Booster pump - Import export

Pressure Boosting Pumps series TH and FH use closed impellers in order to minimize power consumption and to optimize hydraulic pump efficiencies. In addition, the TH series offers high pressures at short immersion depths. Inline pumps of the series FH can be used as boosting pumps if provided with positive inlet pressure. This inlet pressure can be provided by the central coolant supply or a feed pump. In such a setup, pumps of the series FH can raise the incoming pressure by up to 26 bar. A frequency converter can be supplied for special applications or for matching the pump characteristic to a specific duty point. See page "Control/Regulation" in the Technical Information Volumetric delivery: up to 640 l/min Delivery head: up to 520 m Horizontal cutter pumps

The reliable booster pump for the polymer process. BOOSTER gear pumps from WITTE are used in the polymerisation process to increase the pressure of medium to high viscosity media. The hydraulically heated booster pump conveys very gently prepolymers and polymers, such as PET, PBT, PS, ABS and many others. Heating is by means of heat transfer oil or steam. The core components such as shafts and slide bearings come from the WITTE modular system. The booster pumps of the BOOSTER series are used wherever particularly high pressure is required for the process. High pressures are required for pelletising, fibre production or for spinning pumps, among others. The design of the BOOSTER booster pumps can be adapted to the needs of the plant and the customer's requirements.

Aldea BLT 4-16 DN32 vertical shaft booster, stainless steel, multistage centrifugal pump, has features such as high efficiency, low noise, stable operation. The pump set adopts vertical multi-stage structure without self-priming, which makes the product compact, easy to install, use and maintain. High-efficiency standard motor, Japanese NSK bearings and cold-rolled 50ww800 silicon steel sheet make the pump high-efficiency, low-noise and maintenance-free. Fully enclosed shaft seal, IP55 protection class, F class insulation class, special “double lock” drive end bearing enable the pump to withstand higher inlet pressure.

Aldea BLT 4-12 DN32 vertical shaft booster, stainless steel, multistage centrifugal pump, has features such as high efficiency, low noise, stable operation. The pump set adopts vertical multi-stage structure without self-priming, which makes the product compact, easy to install, use and maintain. High-efficiency standard motor, Japanese NSK bearings and cold-rolled 50ww800 silicon steel sheet make the pump high-efficiency, low-noise and maintenance-free. Fully enclosed shaft seal, IP55 protection class, F class insulation class, special “double lock” drive end bearing enable the pump to withstand higher inlet pressure.

Aldea BLT 2-18 DN25 vertical shaft booster, stainless steel, multistage centrifugal pump, has features such as high efficiency, low noise, stable operation. The pump set adopts vertical multi-stage structure without self-priming, which makes the product compact, easy to install, use and maintain. High-efficiency standard motor, Japanese NSK bearings and cold-rolled 50ww800 silicon steel sheet make the pump high-efficiency, low-noise and maintenance-free. Fully enclosed shaft seal, IP55 protection class, F class insulation class, special “double lock” drive end bearing enable the pump to withstand higher inlet pressure.

Aldea BLT series vertical shaft booster, stainless steel, multistage centrifugal pump, has features such as high efficiency, low noise, stable operation. The pump set adopts vertical multi-stage structure without self-priming, which makes the product compact, easy to install, use and maintain. High-efficiency standard motor, Japanese NSK bearings and cold-rolled 50ww800 silicon steel sheet make the pump high-efficiency, low-noise and maintenance-free. Fully enclosed shaft seal, IP55 protection class, F class insulation class, special “double lock” drive end bearing enable the pump to withstand higher inlet pressure.

Aldea BLT 8-3 DN40 vertical shaft booster, stainless steel, multistage centrifugal pump, has features such as high efficiency, low noise, stable operation. The pump set adopts vertical multi-stage structure without self-priming, which makes the product compact, easy to install, use and maintain. High-efficiency standard motor, Japanese NSK bearings and cold-rolled 50ww800 silicon steel sheet make the pump high-efficiency, low-noise and maintenance-free. Fully enclosed shaft seal, IP55 protection class, F class insulation class, special “double lock” drive end bearing enable the pump to withstand higher inlet pressure.

Aldea BLT 8-14 DN40 vertical shaft booster, stainless steel, multistage centrifugal pump, has features such as high efficiency, low noise, stable operation. The pump set adopts vertical multi-stage structure without self-priming, which makes the product compact, easy to install, use and maintain. High-efficiency standard motor, Japanese NSK bearings and cold-rolled 50ww800 silicon steel sheet make the pump high-efficiency, low-noise and maintenance-free. Fully enclosed shaft seal, IP55 protection class, F class insulation class, special “double lock” drive end bearing enable the pump to withstand higher inlet pressure.

Aldea BLT 4-22 DN32 vertical shaft booster, stainless steel, multistage centrifugal pump, has features such as high efficiency, low noise, stable operation. The pump set adopts vertical multi-stage structure without self-priming, which makes the product compact, easy to install, use and maintain. High-efficiency standard motor, Japanese NSK bearings and cold-rolled 50ww800 silicon steel sheet make the pump high-efficiency, low-noise and maintenance-free. Fully enclosed shaft seal, IP55 protection class, F class insulation class, special “double lock” drive end bearing enable the pump to withstand higher inlet pressure.

Aldea BLT 4-19 DN32 vertical shaft booster, stainless steel, multistage centrifugal pump, has features such as high efficiency, low noise, stable operation. The pump set adopts vertical multi-stage structure without self-priming, which makes the product compact, easy to install, use and maintain. High-efficiency standard motor, Japanese NSK bearings and cold-rolled 50ww800 silicon steel sheet make the pump high-efficiency, low-noise and maintenance-free. Fully enclosed shaft seal, IP55 protection class, F class insulation class, special “double lock” drive end bearing enable the pump to withstand higher inlet pressure.

Pump Types Maintenance Partners provides services on a broad range of pump types, for example: Vacuum pumps Centrifugal pumps Multi stage pumps Boiler feed pumps Deep well pumps Booster pumps Canned motor pumps Barrel pumps Rotary vane pumps All Brands of Pumps As an independent service provider, we are able to provide services for any brand or manufacturer of pumps, including: ACEC, Alfa Laval, Allweiler, Andritz, Bornemann, Bran + Luebbe, Byron Jackson, David Brown Pumps, DB Union, Dresser, Ebara, Ensival-Moret, Finder, Flowserve, Gardner Denver, Habermann, Hayward Tyler, Herborner, Hermetic, Houttuin, Ingersoll-Rand, Johnson, KSB, lowara, Maag, Metso, Mitsubishi, Nash, Roots, Ruhrpumpen, Sihi, Sterling, Sterling, Stork, Sulzer, Torishima, Victor, Vogel, Vogelsang, Wedapump, Weir, Worthington, … Pump Services Our services range from standard inspections and repairs to complete overhauls. A repair or overhaul of a pump generally consists of an Inspection, Repair/Modification...

Melt pump for building up pressure in the polymer process. The series is the result of a complete revision of the core components used. The BOOSTER-AT is available with flange connections according to EN1092-1 and ANSI B16.5. Thanks to the new gear wheel geometries, differential pressures of up to 320 bar are possible with selected pump sizes. The new design is rounded off by the usual variety of different material combinations. Advantages: Higher efficiency, therefore Less temperature input into the polymer Wider viscosity range possible Larger volume flow range possible Increased safety against shaft breakage in case of overload due to new design

Global energy consumption is constantly rising. The raw material required for vehicle operation, energy production and other products is predominantly based on crude oil and natural gas. Screw pumps are often used in the production of these valuable commodities. For decades, Leistritz has been an expert partner for the oil and gas industry, whether for pumping tasks in crude oil production using multi-phase pumps, transfer and injection pumps or in the transportation of crude oil using booster or pipeline start-up pumps. Leistritz pumps are also used in refinery processes.

Suitable for the recovery, compaction and drying of sand from aggregate washing. Our cyclonic separation units are extremely high-performing and efficient thanks to the latest generation of pumps and rotors made of wear-resistant material. The system is composed of the water + sand receiving tank, suction head or immersion booster pump, hydrocyclone for sand compaction and vibro-dryer for drainage and drying. Available in various ranges according to the flow to be achieved.