Brush system - Import export

Installed at the line infeed of granular products such as peas/flageolet beans, it extracts small size waste and sticky waste as well as large waste. Machine primarily comprised of a drum of which the perforations of the final section are adapted to the product processed. Continuous cleaning of the machine thanks to its system of brushes and scrapers. Products to be processed exit from the 3rd section of the drum. Collection and discharge of waste thanks to a conveyor inside the drum (except for small size waste at the beginning of the machine).

Installed at the inletof the line for granular products such as peas/flageolets, it removes small waste, sticky waste as well as large waste. Machine mainly consisting of a drum whose perforations in the final section are adapted to the product being treated. Continuous cleaning of the machine thanks to its system of brushes and scrapers. Exit of the products to be treated under the 3rd section of the drum. Recovery and evacuation of waste thanks to a belt conveyor placed inside the drum (except for small waste at the beginning of the machine).

Removes and sorts small pieces of long shaped products of the green bean, carrot, salsify, etc. type. Machine comprised primarily of a drum fitted with plastic pockets and a conveyor inside the drum to collect the small pieces from the flow of products. Different pocket diameters are available according to your needs. The machine is continuously cleaned thanks to its system of brushes and CIP(clean in place ).

igubal® flange bearing EFOM With 2 mounting holes igubal® flange bearing EFOM igubal® flange bearing EFSM With 4 mounting holes, dimensional series E igubal® flange bearing EFSM igubal® flange bearing KFSM-GT With 4 mounting holes, dimensional series K igubal® flange bearing KFSM-GT igubal® flange bearing EFOM HT Applicable up to 200°C,resistant to chemicals , with 2 mounting holes igubal® flange bearing EFOM HT igubal® flange bearing EFSM HT Applicable up to 200°C,resistant to chemicals , with 4 mounting holes igubal® flange bearing EFSM HT igubal® flange bearing with ball pins, male thread igubal® flange bearing with ball pins - male threads for direct connections igubal® flange bearing with ball pins, male thread igubal® flange bearing with ball pins, female thread igubal® flange bearing with ball pins, female threads for direct connections igubal® flange bearing with ball pins, female thread igubal® flange bearings were developed for the bearing of shaft extensions or shaft bushings. Like all igubal® products, they consist of an igumid G housing and an iglidur® W300 spherical ball. igubal® flange bearings correspond to the dimensional series E and are offered with 2 or 4 mounting holes. Features igubal® flange bearings were developed for the bearing of shaft ends or shaft bushings. Like all igubal® products, it consists of a housing made of igumid G and a spherical ball in iglidur® W300. igubal® flange bearings correspond to the dimensional series E and are offered with 2 or 4 mounting holes. Application area As the igubal® flange bearings are also suitable for dry operation, they are particularly considered for applications in which the installation site is difficult, in humid or wet environment, or with special demands on hygiene. Thus the igubal® flange bearings are used for instance in wash-brush controls, in facade sunscreen systems, in materials handling systems and in bakery equipment. igubal® flange bearing - Applications Installation According to type, igubal® flange bearing are designed for mounting with 2 or 4 holes. The 2-hole types are provided with oblong holes that enable a trouble-free readjustment. A precise alignment of the bearing housing is not required as the flange bearing automatically compensates for error. Delivery program For shafts, igubal® flange bearings with 2 and 4 mounting holes are available in standard dimensions of 5 to 50 mm. For delivery times and more dimensions, you may please contact us. When to use it? When chemical resistance is required When a low-cost alternative is desired When dirt-resistant bearings are needed When misalignments should be compensated When fully split components are needed When not to use? When temperatures above +200°C prevail When an integrated collar is required When dimensions over 50 mm are needed When rotation speeds in excess of 0.5 m/s should be implemented igubal® flange bearing EFOM With 2 mounting holes igubal® flange bearing EFOM igubal® flange bearing EFSM With 4 mounting holes, dimensional series E igubal® flange bearing EFSM igubal® flange bearing KFSM-GT With 4 mounting holes, dimensional series K igubal® flange bearing KFSM-GT igubal® flange bearing EFOM HT Applicable up to 200°C,resistant to chemicals , with 2 mounting holes igubal® flange bearing EFOM HT igubal® flange bearing EFSM HT Applicable up to 200°C,resistant to chemicals , with 4 mounting holes igubal® flange bearing EFSM HT igubal® flange bearing with ball pins, male thread igubal® flange bearing with ball pins - male threads for direct connections igubal® flange bearing with ball pins, male thread igubal® flange bearing with ball pins, female thread igubal® flange bearing with ball pins, female threads for direct connections igubal® flange bearing with ball pins, female thread

The ST-system above all is suitable for roller brushes fitted to a shaft or tubular core with journals made of steel or stainless steel (1.4301; 1.4541). All available fill material qualities and fill configurations can be used.The available core systems are: shaft WK1, tubular core WK2 resp. WK4.The maximum peripheral speed for this brush type is 15 m/sec. Fill Densities high fill density EA1, medium fill density EA2, low fill density EA3. Fill Configurations Compressed face EA1 - EA3, spiral EB and strips ED1.

Tyrolit offers cup brushes for angle grinders and straight grinders that are user-friendly, safe and flexible. Whether steel, stainless steel or non-ferrous metals - our cup brushes clean materials efficiently and precisely. They remove rust, paint, varnish and scale, clean weld seams and prepare surfaces for further processing. Cup brushes for angle grinders Our cup brushes with the SHIELD system provide targeted protection against dust and wire breakage while you have an unrestricted view of your workpiece. Choosing the right type of wire is crucial. Our premium products offer flexibility, high quality and a long service life. Cup brushes for straight grinders Wire types are the key to perfect results. We offer brass-plated steel wire to prevent corrosion, stainless steel to prevent rust formation and hardened steel wire for additional service life.

Kullen-Koti roller brushes 302 are indeed unique and easy-to-handle: you only purchase the roller brush core once and easily refill it yourself with the corresponding strip brushes after wear. And besides, it is a very economical brush system. The ruged construction allows problem-free operation also in adverse conditions. Roller brushes type 302 consit of a tubular steel or stainless steel core and exchangeable strip brushes which are mounted in axial direction around the circumference. The brush core can be supplied either with journals or with arbor hole for mounting on the existing primary shaft. With the roller brush type 302 (mS) the strip brushes are fixed in side flanges. With type 302 (oS) the strip brushes are fixed directly on the tubular core with clamping plates. Fill configuration to choose: bent in axial direction, left-hand or right-hand pitch or in chevron pattern i. e. left hand and right-hand pitch starting at the centre. Strip brushes needed around the...

MyIon is an innovative, wearable air sterilizer which uses advanced air ionizing technology to eliminate all harmful airborne particles: PM 2.5, dust, allergens and viruses. "For people to be and stay healthy, they must breathe clean air from their first breath to their last" Dr Flavia Bustreo, Assistant Director General at World Health Organisation Presentation Breathe Clean, Healthy Air - Wherever You Go! MyIon is a superb device for creating a safe environment at any time and in any occasion - whatever you do, wherever you might be. Using a unique built-in carbon fibre brush system, MyIon releases massive 20 millions of negative ions per cm3, creating an invisible barrier that prevents dangerous particles from entering the respiratory system. Negative ions purify the air by magnetically attracting to pollutants until these newly-formed larger particles become too heavy to remain in our breathing zone. Negative ion – A Treasure of Nature Given to You

MyIon is an innovative, wearable air sterilizer which uses advanced air ionizing technology to eliminate all harmful airborne particles: - PM 2.5, dust, allergens and viruses. "For people to be and stay healthy, they must breathe clean air from their first breath to their last" Dr Flavia Bustreo, Assistant Director General at World Health Organisation Presentation Breathe Clean, Healthy Air - Wherever You Go! MyIon is a superb device for creating a safe environment at any time and in any occasion - whatever you do, wherever you might be. Using a unique built-in carbon fibre brush system, MyIon releases massive 18 millions of negative ions per cm3, creating an invisible barrier that prevents dangerous particles from entering the respiratory system. Negative ions purify the air by magnetically attracting to pollutants until these newly-formed larger particles become too heavy to remain in our breathing zone. Negative ion – A Treasure of Nature Given to You

MyIon is an innovative, wearable air sterilizer which uses advanced air ionizing technology to eliminate all harmful airborne particles: - PM 2.5, dust, allergens and viruses. "For people to be and stay healthy, they must breathe clean air from their first breath to their last" Dr Flavia Bustreo, Assistant Director General at World Health Organisation Presentation Breathe Clean, Healthy Air - Wherever You Go! MyIon is a superb device for creating a safe environment at any time and in any occasion - whatever you do, wherever you might be. Using a unique built-in carbon fibre brush system, MyIon releases massive 18 millions of negative ions per cm3, creating an invisible barrier that prevents dangerous particles from entering the respiratory system. Negative ions purify the air by magnetically attracting to pollutants until these newly-formed larger particles become too heavy to remain in our breathing zone. Negative ion – A Treasure of Nature Given to You

Rotary Transducer with Angle Measurement Option CheckStar sets the standard for dynamic torque and angle measurement of all continuous drive and impulse tools, with proven reliable performance in thousands of applications worldwide. CheckStar transducers fit in-line between the assembly tool and the fastener, measuring the actual torques applied under production conditions. Whatever the vibration and shock loads experienced, CheckStar's patented contact system ensures contact is always maintained between the readout and the strain gauges. Inferior systems suffer from "brush bounce" that leads to unreliable torque readings. The low inertia design of CheckStar ensures accurate and repeatable measurement of high speed transients, such as the point of shut-off on continuous drive tools and the pulsing of impulse tools.

* Adopts fully automatic PLC computer control system, which has faster operation speed, lower failure rate, and can be upgraded remotely. * Adopts thickened hot dipped galvanized steel material, sturdy and durable. * 5 brushes (1 vertical lift top brush + 2 small vertical brushes + 2 large vertical brushes). * Strong water cleaning system and foam pump system. * Multiple functions: water washing-----foam-----brushing-----wax water washing. * With fault identification code, the fault is easy to identify and eliminate.

Automatic AC voltage stabilizer Electromechanical structure It works with Brush-Charcoal system driven by motor 2kVA - 1000kVA power range Production at Single Phase and Three Phase Low Voltage Correction up to 30% High Voltage Correction up to 15% Response time: 40msec Voltage correction time: 1-3 seconds Slow and safe 100% Unbalanced Voltage and Load Capacity Independent voltage management on each phase Efficiency >96% Periodic maintenance is required Input voltage range is determined at the order Output Voltmeter and Signal Lamp TS EN ISO 9001: 2015 Quality Certified

KLIP 39 VERTICAL is a vertical insect screen characterized by high mechanical durability due to the long lasting components that make it highly responsive and completely in line to the most recent market trends. In addition, the 39 mm roll up box has rounded corners to fit easily into doors and windows of all types, combining economy and ergonomics benefits, while unique optional solutions such as brake for spring, and security brush add value to the system and offer complete satisfaction to the end user down to the last detail. Operation: Manual with reset spring, Recommended use: Windows, Mesh: Fiberglass Stiff, colored grey, Closing with: Standard brush, More options (upon request): Security brush, Black colored mesh, In DIY KIT version and in specific dimensions, Telescopic caps

- Injection device for all kind of waffles; - Robot destined to the automatic removal of waffles; - Automatic brushes; - Cleaning system; - Lubrication system of the waffle irons.

To address the most stringent demands in terms of cutting output, high precision, automation and process reliability BEHRINGER HBM series high-performance automatic bandsawing machines offer an impressive package of benefits, guaranteed not only by their vibration-damping structure made of grey cast iron components and the saw frame with its centric flow of forces. The sensitive BEHRINGER feed control also helps protect the saw blade, ensuring even greater economy through a long tool service life. By using a servo feed system, a high cutting performance is achieved when sawing tool and stainless steels and materials such as Hastelloy or Inconel with difficult machining properties. A highly efficient chip brush system cleans the saw blade on both sides from any adhering sawing chips.

The compact walkbehind carpet cleaner Cleanserv C34 is a genuine powerhouse. Equipped with extremely efficient technology, this machine is ideal for cleaning small to mediumsized areas fast and reliably. Its cylindrical brush system allows working on almost all textile floors. Two squeegees providing a high suction performance ensure that only a minimum of residual moisture remains on the floor. After a short drying time, the cleaned area can be used again. 

An ionic body brush with bronze wire fibres for an energetic massage. Only 5 minutes daily are relaxing, revitalising and strengthen the body's immune system. Brush the whole body daily according to instructions.

Frequently, a production run starts or ends with the automatic feeding or removal of workpieces. Our feeders and stackers are produced in various capacity levels, with vacuum suction traverses, with or without pit. The VEN BRUSH system equipment Solutions possible with the VEN MOVE series cover several functions such as rotating, turning, transferring, stacking, feeding, accumulation, separation or allocation.

Venjakob/Nutro offers a wide spectrum of material handling systems, from simple, manual systems to fully automatic "non-contact" operation. Venjakob/Nutro is able to provide customer-specific constructions for automatic feeding and delivery as well as integrate transport devices or material handling robots in the spraying plant. The VEN BRUSH system equipment Solutions possible with the VEN MOVE series cover several functions such as rotating, turning, transferring, stacking, feeding, accumulation, separation or allocation.

The VEN BRUSH system technology is based on high pressure at low speed. Special hold-down brushes with wide support brushes or narrow support brushes for processing profiled workpieces, ensure the required pressure. For the pretreatment of workpieces of varying shapes or extremely fluctuating sizes, maximum perfection and flexibility are provided by the motor-driven height adjustment of each individual unit as well as by the infinite rotational speed setting. The high-performance vacuum transport belt ensures reliable transport and holds both small as well as large format workpieces in place. A Molton roller is built in to ensure constant cleaning of the conveyor belt. Unit diversity results in a wide performance spectrum and generates a high economic effect. The basis version of VEN BRUSH allows a selection of 2 unit positions to up to 5 unit positions. To be prepared for possibly changing requirements in your production process, you can also select the next larger variant and equip the free unit position as required at a later date. System examples for possible operating widths from 600 to 3,500 and operating lengths from 2,000 to 5,500 mm. Depending on your production requirements, you can individually select from: Short change times and high operating comfort are possible thanks to the quick-exchange brush system using a push-in system together with a coupling. The optional infinite angle setting of the round brushes permits impeccable edge processing. The use of the structured brush unit is intended for special surface processing. This brush is used to structurise furniture parts, hardwood and softwood, flooring boards or to provide an antique look of up to 1 mm deep at a throughfeed speed of 10 m/min. Where required, the VEN BRUSH can be extended by a dust removal system with rotating blow nozzles and ionisation system. Following a brushing or sanding/grinding effect, this complementary function ensures optimum workpiece cleanliness to meet high requirements. As an individual solution, VEN BRUSH convinces as a station in a Venjakob machine line or when integrated in an existing machine line. As such, control system configuration takes all interfaces into account, through to higher ranking control and monitoring. The high-performance system technology can be easily operated directly using a control panel or a touch panel.

At the time of workpiece transfer, a change is made from longitudinal transport to crosswise transport. In contrast to curve conveyors, angular transfer systems operate in cycles. Depending on the requirement, they can be planned as collecting or separating device. Possible configurations include 90° or 180° belt, chain or rake cross conveyors. A rake or crank rocker linkage or an electro-pneumatic control can be used to transfer workpieces from lenthwise to crosswise or vice versa. The VEN BRUSH system equipment Solutions possible with the VEN MOVE series cover several functions such as rotating, turning, transferring, stacking, feeding, accumulation, separation or allocation.

The processing of both faces of a workpiece requires a professional turning solution. The turning process (Fig. 1) with lane change shown, achieves a very high turning capacity while simultaneously safeguarding the quality of the parts to be processed. Workpiece processing often requires turning from longitudinal to cross and vice versa. A cone and crank rocker linkage represent a simple and safe possibility to turn workpieces. (Fig. 3) The VEN BRUSH system equipment Solutions possible with the VEN MOVE series cover several functions such as rotating, turning, transferring, stacking, feeding, accumulation, separation or allocation.

Source One Environmental is a re-seller of the full range of Picote products. A huge range of products is available from stock in the UK, with next-day delivery to mainland UK customers. Products include: The full range of Miller machines, available in 5 different sizes Compatible tools for: Cutting Cleaning Liner removal Concrete removal Retrieving items from pipes The Picote Brush Coating System The Sentinal Liner Guard Technical support is available from our Picote-trained staff and from Picote’s own technical team.

Alpha manufactures a very wide range of one and two part solvent based adhesives that can be applied by brush, spray system, roller or spreader. Product bases include Neoprene, Polyurethane, Nitrile, SBR & Natural Rubber. Many products offer resistance to wide temperature ranges as well as giving high bond strengths and varying open times. A number of products such as S889, S5001, SN1314, S708, DP2205 are also MOD approved. ** Ask for a quote **