Bus systems - Import export

Bus technology has advanced over the last few years in industrial automation. The connectors required for data transmission are very bus-specific in their design. To access the very complex world of bus technology, CONEC offers connectors for Profibus DP, Device- Net and Industrial Ethernet 10 Gbit. Profibus is a manufacture-dependent, open field bus system for a variety of applications in manufacturing, processing and building automation. Industrial Ethernet is the general term for all applications that use the Ethernet standard to network devices used in industrial automation.

Our modular fieldbus and remote I/O-systems offer a comprehensive range of solutions for factory and process automation with interfaces for the fieldbus protocols PROFIBUS-DP, DeviceNet™, CANopen, Modbus TCP, Ethernet/IP™ and PROFINET. excom® is a remote-I/O-system in IP20 for Ex and non-Ex areas. You can plan and implement tailor-made solutions for the I/O IP20 area with the universal BL20 bus terminal system. The modular IP67 fieldbus systems BL67 and piconet® can be mounted directly in the field.

New product 2016: Microprecision Electronics SA étend les possibilités de sa série de MP700 étanche de fin de course en réponse à la tendance de l’industrie pour connecter les interrupteurs de position comme un dispositif de détection pour les systèmes de bus industriels. Pour faciliter l’interfaçage à un boîtier de distribution, un connecteur M12 est intégré directement dans le boitier de l’interrupteur. Cela permet une connexion par câble plus simple et flexible par rapport à la solution du câble surmoulé dans le boîtier. Cette option est disponible pour nos boîtiers en 30mm et 35mm représentant les dimensions « EN » en 20mm et « US » en 25mm pour l’entraxe des trous de montage. Les boîtiers métalliques pour des applications extérieures exigeantes, ainsi que les boîtiers plastiques pour une utilisation en intérieur sont à même d’offrir cette nouvelle option. Une version de connecteur à cinq pins est utilisée dans les cas de boîtiers métalliques MP740-60 et une à quatre pins...

The chainflex® bus cables are available for all well-known industrial bus systems such as Profibus, Interbus, Profinet, Ethernet, CAN-Bus, DeviceNet, ASi or CC link. Depending on the cable family, they can be used for torsion, for severe climatic conditions, for narrow radii, or particularly long travel distances, at high speeds and accelerations. Tested in the igus® laboratory with millions of cycles in e-chains®, they provide guaranteed safety against failure. -Bending radii up to 7,5xd -Jacket materials: PVC, iguPUR, PUR or TPE -For flexing applications -For medium duty applications -For extremely heavy duty applications -For twistable use -For heaviest duty applications in rail vehicles -For increased tensile load -Overall shield Flame retardant

- Requirements: For extremely heavy duty applications - Outer jacket: TPE - Hydrolysis and microbe-resistant - Silicone-free - UV-resistant - Oil resistance: Oil-resistant according to DIN EN 60811-404, resistant to organic oils according to VDMA 24568 with Plantocut 8 S-MB by DEA

Safe energy and data transmission The igus® Chainflex® cable range offers a choice of over 850 different cables, available from stock. A main focus of the range are the data and bus cables. Solutions based on copper, glass or plastic fiber optic cables are provided for almost all bus systems in industrial use. We continue to provide you with all supply cables for your drive systems such as motor cables with and without brake/tacho cables and the matching feed cables. Ready assembled with plugs and sockets on request. Cost-reducing assembly The use of pre-assembled E-ChainSystems® enables expensive assembly hours at the place of installation to be considerably reduced. Functionally tested systems guarantee that plant components are soon put into operation. Assembly service We would be pleased to send you an offer for complete solutions, including all assembly services. You do not tie up your own resources and you have a trouble-free energy supply system for the future at a fixed price. LBT FLIZZ® - High speeds and accelerations Travel distances up to 120m, travel speed up to 8 m/s Suitable for moving or stationary controls, ideal for all bus systems When light weight is required When quiet, maintenance-free operation is required When rust-proof property is required At -10°C to +60°C constant temperature At accelerations over 10 m/s² Energy supply system for all media, not only electrical Also suitable for outdoor use (with reduced load data) Your benefit from LBT FLIZZ® Guaranteed service life Cost-effective compared with conventional energy supply systems Cable protected against dirt, rain, sun, ice, snow and leaves Insensitive to wind and motion Good resistance to chemicals, solvents, etc. Use of special cables possible, e.g. servo drive cables, fiber optic cables, bus systems etc. almost maintenance free Quick and easy installation due to delivery as a ready-assembled system Easy integration with existing plants Cable length 50% of the travel distance No central cable junction No effort required to maintain carriages Sewage treatment plant Longitudinal scrapers Sand traps Rain water overflow reservoir Galvanizing equipment Cranes Plant construction Space-saving and compact energy supply with LBT FLIZZ® - low maintenance system, delivered pre-fitted with ready-assembled igus® E-Chain Energy supply system protected from wind and weathering. The used materials are weather-resistant, as well as resistant against most chemicals, oils, fats, coolants and solvents Solid plastic with powder-coated support tubes Modular assembly: the system can be enclosed with intermediate panels! Can be delivered pre-fitted Variable fields, which are simply screwed on top of each other Glide rail integrated in the profile

UniPower 12-48V CAN-Bus System

The Windows software ControlCenterSeries30 (CCS30) communicates with KELLER devices that are connected to the PC via an interface converter. The computer program displays current pressure values and curves, records measurements and exports them as a CSV file. The configuration details (e.g. zero point settings, output signal or comparison data) can also be displayed and edited. Up to 128 KELLER devices can be connected together to form a bus system and displayed simultaneously.

• Universal use with various enclosure types • High current (5 A per pcb-rail) • Quick and easy mounting in the DIN-rail • Contour and layout of the bus pcb can be adapted according to customers' requirements e.g. defined by the customer • Designed for standard DIN-rail dimensions • Optional coding of the bus system to prevent incorrect assembly • Large stand-off to DIN-rail floor allows the mounting of SMD components on the bus pcb underside • The carrier profile is securely fixed by safety caps (left and right) on the DIN-rail • Pcb rail "breaks" are possible, e.g. for operation of bus signals inside instruments

The LEO3 digital manometers also output the pressure values as an analog signal for display purposes and have an RS485 interface for integration in bus systems and communication with computers. The current 4...20 mA measured value is shown on the display at the same time as the pressure value. The minimum or maximum value since the last reset can also be displayed at the touch of a button. Power is supplied directly via the 4...20 mA circuit.

The controller is a fieldbus device for the control of up to 7 power modules from the modular heating System from Kendrion, which are directly connected via the module bus. In addition to system monitoring, the controller can also control or regulate the individual output channels of all power modules. Actual temperature values can be delivered directly via CAN fieldbus or provided by a higher-level controller e.g. a PLC. ; PROFINET Fieldbus interface; Independent control of up to 7 induction generators; System monitoring, temperature control; Integrated I/Os and CAN system bus

Adjustment of workstation systems through to complex mechanical engineering systems Lifting columns are the ideal drive elements when a motor setting is required in addition to the stable guidance. The whole technology is integrated and not visible from the outside. These lifting columns do not need any additional coverings. Usually, no special electrical knowledge will be required for the commissioning. Various versions are available as standard for the application in the field of medical technology. Several lifting columns can be combined and synchronised and offer further impressive application possibilities. The MultiControl-units can be linked by a BUS-system and enable the synchronization of maximal 32 lifting columns. The right Lifting column, quickly and easily Use our online product finder and compare lifting columns with each other, receive catalogue and CAD data or request the desired products directly.

The controller is a fieldbus device for the control of up to 7 power modules from the modular heating System from Kendrion, which are directly connected via the module bus. In addition to system monitoring, the controller can also control or regulate the individual output channels of all power modules. Actual temperature values can be delivered directly via CAN fieldbus or provided by a higher-level controller e.g. a PLC.

The controller is a fieldbus device for the control of up to 7 power modules from the modular heating System from Kendrion, which are directly connected via the module bus. In addition to system monitoring, the controller can also control or regulate the individual output channels of all power modules. Actual temperature values can be delivered directly via CAN fieldbus or provided by a higher-level controller e.g. a PLC.

CAN (Controller Area Network) is a network concept that has been developed for the automotive industry originally. Today, CAN is especially used in networking industrial control systems, sensors and actuators based on the field bus technology. In our CAN-bus training you will learn about the physical properties of a CAN-bus system as well as protocol structure. The participants will look into the theory of hardware and software design and improve their knowledge in practical units. This CAN-bus training course forms the basis for our advanced-level workshops on CANopen and J1939. Target group CAN-bus training The target group of the CAN-bus workshop is development engineers who are looking for a quick start into the ISO standard 11898-1:2015 (Road vehicles – Controller Area Network). Also, we address decision makers and product managers to enable them to assess the suitability of the CAN-bus standard for their applications.

As vital components for electrical power distribution in telecommunication satellites and land-based arms systems, the bus bars and battery bus bars developed by Axon’ Cable ensure reliable and constant distribution of power. Advantages mass reduction : aluminium bars (Aluminium 1050A is 3 times lighter than copper) improved heat dissipation : flat shape electrical performance : high conductivity of pure aluminium Construction flexible or rigid mono-layer or multi-layers (several potentials) double electrical insulation between each conductor Ceramic coating for better mechanical resistance Interconnection of bars : ESA wires, aluminium bars or multi braid links Interface connectors : D-Sub connectors, Axon' power connectors with low contact resistance Applications Telecommunication satellites : Our busbars can distribute energy in satellite. Different components of a battery (cells, bypass, shunt, connectors,etc) Solar panels to the voltage regulation unit

In industry and transport, M12 connectors are used for sensor / actor wiring as well as for BUS systems. Increasing time pressure due to short time-to-market requirements and high cost pressure make it necessary to build systems quickly, flexibly and reliably. During implementation, easy field attachable connectors play a crucial role. The new CONEC M12 field attachable connector with screw connection offers the appropriate solution and is available in codings A, B, D, and X.

In industry and transport, M12 connectors are used for sensor/actor wiring as well as for BUS systems. Increasing time pressure due to short time-to-market requirements and high cost pressure make it necessary to build systems quickly, flexibly and reliably. During implementation, easy field attachable connectors play a crucial role. The new CONEC M12 field attachable connector with crimp connection offers the appropriate solution and is available in codings A, B, D, and X.

Corrosion resistant, light Aluminium heat exchanger Efficiency up to %108,5 Modulation ratio 71 12 different capacities (830 kW to 3250 kW) Cascade system with 16 boilers Workıng pressure 6 bar High combustion performance with low exhaust emission Different zone controls with Siemens control panel Compability with Open Therm ve BUS comunication systems Easy to use and maintenance

Discover the easy handling and flexible usage of our Hydraulic testers of the PPC series. Learn more about these testing devices on our special microsite. Pls. click here The PPC Pad is the highest-performance unit of the PPC series. This portable multi-function hand-held measuring instrument has been especially developed for the increasing fluid technology requirements. STAUFF‘s CAN bus sensors take advantage of the bus system‘s automatic sensor recognition to provide an easy-to-install Plug & Play solution. The measured values can be displayed in various presentation styles and make effective solutions-orientated analysis possible. ▪ Portable multi-function hand-held measuring instrument ▪ Pressure, temperature, flow and speed can be measured, monitored and analysed ▪ Measurement and display of over 50 channels ▪ Measured value display: numerical, bar graph, pointer, curve graph ▪ Project templates can be saved and loaded ▪ Interfaces: CAN, LAN, USB ▪ Total memory with up to 1..

Corrosion resistant, light Aluminium heat exchanger Efficiency upto %107 Five different capacities for Ongas 300 (70, 95, 125, 155, 190* kW) Nine different capacities for Ongas 600 from 230 kW to 850* kW Cascade system with 16 boilers Workıng pressure 6 bar High combustion performance with low exhaust emission Different zone controls with Siemens control panel 17 modulation ration Compability with Open Therm ve BUS comunication systems Low noise level Easy to use and maintenance

Corrosion resistant, light Aluminium heat exchanger Efficiency upto %109 Five capacities options (70 , 95, 125, 155, 190* kW) Cascade system with 16 boilers 17 modulation ration Workıng pressure 6 bar High combustion performance with low exhaust emission Different zone controls with Siemens control panel Compability with Open Therm ve BUS comunication systems External chimney flap Low noise level Easy to use and maintenance

Almost all automation solutions are provided with electronic or electronic computer-aided control. An important element in the implementation of your requirements are Programmable Logic Controllers (PLCs). Automation Technology / Electronics: We manufacture the necessary control for your application from project planning, production, programming to service. Configuration: Analysis of the control process Working out the tax concept Drawing and documentation creation by certified electrical engineers with EPlan P8 Optimal component selection Programming: Programmable logic controllers Industrial PC / bus and network systems Operating and visualization systems Remote maintenance systems cabinet mechanical machining Structure / wiring Testing and measurement Machine installation: wiring Connection of sensors and actuators commissioning Handover and service Service: overhaul software change revision

Concept of RCE control system The control system is a fully digital controlled system. This means there are only digital signal processors (DSP) involved in the entire control system and not any analogue electronic component. All the components of the control system (such as control cabinet, welding power source, each axis and the teach pendant) are linked by a digital bus system. A full digital robot control system brings the following advantages: No influence by any environmental disturbance like inductive fields of welding cables Quickest response time by fastest bus connection > smooth motion of robot Absolute reproducibility of welding result > highest consistency in welding quality Easy diagnosis possibilities of the entire robot control system > less skills and no special instruments for diagnosis are necessary By using modular drive technology and standard PC components a high reliability is guaranteed and the ability to remain constantly at the cutting edge of...

With TesTWinner® TesT has developed a system which enables the user to arrange nearly every imaginable test procedure freely and, most notably, very easy. By stringing together and by parameterizing, a limited number of preset macro instructions permits the designing of complex test procedures without requiring any programming knowledge. TesTWinner® possesses a library with approx. 300 programs acc. to national and international norms as well as customer-specific regulations. TesTWinner® is more than a mere machine control unit and offers furthermore many additional functions such as real-time-calculations and illustrations of derived values e.g. clamping, strain, adhesion factors, etc. Also, the generation of statistics, a report editor, the import of external signals, the communication with CAN / LIN bus systems and much more is possible. The software is compatible to all current Windows operating systems.

Positioning system with protection class IP 65 for damp area applications The PSS 30x-8 positioning systems are intelligent, compact solutions for the automatic adjustment of auxiliary and positioning axes comprising an EC-motor, gear, controller, measuring system and bus interface. The absolute measuring system eliminates the need for time-consuming reference runs. Direct measurement of the position at the output shaft ensures highly accurate positioning. The galvanically separated supply voltages for the control and performance electronics permit the implementation of an emergency shut-off function without interrupting communication with the control module.

Positioning system with protection class IP 68 for wet area applications in hygienic design The PSW 30x-8 positioning systems are intelligent, compact solutions for the automatic adjustment of auxiliary and positioning axes comprising an EC-motor, gear, controller, measuring system and bus interface. The absolute measuring system eliminates the need for time-consuming reference runs. Direct measurement of the position at the output shaft ensures highly accurate positioning. The galvanically separated supply voltages for the control and performance electronics permit the implementation of an emergency shut-off function without interrupting communication with the control module.

PSD 48 direct drive is a mechatronic system with integrated control, bus interface and absolute measurement system without battery. This drive is ideal for automatic format changeover. The stepper motor with integrated control and bus communication permits higher velocities at lower torques. The PSD can be easily addressed by rotary switches (not for IO-Link). The instruments can be mounted on a spindle using the hollow shaft without the need for an additional coupling. The optional rotatable attachment housing allows you to attach the direct drives to the machine in any position, no angle plugs are required.