connection to flexible fuel hose passage Ø 70 mm or with bayonet filling systems passage 60 mm which can be possibly provided with anti-syphon device or removible filters. Thanks to its feature and its ergonomic design, the D.60 BC cap with key is used for different applications in several industrial fields, such as tank of generating sets, truck, building and agriculture.machines , earth moving machines, and so on. We guarantee always quality and reliability of our product.

D.60 steel fuel tank cap for gasoline, diesel or biodiesel, internal bayonet coupling passage diameter 60 mm, with sealing gasket. It is available hermetic or ventilated and, at your request, we can supply it in different colors for various needs in the fields of use and it can be equipped with safety chains or cables. This product shall be sold with our niche series 70 for connection to flexible fuel hose passage Ø 70 mm or with bayonet filling systems passage 60 mm, which can be possibly provided with anti-syphon device or removable filters. Thanks to its feature and its ergonomic design, the D.60 cap with key is widely used on tanks of trucks, on building and agricultural machines, on earth moving machines, on generating sets tanks and so on. We aways guarantee quality and reliability of our product. We perform several strength and durability tests and tests for product quality control during the various processing phases.