Buttons reset - Import export

Reset button M / RESET. Stick min. 25mm - max. 125mm

RESET button ER Stick min.25mm - max.125.

Display unit EH 5994, EH 5995 • Exchangable front label for individual legending • As option galvanic separated RS458 bus • Protection degree for front side IP 64 • Enclosure for flush mounting 96 x 96 mm • Display unit EH 5994: - 8 fault signal LEDs on the unit - Reset buttons for audible alarm, common alarm and alarm signal • Display unit EH 5995: - 8 fault signal LEDs on the unit - Without reset buttons

Mains-independent alarm unit for signalling a fault. Product features Powered by integrated 1.8 Ah 12 V battery in the event of a power failure Optical and acoustic alarm issued via external alarm AM 14 Additional optical display of alarm message using LED in the alarm unit Signalling through potential-free output Reset button for acknowledging fault message

New- / First- /Common Signal Annunciator RP 5994, RP 5995 • Fast localisation of failures and their causes • Reduction of standstill times in production • Adjustable operating modes: New- / First signal annunciator according to DIN 19 235, common alarm annunciator manual reset / auto reset settable • Expandable from 8 to 88 fault signals • Open or closed circuit operation settable • Adjustable on delay for input signals 0 to 10 sec • Reset buttons for audible alarm and common alarm on front side • Connection for external reset of audible alarm, common alarm and single alarm according to setting • Galvanic separation to bus RS485 (optional) • Accessories: buzzer RK 8832, display unit EH 5994, EH 5995 text display unit EH 5996, GMS-module RP 5810 • Width: 70 mm Base module RP 5994: - 8 fault signal inputs with indicator LED on the unit - One relay output each for audible alarm and common alarm - Reset buttons for audible alarm, common alarm, and single alarm - Connection of remote...

• According to IEC/EN 62 020 • for AC and pulsating DC currants Type A to IEC/TR 60755 • 9 tripping values from 10 mA to 10 A or from 10 mA ... 30 A • Frequency range 20 ... 2000 Hz • Selection of manual or automatic reset • With prewarning • With test and reset button • Broken wire detection • Short reaction time • With adjustable delay tv • De-energized on trip • LED indication for auxiliary supply and state of contact • 2 x 1 changeover contact • With sealable cover • Devices available in 3 enclosure versions: IR 5882: 63 mm deep with terminals near to the bottom to be mounted in consumer units or industrial distribution systems according to DIN 43 88 - width 105 mm - with internal residual current transformer

• According to IEC/EN 62 020 • for AC and pulsating DC currants Type A to IEC/TR 60755 • 9 tripping values from 10 mA to 10 A or from 10 mA ... 30 A • Frequency range 20 ... 2000 Hz • Selection of manual or automatic reset • With prewarning • With test and reset button • Broken wire detection • Short reaction time • With adjustable delay tv • De-energized on trip • LED indication for auxiliary supply and state of contact • 2 x 1 changeover contact • With sealable cover • Devices available in 3 enclosure versions: SL 5882: 100 mm deep with terminals near to the top to be mounted in cabinets with mounting plate and cable ducts - width 35 mm - for connection of external residual current transformer, e. g. DOLD ND 5016, ND5019

• According to IEC/EN 62 020 • for AC and pulsating DC currants Type A to IEC/TR 60755 • 9 tripping values from 10 mA to 10 A or from 10 mA ... 30 A • Frequency range 20 ... 2000 Hz • Selection of manual or automatic reset • With prewarning • With test and reset button • Broken wire detection • Short reaction time • With adjustable delay tv • De-energized on trip • LED indication for auxiliary supply and state of contact • 2 x 1 changeover contact • With sealable cover • Devices available in 3 enclosure versions: IL 5882: 63 mm deep with terminals near to the bottom to be mounted in consumer units or industrial distribution systems according to DIN 43 880 - width 35 mm - for connection of external residual current transformer, e. g. DOLD ND 5016, ND5019

Semi-automatic rotary table pallet wrapper, model ECO/A, complete with: - Photocell for reading pallet height - Digital panel with 3 wrapping programs (up, up-down-manual) - Soft start inverter - Manual film block/cut and automatic wrapping cycle - Reset button for repositioning the film at the base of the column - Foldable column for ease of transportation - Forklift-compatible base - Mechanical clutch for film tensioning Operation: Place the pallet on the platform, secure the film to the base, select the wrapping program, and press the start button. The machine automatically begins wrapping and stops. Cut the film manually. Stretch film for wrapping machines: The film commonly used on wrapping machines is 23 microns. The film can also be used in 30 microns, suitable for protecting the pallet contents from sunlight.

The Lh500 baler is an excellent option for businesses with a large volume of cardboard or plastic film. The compaction cylinders of the LH500 are mounted on the sides of the baler meaning this machine has a low operation height of 2.249 meters, Perfect for stores with low ceiling heights. This Baler has as an auto compaction cycle as standard, key locked E-stop with reset button, hour counter to monitor servicing and includes a safe strap bale eject system for easy removal of bales onto a pallet. There are 6 tying points to tie off the bales from this baler.

his Baler has as an auto compaction cycle as standard, key locked E-stop with reset button, hour counter to monitor servicing and includes a safe strap bale eject system for easy removal of bales onto a pallet. The 100 baler makes a cardboard bale of 100 kg and a plastic film bale of up to 140 kg. The MACFAB 100 can make 2-4 bales per hour depending on the material and site conditions. The bales are normally tied off with 9mm strapping and the baler holds 4 rolls of strapping above the door for easy access.

Wireless and Bluetooth connectivity combined Wireless operation for two-motor drive systems, double electric bed base: The receiver has a built-in 2.4GHz two-way radio controller, as well as a built-in Bluetooth chip for connecting to Android and iOS devices. It can be combined with 2.4 GHz two-way wireless portable transmitters. The device also has an integrated triple floor lamp, a button for the reset function and a blue LED operating status display for the Bluetooth function. The pairing process is easy thanks to confirmed visual feedback – so users can see the connection status at a glance. Another useful feature is the custom programmable memory function. This allows multiple defined and stored positions to be controlled at the push of a button. Ergonomic and elegant in design The receiver stands out above all due to its ergonomic and simple design, without screw connections.

The HE150 control unit has been created with a focus on performance and maximum comfort. It connects to the Okimat 4 motor and can control the raising and lowering functions as well as relaxing massage functions, with two motors for single beds and four for double beds. In addition, it has two built-in LEDs that illuminate the floor under the bed, creating an atmosphere of vigilance in dark rooms. The simple installation of the HE150 control unit makes it possible to quickly adapt to electrically adjustable slats. Up to four MM01 motors can be connected to the HE150, allowing for complex, customized and individual movements. To ensure a stable and safe power supply, a voltage source with protection is required. In case of voltage fluctuations, the device automatically shuts down, and afterwards users can use the reset button on the control unit. The HE150 is also equipped with Bluetooth®, allowing smartphones or tablets with the OKIN SMART REMOTE app to replace the remote control.

Compur Statox 502 Control - and Common Alarm Module The All – Rounder in Gas Detection No matter if you want to detect toxic or combustible gases: This control module works with any sensor head. It provides the power supply and processes the signal. Three highly rated relays and a 4 – 20 mA output are the interfaces to peripheral instrumentation. Potential front ends may be the Statox 501 or Statox 505 transmitters with electrochemical or infrared sensors, or sensor heads with a Wheatstone bridge signal such as Statox 501 PID, catalytic or the Statox 501 LC and MC series with infrared sensors. Just by the push of a button you can program the module to handle 4 – 20 mA sink or source. Even the bridge voltage can be set to any value between 2 and 5.2 V, it even works with sensor heads of other manufacturers. So there is no restriction at all when selecting the appropriate sensor head for you application. With its two “sense” lines it can even compensate the voltage drop in the cable for very remote sensor heads or if there are extreme temperature variations. For maximum flexibility the measuring range is user programmable. You can also select the unit, no matter if it is ppb, ppm, % LEL or % volume. Easy installation The control module is mounted on a standard DIN rail. With an optional power rail you can interface the 24 V DC power and the alarm signals. This way you can program one of the modules to operate as a common alarm module. Even this function can be programmed just by push button. The application of a control module as a common alarm module is a very useful feature. It displays when any of the modules goes into Alarm 1, 2 or system alarm, and controls peripheral alarm devices. All electrical contacts are located easily accessible on the front side. The terminals for alarm signals, analog output, sensor head connection run into 6 pluggable terminal blocks. This makes not only the first installation quick and easy, but also any service event or system modification. A module can easily be removed out of its row, without interrupting its neighbors or disconnecting wires. Intuitive User Interface You want a gas detection system that needs little or no attention. No matter if setting the initial parameters or performing scheduled calibrations or proof tests: The handling shall be safe, quick and easy. The password - protected Statox 502 software structure is so clear that most menu items are self - explanatory. The “Reset” button brings you time back into the measuring mode at any time. Even if you have to interrupt your work and forget to reset, the watchdog function returns the system into the measuring mode, if no button has been pushed for a while. Functional safety paired with utmost system flexibility The Statox 502 complies with the standards DIN EN 61508 and 61511 functional safety, level SIL 2. In context with the HRC or ARE sensor heads you can create a complete gas detection system for combustible gases complying with SIL 2 standard. In larger installations signals of gas detectors often run into SIL certified process control systems, in smaller plants there is a need for a control module complying with SIL requirements. As any combination sensor head / control module forms a complete gas detection system, this system closes the gap. It is expandable without limits, and there is no restriction to the mix of sensor heads connected. Connecting other front ends The versatility of the Statox 502 does not end with gas detection. You can connect any front end providing a 4 – 20 mA analog signal or a Wheatstone bridge signal. So you can create your own compact control system for a variety of sensors with just one type control device. Accessories Useful accessories such as calibration adapters, intrinsically safe repeaters, Power supplies etc. complete the system. 205 VAC, 8 A min. make or break power >/= 12 V, 10 mA, contakte silver / nickel

Illuminated mushroom button with turn reset EFBL / Ø40

Mushroom - head button with turn reset EFB / Ø30

Illuminated mushroom button with turn reset MFBL

Mushroom - head button with key reset MFC Ø40

Mushroom - head button with turn reset EFB/Ø40 or EFB/Ø60 PROTECTION DEGREE IP 65: EL, ELE, EFB, EFC, ES, ESC, EM, EMB. IP 55: ER, ERR, ERL, EF, EFL, EFBL, EFBA, ESL. (IP 65 with protection cap) IP 40: EPD, EPDR (IP 65 with protection cap)

Mushroom - head button with turn reset MFB - Ø40 or Ø60

Dual illuminated push button with 1 extended button START-STOP EPDLR / 0-I

Pilot light ML

Illuminated mushroom button MFL